{"title":"Engine Management \u0026 Tuning","description":"","products":[{"product_id":"afe-scorcher-gt-power-module-vb-subaru-wrx-77-46803","title":"aFe Scorcher GT Power Module for VB 2022+ Subaru WRX (77-46803)","description":"\u003cp\u003eIn just 30 minutes, you can significantly boost your vehicle's power with the aFe POWER SCORCHER GT Module. It comes with a high-quality case and wire harness featuring factory-style connectors for a seamless plug-and-play installation. The module includes an LED light switch for in-cabin, on-the-fly power adjustments, allowing you to toggle between four power settings with a single button: Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red). This performance module enhances turbo boost, improving both vehicle performance and throttle response. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e \u003cbr\u003e2022+ Subaru WRX VB\u003cbr\u003e(2.4 Liter Turbo FA24T) \u003cbr\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eaFe POWER does not recommend to use with any other tuners or modules. aFe POWER recommends to use the SCORCHER GT module in Sport or Sport+ settings during towing.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eInstallation:\u003c\/span\u003e\u003cbr\u003e• \u003ca style=\"color: #afafaf; text-decoration: underline;\" href=\"https:\/\/afepower.com\/media\/catalog\/product\/file\/7\/7\/77-46803_ins_1.pdf\" target=\"blank\"\u003e Install PDF Instructions\u003c\/a\u003e \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures \u0026amp; Specs:\u003c\/span\u003e \u003cbr\u003e• Dyno tested and produced power increases of +32 HP and +31 lbs. x ft. Torque in race mode at 5,319 RPM \u003cbr\u003e• Quick and easy plug \u0026amp; play installation without any modifications \u003cbr\u003e• Around 30 minutes installation \u003cbr\u003e• Increase turbo boost to improve vehicle performance, efficiency and throttle response \u003cbr\u003e• In-Cabin On-the-Fly Power Adjustments via LED light switch \u003cbr\u003e• 4-power position settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red) \u003cbr\u003e• Leaves no trace on ECU (No Footprint) \u003cbr\u003e• High quality case \u0026amp; wire harness w\/ OEM style connectors \u003cbr\u003e• High reliability, 100% of units tested \u003cbr\u003e• Compatible with other aFe POWER performance products \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore from aFe Power:\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDirect Plug \u0026amp; Play Power:\u003c\/strong\u003e\u003cbr\u003eThis quick and easy plug \u0026amp; play SCORCHER GT module adds significant power by altering pressure sensor signals to increase turbo boost to improve vehicle efficiency, power and throttle response. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIn-Cabin On-the-Fly Power Adjustments:\u003c\/strong\u003e\u003cbr\u003eSCORCHER GT modules features In-Cabin On-the-Fly power adjustment to accommodate any situation. This adjustment is controlled by via LED light switch with a button that can be easily mounted in any location in the cabin. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHigh Quality Case \u0026amp; Wire Harness:\u003c\/strong\u003e\u003cbr\u003eaFe SCORCHER GT modules uses high quality aluminum extrusion black powder-coated enclosure casing and factory style connectors which requires no modification to your factory harness. These factory style connectors plug directly into the stock wiring harness connectors and sensors. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHigh Precision and Quality:\u003c\/strong\u003e\u003cbr\u003eSCORCHER GT modules are 100% tested for proper protection. These modules work amazingly on stock vehicles and are optimized for maximum performance with use of aFe POWER performance products. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEMISSIONS DISCLAIMER\u003c\/strong\u003e\u003cbr\u003eThis product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. \u003cbr\u003e\u003c\/p\u003e\n\u003ca style=\"color: #afafaf;\" href=\"https:\/\/stmtuned.com\/collections\/afe-power-products\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more AFE Power Parts\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"aFe Power","offers":[{"title":"Default Title","offer_id":50560381190486,"sku":"aFe-77-46803","price":462.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/afe-scorcher-gt-power-module-vb-subaru-wrx-77-46803.jpg?v=1749192388"},{"product_id":"afe-scorcher-blue-bluetooth-power-module-g8x-bmw-m3-m4-77-86326","title":"aFe Scorcher Blue Bluetooth Power Module for G8X BMW M3\/M4 (77-86326)","description":"\u003cp\u003eaFe POWER SCORCHER BLUE Power modules are the next generation of plug-and-play electronic module technology. It is the fastest way to safely gain significant horsepower, torque and improve drivability without modifying or leaving any trace on the Engine Control Unit (ECU). The SCORCHER BLUE features an LED control switch for in-cabin, on-the-fly power adjustments with different preset modes. With Bluetooth connectivity you can tap into your iOS or Android device to make power adjustments, custom tune different power modes, view gauges for engine parameters, upgrade to the latest version, measure acceleration times and more. The app is downloadable for free on the App Store or Google Play store. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e \u003cbr\u003e2021+ BMW M3 (G80)\u003cbr\u003e2021+ BMW M4 (G82\/G83)  \u003cbr\u003e2021+ BMW X3 M (F97)\u003cbr\u003e2021+ BMW X4 M (F98) \u003cbr\u003e\u003cbr\u003e• \u003ca style=\"color: #afafaf; text-decoration: underline;\" href=\"https:\/\/afepower.com\/media\/catalog\/product\/file\/7\/7\/77-86326_ins_1.pdf\" target=\"blank\"\u003e Install PDF Instructions\u003c\/a\u003e \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures \u0026amp; Specs:\u003c\/span\u003e \u003cbr\u003e• Dyno tested and produced significant power increases of +44 HP \/ +73 lbs. x ft. torque in race mode at 3,185 RPM \u003cbr\u003e• Next generation of plug \u0026amp; play Bluetooth power module \u003cbr\u003e• Increase turbo boost to improve vehicle performance, efficiency and throttle response \u003cbr\u003e• In-Cabin On-the-Fly Power Adjustments via LED light switch or Smartphone App \u003cbr\u003e• Bluetooth Connectivity to your iOS or Android Smartphone to Adjust Power Modes, Custom Tune Power Modes, or Upgrade the Device to the Latest Version \u003cbr\u003e• Four Power Position Settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red) \u003cbr\u003e• Does Not Modify the ECU and Leaves No Trace (No Footprint) \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore from aFe Power:\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eIncreases Power and Performance:\u003c\/strong\u003e\u003cbr\u003eThe SCORCHER BLUE Power module increases turbo boost and overall vehicle performance, producing double-digit power gains on our in-house dyno. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDirect Plug-and-Play Power:\u003c\/strong\u003e\u003cbr\u003eDesigned with factory-style connectors, it easily connects to engine sensors for a quick and simple install. The LED control switch can be routed through the firewall into the cabin or connect to the module via Bluetooth with the smartphone app. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOn-the-Fly Power Adjustments:\u003c\/strong\u003e\u003cbr\u003eIn-cabin, on-the-fly power adjustments can be made to accommodate your driving needs. Select one of four power settings on the in-cab LED control switch or control the module remotely via the free iOS or android app. The smartphone connects to the module via Bluetooth and displays engine parameters (MAP). \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4 Power Settings:\u003c\/strong\u003e\u003cbr\u003eThis power module has four power settings loaded and identifiable with the LED light on the switch or smartphone app: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red). \u003cbr\u003e\u003c\/p\u003e\n\u003ca style=\"color: #afafaf;\" href=\"https:\/\/stmtuned.com\/collections\/afe-power-products\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more AFE Power Parts\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"aFe Power","offers":[{"title":"Default Title","offer_id":50560780992854,"sku":"aFe-77-86326","price":580.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/afe-scorcher-blue-bluetooth-power-module-g8x-bmw-m3-m4-77-86326.jpg?v=1749195141"},{"product_id":"afe-sprint-booster-v3-power-converter-f8x-g8x-bmw-m2-m3-m4-77-16302","title":"aFe Sprint Booster V3 Power Converter for F8X\/G8X BMW M2\/M3\/M4 (77-16302)","description":"\u003cp\u003eThe aFe Power Sprint Booster V3 power converter for F8X and G8X series BMW M2, M3 and M4 models will improve your throttle response and overall drivability with 3 dynamic acceleration modes for a crisp, smooth launch. Features a valet mode and pedal lock PIN code to keep your TRX under control. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e \u003cbr\u003e2021+ BMW M3 G80\u003cbr\u003e2021+ BMW M4 G82 G83 \u003cbr\u003e2023+ BMW M2 G87\u003cbr\u003e2015-2018 BMW M3 F80\u003cbr\u003e2015-2020 BMW M4 F82\/F83\u003cbr\u003e2016-2021 BMW M2 F87 \u003cbr\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/afepower.com\/media\/catalog\/product\/file\/s\/p\/sprint_booster_v3_installation_guide_11.pdf\" style=\"color: #afafaf; text-decoration: underline;\" target=\"blank\"\u003e Install PDF Instructions\u003c\/a\u003e \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures \u0026amp; Specs:\u003c\/span\u003e \u003cbr\u003e• Simple, plug-and-play installation \u003cbr\u003e• Ultra compact device mounts in the cabin \u003cbr\u003e• Three acceleration modes w\/ 18 acceleration programs \u003cbr\u003e• Valet and pedal lock mode provide protection against unauthorized vehicle use \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore from aFe Power:\u003c\/span\u003e\u003cbr\u003eAutomobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to the wheels. The ETC system (Electronic Throttle Control), also known as drive-by-wire, has the unfortunate downside of delayed throttle response and subdued acceleration, creating problems in certain circumstances such as up-hill starts, quick gear changes, overtaking, etc. The Sprint Booster aims to overcome this throttle response delay for ETC-equipped vehicles, providing crisp on-tap acceleration at the driver's disposal. \u003cbr\u003e\u003cbr\u003eSimple Plug-and-Play Installation:\u003cbr\u003eFor vehicles with electronic control (ETC) systems, or drive by wire, this device plugs into the OE connector located behind the accelerator pedal. It's a simple installation, requiring no cutting of any wires or interference of the automobile's electronics. It does not affect other systems such as electronic injection, ABS, etc.\u003cbr\u003e\u003cbr\u003eThree Acceleration Modes:\u003cbr\u003eThe three main acceleration modes can be switched by pressing the main button. When the LED is off, the Sprint Booster is deactivated, and the car has factory settings. In Sport Mode, the LED is green, and throttle response is improved by up to 30%. With the red colored LED, the Sprint Booster is in Race Mode, and it improves response by up to 60%.\u003cbr\u003e\u003cbr\u003e18 Acceleration Programs:\u003cbr\u003eEach acceleration mode comes with nine programs. Select 1-9 in SPORT mode and 1-9 in RACE mode, with '1' being the least aggressive program and '9' the most aggressive. The acceleration programs can be changed using the two arrow buttons on the top of the device. By selecting the desired acceleration program in each mode, the driver can fine-tune each mode per their driving style (e.g. select SPORT 9 \u0026amp; RACE 5).\u003cbr\u003e\u003cbr\u003eValet and Pedal Lock Modes:\u003cbr\u003eValet mode limits the acceleration of the vehicle by 55%, 65%, or 75% (comes in three selectable levels). It is activated and deactivated with a three-digit PIN. By limiting the acceleration, there will be a significant reduction in the vehicle's performance. The Pedal Lock mode provides extra protection against unauthorized vehicle use. The driver can deactivate the acceleration ability of the vehicle through a 3 digit PIN. The menu for Valet and Pedal Lock mode is accessed when the vehicle is stationary and the Sprint Booster is off, by pressing the two arrow buttons simultaneously.\u003cbr\u003e\u003cbr\u003eBetter Drivability:\u003cbr\u003eIn addition to increased throttle response for effortless downshifts and safer overtaking, there is also a noticeable improvement to the transmission’s shifts (on vehicles equipped with automatic transmissions).\u003cbr\u003e\u003cbr\u003eEmissions Disclaimer:\u003cbr\u003eThis product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eAlso Fits:\u003c\/span\u003e \u003cbr\u003e2011-2015 1 series (N13\/N20\/N52\/N54\/N55) \u003cbr\u003e2011 1M (N54) \u003cbr\u003e2014-2021 2 series (N20\/B46\/N55) \u003cbr\u003e2014-2016 M235i (N55) \u003cbr\u003e2017-2021 M240i (B58) \u003cbr\u003e2005-2019 3 series (M54\/M56\/M57\/N20\/N26\/N47\/N52\/N54\/N55\/B46\/B48\/B58) \u003cbr\u003e2020-2024 M340i (B58) \u003cbr\u003e2002-2006 M3 (S54) \u003cbr\u003e2008-2011 M3 (S65) \u003cbr\u003e2017-2024 4 series (B46\/B48\/B58) \u003cbr\u003e2021-2024 M440i (B58) \u003cbr\u003e2000-2002 Z3 (M54) \u003cbr\u003e2000-2002 Z3 M (S54) \u003cbr\u003e2003-2005 Z4 (M54) \u003cbr\u003e2006-2008 Z4 (N52) \u003cbr\u003e2009-2016 Z4 (N54\/N20) \u003cbr\u003e2019+ Z4 (B58\/B48) \u003cbr\u003e2006-2008 Z4 M (S54) \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ca href=\"https:\/\/stmtuned.com\/collections\/afe-power-products\" style=\"color: #afafaf;\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more AFE Power Parts\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"aFe Power","offers":[{"title":"Default Title","offer_id":50560784564566,"sku":"aFe-77-16302","price":303.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/afe-sprint-booster-v3-power-converter-f8x-g8x-bmw-m2-m3-m4-77-16302.jpg?v=1749195173"},{"product_id":"injen-throttle-controller-toyota-gr-corolla-pt0014b","title":"Injen X-Pedal Pro Throttle Controller for 2023 Toyota GR Corolla (PT0014B)","description":"Experience a transformed driving feel on your Toyota GR Corolla with Injen's Throttle Controller, eliminating factory throttle delay for instant response. Enjoy ECO mode for fuel efficiency and Sport mode with launch control. Compatible with both Automatic and Manual transmissions for enhanced performance. This is a quick and easy install for amazing results to enhance performance and bring your GR Corolla to life! \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e \u003cbr\u003e2023+ Toyota GR Corolla \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures \u0026amp; Specs:\u003c\/span\u003e \u003cbr\u003e• The sleek, black anodized aluminum housing provides an elegant aesthetic inside the cabin. \u003cbr\u003e• Quick and simple plug-and-play installation requires no cutting or splicing of any wires. \u003cbr\u003e• Provides increased throttle response for safer passing and an improved driving experience. \u003cbr\u003e• The X-Pedal Pro Black Edition is warranty friendly and will not leave a footprint after removal. \u003cbr\u003e• Works seamlessly with both Automatic and Manual transmissions. \u003cbr\u003e• Automatic Transmission equipped vehicles will notice a marked improvement in shifting performance. \u003cbr\u003e• The X-Pedal Pro Black Edition is compatible with most Aftermarket Programmers. \u003cbr\u003e• The built-in high-speed processor greatly improves throttle signal response time \u003cbr\u003e• Sport Mode: 9 levels, suitable for mountain roads and racing \u003cbr\u003e• ECO Mode: 7 levels, for driving in city areas which can improve fuel economy \u003cbr\u003e• Anti-skid function helps on lower friction surfaces with ease Launch Control\/Drag Race Mode: Gets you to reach max acceleration faster \u003cbr\u003e• DAC (Digital to Analog Convert) - provides 1000 times\/sec processing speed \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eCalifornia Residents Note:\u003c\/span\u003e\u003cbr\u003eThis part is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore from Injen:\u003c\/span\u003e\u003cbr\u003e\u003cem\u003e\"The Injen Technology X-Pedal Pro Black Edition is the next step in customizable throttle response controllers. Quickly and easily tune out the delayed throttle response from the factory with Injen’s X-Pedal Pro Black Edition for a completely new driving experience. You’ll be amazed how different your vehicle feels after this quick and simple install! \u003cbr\u003e\u003cbr\u003eModern vehicles are infamous for a sluggish and delayed throttle response feel directly from the factory. You’ll recognize this built-in delay when trying to accelerate to pass another vehicle or merging into traffic. Injen Technology’s X-Pedal Pro Black Edition allows you to adjust the pedal feel and ultimately the throttle response of your vehicle directly on the fly. \u003cbr\u003e\u003cbr\u003eThe X-Pedal Pro Black Edition is a plug-in module that requires less than 5 minutes to install. Our harness plugs directly into the OE connector behind the accelerator pedal to pull 5V power and manipulate the signals going to the ECU. The X-Pedal Pro Black Edition requires no splicing or cutting of any wires and does not interfere with other onboard systems, such as electronic injection, ABS brakes systems, etcetera. \u003cbr\u003e\u003cbr\u003eOnce installed, the X-Pedal Pro Black edition delivers immediate, customized performance for your vehicle. Specifically, the X-Pedal Pro Black Edition controls the throttle signals going into your stock ECU (Engine Control Unit) so that your vehicle instantly responds faster and accelerates swifter... or slower and more economically, depending on how you program the X-Pedal Pro Black Edition. With 9 levels of sport mode for crisp, on-demand throttle response and 7 levels of ECO mode for improved fuel efficiency, you’ll have an infinite amount of adjustability to match your specific driving style and performance needs.\"\u003c\/em\u003e \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eAlso Fits:\u003c\/span\u003e\u003cbr\u003e2014-2021 TOYOTA COROLLA \u003cbr\u003e2018-2020 TOYOTA CAMRY \u003cbr\u003e2015-2020 LEXUS RC350 \u003cbr\u003e2014-2020 LEXUS IS350 \u003cbr\u003e2018-2020 LEXUS IS300 \u003cbr\u003e2013-2020 LEXUS GS350 \u003cbr\u003e2016-2017 LEXUS IS200T \u003cbr\u003e2016 LEXUS RC200T \u003cbr\u003e2014 LEXUS IS250 \u003cbr\u003e2013 LEXUS CT 200H","brand":"Injen","offers":[{"title":"Default Title","offer_id":50561084260694,"sku":"INJ-PT0014B","price":244.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/injen-throttle-controller-toyota-gr-corolla-pt0014b.jpg?v=1749196823"},{"product_id":"injen-x-pedal-throttle-controller-audi-s3-pt0009b","title":"Injen X-PEDAL Throttle Controller for 2015+ Audi S3 (PT0009B)","description":"The Injen Technology X-Pedal Pro Black Edition Throttle Controller for the 2015-2020 Audi S3 allows you to tune out the delayed throttle response from the factory. You’ll be amazed how different your vehicle feels after this quick and easy plug-and-play installation. With ECO mode to help improve fuel economy, and Sport mode with launch control for racing. This Injen Throttle Controller is compatible with both Automatic and Manual transmissions to deliver improved throttle response and performance. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e \u003cbr\u003e2015-2020 Audi S3 (L4-2.0L Turbo) \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures \u0026amp; Specs:\u003c\/span\u003e \u003cbr\u003e• The sleek, black anodized aluminum housing provides an elegant aesthetic inside the cabin. \u003cbr\u003e• Quick and simple plug-and-play installation requires no cutting or splicing of any wires. \u003cbr\u003e• Provides increased throttle response for safer passing and an improved driving experience. \u003cbr\u003e• The X-Pedal Pro Black Edition is warranty friendly and will not leave a footprint after removal. \u003cbr\u003e• Works seamlessly with both Automatic and Manual transmissions. \u003cbr\u003e• Automatic Transmission equipped vehicles will notice a marked improvement in shifting performance. \u003cbr\u003e• The X-Pedal Pro Black Edition is compatible with most Aftermarket Programmers. \u003cbr\u003e• The built-in high-speed processor greatly improves throttle signal response time \u003cbr\u003e• Sport Mode: 9 levels, suitable for mountain roads and racing \u003cbr\u003e• ECO Mode: 7 levels, for driving in city areas which can improve fuel economy \u003cbr\u003e• Anti-skid function helps on lower friction surfaces with ease \u003cbr\u003e• Launch Control\/Drag Race Mode: Gets you to reach max acceleration faster \u003cbr\u003e• DAC (Digital to Analog Convert) - provides 1000 times\/sec processing speed \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eCalifornia Residents Note:\u003c\/span\u003e\u003cbr\u003eThis part is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore from Injen:\u003c\/span\u003e\u003cbr\u003e\u003cem\u003e\"The Injen Technology X-Pedal Pro Black Edition is the next step in customizable throttle response controllers. Quickly and easily tune out the delayed throttle response from the factory with Injen’s X-Pedal Pro Black Edition for a completely new driving experience. You’ll be amazed how different your vehicle feels after this quick and simple install!\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eModern vehicles are infamous for a sluggish and delayed throttle response feel directly from the factory. You’ll recognize this built-in delay when trying to accelerate to pass another vehicle or merging into traffic. Injen Technology’s X-Pedal Pro Black Edition allows you to adjust the pedal feel and ultimately the throttle response of your vehicle directly on the fly.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eThe X-Pedal Pro Black Edition is a plug-in module that requires less than 5 minutes to install. Our harness plugs directly into the OE connector behind the accelerator pedal to pull 5V power and manipulate the signals going to the ECU. The X-Pedal Pro Black Edition requires no splicing or cutting of any wires and does not interfere with other onboard systems, such as electronic injection, ABS brakes systems, etcetera.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eOnce installed, the X-Pedal Pro Black edition delivers immediate, customized performance for your vehicle. Specifically, the X-Pedal Pro Black Edition controls the throttle signals going into your stock ECU (Engine Control Unit) so that your vehicle instantly responds faster and accelerates swifter... or slower and more economically – depending on how you program the X-Pedal Pro Black Edition. With 9 levels of sport mode for crisp, on-demand throttle response and 7 levels of ECO mode for improved fuel efficiency, you’ll have an infinite amount of adjustability to match your specific driving style and performance needs.\"\u003c\/em\u003e \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eAlso Fits:\u003c\/span\u003e \u003cbr\u003e2015-2016 Audi A3 (L4-1.8L Turbo) \u003cbr\u003e2006-2020 Audi A3 (L4-2.0L Turbo) \u003cbr\u003e2017-2020 Audi A3 (Quattro L4-2.0L Turbo) \u003cbr\u003e2010-2016 Audi A4 (L4-2.0L Turbo) \u003cbr\u003e2010-2019 Audi A5 (L4-2.0L Turbo) \u003cbr\u003e2016-2018 Audi A6 (L4-2.0L Turbo) \u003cbr\u003e2012-2018 Audi A6 (V6-3.0L Supercharged) \u003cbr\u003e2012-2018 Audi A7 (V6-3.0L Supercharged) \u003cbr\u003e2010-2017 Audi S4 (V6-3.0L Supercharged) \u003cbr\u003e2017-2022 Audi S4 (L4-3.0L Turbo) \u003cbr\u003e2010-2017 Audi S5 (V6-3.0L Supercharged)\u003cbr\u003e2018-2022 Audi S5 (V6-3.0L Turbo)","brand":"Injen","offers":[{"title":"Default Title","offer_id":50561120502102,"sku":"INJ-PT0009B","price":237.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/injen-x-pedal-throttle-controller-audi-s3-pt0009b.jpg?v=1749197010"},{"product_id":"dsx-paddle-wire-break-out-motec-r8-huracan","title":"DSX Paddle Wire Break Out for Motec V10 R8 Huracan","description":"The DSX Tuning paddle wire break out kit aids in installing a Motec into your V10 R8 or Huracan by breaking out the upshift wires from the factory engine harness without the hassle of trying to tie into the wiring of the TCU connector. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2010-2023 Audi R8 (V10)\u003cbr\u003e2015-2024 Lamborghini Huracan\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore Info:\u003c\/span\u003e\u003cbr\u003eThis plugs into a 14-way connector underneath the factory slave ECU, and it includes the 7.6kΩ resistor needed in the R8 paddle wire. There is a two-way DTM connector to allow you to easily connect to the break out. Based on which vehicle you have, you will need to connect the E14 wire of the Motec harness to the vehicle-appropriate pin.\u003cbr\u003e\u003cbr\u003e• Pin 1 - Huracan upshift\u003cbr\u003e• Pin 2 - R8 upshift","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":50561300562262,"sku":"DSX-V10-PWBO","price":243.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/dsx-paddle-wire-break-out-motec-r8-huracan-1.jpg?v=1749197549"},{"product_id":"77-12010-afe-sprint-booster-v3-ram-trx","title":"aFe Power Sprint Booster V3 for 2021+ Ram TRX (77-12010)","description":"The aFe Power Sprint Booster V3 power converter for 2021-2023 Ram TRX will improve your throttle response and overall drivability with 18 dynamic acceleration modes for a crisp, smooth launch. Features a valet mode and pedal lock PIN code to keep your TRX under control.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2021-2023 Dodge Ram TRX\u003cbr\u003e6.2L Supercharged Hemi V8\u003cbr\u003e• \u003ca href=\"https:\/\/afepower.com\/media\/catalog\/product\/files\/pdpfiles\/s\/p\/sprint_booster_v3_installation_guide_46.pdf\" style=\"color: #afafaf; text-decoration: underline;\" target=\"blank\"\u003e Install PDF Instructions\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures \u0026amp; Specs:\u003c\/span\u003e\u003cbr\u003e• Simple, plug-and-play installation\u003cbr\u003e• Ultra compact device mounts in the cabin\u003cbr\u003e• Three acceleration modes w\/ 18 acceleration programs\u003cbr\u003e• Valet and pedal lock mode provide protection against unauthorized vehicle use\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore from aFe Power:\u003c\/span\u003e\u003cbr\u003eAutomobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to the wheels. The ETC system (Electronic Throttle Control), also known as drive-by-wire, has the unfortunate downside of delayed throttle response and subdued acceleration, creating problems in certain circumstances such as up-hill starts, quick gear changes, overtaking, etc. The Sprint Booster aims to overcome this throttle response delay for ETC-equipped vehicles, providing crisp on-tap acceleration at the driver's disposal.\u003cbr\u003e\u003cbr\u003eSimple Plug-and-Play Installation:\u003cbr\u003eFor vehicles with electronic control (ETC) systems, or drive by wire, this device plugs into the OE connector located behind the accelerator pedal. It's a simple installation, requiring no cutting of any wires or interference of the automobile's electronics. It does not affect other systems such as electronic injection, ABS, etc.\u003cbr\u003e\u003cbr\u003eThree Acceleration Modes:\u003cbr\u003eThe three main acceleration modes can be switched by pressing the main button. When the LED is off, the Sprint Booster is deactivated, and the car has factory settings. In Sport Mode, the LED is green, and throttle response is improved by up to 30%. With the red colored LED, the Sprint Booster is in Race Mode, and it improves response by up to 60%.\u003cbr\u003e\u003cbr\u003e18 Acceleration Programs:\u003cbr\u003eEach acceleration mode comes with nine programs. Select 1-9 in SPORT mode and 1-9 in RACE mode, with '1' being the least aggressive program and '9' the most aggressive. The acceleration programs can be changed using the two arrow buttons on the top of the device. By selecting the desired acceleration program in each mode, the driver can fine-tune each mode per their driving style (e.g. select SPORT 9 \u0026amp; RACE 5).\u003cbr\u003e\u003cbr\u003eValet and Pedal Lock Modes:\u003cbr\u003eValet mode limits the acceleration of the vehicle by 55%, 65%, or 75% (comes in three selectable levels). It is activated and deactivated with a three-digit PIN. By limiting the acceleration, there will be a significant reduction in the vehicle's performance. The Pedal Lock mode provides extra protection against unauthorized vehicle use. The driver can deactivate the acceleration ability of the vehicle through a 3 digit PIN. The menu for Valet and Pedal Lock mode is accessed when the vehicle is stationary and the Sprint Booster is off, by pressing the two arrow buttons simultaneously.\u003cbr\u003e\u003cbr\u003eBetter Drivability:\u003cbr\u003eIn addition to increased throttle response for effortless downshifts and safer overtaking, there is also a noticeable improvement to the transmission’s shifts (on vehicles equipped with automatic transmissions).\u003cbr\u003e\u003cbr\u003eEmissions Disclaimer:\u003cbr\u003eThis product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/stmtuned.com\/collections\/afe-power-products\" style=\"color: #afafaf;\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more AFE Power Parts\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"aFe Power","offers":[{"title":"Default Title","offer_id":50561783234902,"sku":"aFe-77-12010","price":303.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/77-12010-afe-sprint-booster-v3-ram-trx-1.jpg?v=1749199350"},{"product_id":"ap3-sub-006-accessport-subaru-wrx-2022-manual","title":"COBB Accessport V3 for 2022-2023 WRX (AP3-SUB-006)","description":"The COBB Tuning AP3-SUB-006 Accessport V3 for 2022-2023 Subaru WRX offers simple ECU flashing and allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up race, street, or dyno gauge clusters) and mounting options. More processing power, memory and storage to flash faster while saving all of your maps and logs. This is your new Accessport. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e 2022-2023 Subaru WRX\u003cbr\u003e• Compatible with both Manual and CVT\u003cbr\u003e • Confirmed for USDM models only\u003cbr\u003e• \u003ca style=\"color: #afafaf; text-decoration: underline;\" href=\"https:\/\/www.cobbtuning.com\/products\/software\/accessport-manager\" target=\"blank\"\u003e Subaru Accessport Manager\u003c\/a\u003e\u003cbr\u003e • \u003ca style=\"color: #afafaf; text-decoration: underline;\" href=\"https:\/\/cobbtuning.atlassian.net\/wiki\/spaces\/PRS\/pages\/2722955265\/Map+Notes+for+VB+WRX\" target=\"blank\"\u003e Map Notes for VB WRX\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan style=\"color: #ff2a00;\"\u003eWhy You Need One:\u003c\/span\u003e\u003cbr\u003e The Accessport is the world's best selling, most flexible and easiest to use ECU upgrade solution for your WRX. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded Off The Shelf (OTS) maps or use custom mapping for any modification level. It's the last engine management solution you'll ever need!\u003cbr\u003e\u003cbr\u003e Simple Installation:\u003cbr\u003e Everything is included for the simple installation! Intuitive on-screen instructions identify your exact vehicle and available maps.\u003cbr\u003e\u003cbr\u003e Simple Uninstall:\u003cbr\u003e Revert your ECU to exactly as it was before with the easy to use Uninstall option from the main menu.\u003cbr\u003e\u003cbr\u003e Trouble Codes:\u003cbr\u003e Read engine trouble codes to diagnose issues. Clear them when resolved. Prevent expensive trips to the dealership.\u003cbr\u003e\u003cbr\u003e Change Maps:\u003cbr\u003e Store up to 100 maps from our OTS map database or from your favorite COBB tuner and quickly switch between them for any need.\u003cbr\u003e\u003cbr\u003e Gauges:\u003cbr\u003e Use your Accessport as a gauge to monitor boost or any other live information, directly from the ECU.\u003cbr\u003e\u003cbr\u003e Data Logging:\u003cbr\u003e Record multiple data channels simultaneously for in-depth evaluation of engine performance. Stores up to 10 hours.\u003cbr\u003e\u003cbr\u003e Performance Measuring:\u003cbr\u003eWelcome to your own performance evaluation suite! Measure 0-60 mph time, 60 foot and 1\/4 mile ET's and trap speed.\u003cbr\u003e\u003cbr\u003e Shift Light:\u003cbr\u003e Set custom RPM warning lights for perfect shifts every time.\u003cbr\u003e\u003cbr\u003e \u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/ZNSZao-4yP8\" height=\"563\" width=\"1000\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e \u003cspan style=\"color: #ff2a00;\"\u003eFeatures:\u003cbr\u003e\u003c\/span\u003e• Larger, full color, higher resolution screen\u003cbr\u003e • Customizable multi-gauge display\u003cbr\u003e • In vehicle mount, with on\/off switch\u003cbr\u003e • Faster and easier to use with a familiar face\u003cbr\u003e • Interchangeable faceplates\u003cbr\u003e \u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eCustomize your look!\u003c\/span\u003e\u003cbr\u003e \u003ca href=\"https:\/\/stmtuned.com\/products\/cobb-accessport-v3-faceplates\" style=\"color: #afafaf; text-decoration: underline;\"\u003e Accessport Faceplates (Sold separately)\u003cbr\u003e \u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan style=\"color: #ff2a00;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003e We are sorry, discounts are not available with COBB Products. \u003cbr\u003e\u003cbr\u003e \u003cspan style=\"color: #ff2a00;\"\u003eCOBB Emissions Statement:\u003c\/span\u003e\u003cbr\u003e This part is legal for sale and use on Emissions Controlled Vehicles in all 50 states when used in accordance with the manufacturer’s application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number.\u003cbr\u003e\u003cbr\u003e \u003ca style=\"color: #afafaf;\" href=\"https:\/\/stmtuned.com\/collections\/cobb-products\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more COBB Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"COBB","offers":[{"title":"Default Title","offer_id":50562099183958,"sku":"COBB-AP3-SUB-006","price":753.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/AP3-SUB-006-accessport-subaru-wrx-2022-manual-1.jpg?v=1749200362"},{"product_id":"ts-wh-499-torque-solution-sd-harness-2008-wrx-sti","title":"Torque Solution Speed Density Adapter Harness for 08-14 WRX\/04+STi (TS-WH-499)","description":"The Torque Solution plug and play speed density adapter harness for 08-14 WRX and 08-21 STi allows you to easily switch from a MAF setup to Speed Density (SD) without having to hack up your OEM harness.\u003cbr\u003e\u003cbr\u003eThis adapter harness is a direct plug and play with the OEM harness plug and GM Style AIT sensor, such as the \u003ca style=\"color: #afafaf; text-decoration: underline;\" href=\"https:\/\/stmtuned.com\/products\/aem-air-inlet-temperature-sensor-kit\"\u003e AEM (30-2010)\u003c\/a\u003e. Requires a bung to be welded for the AIT sensor either on the throttle body side of your TMIC or on your FMIC upper charge pipe right before the throttle body.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2008-2014 Subaru WRX (USDM\/JDM)\u003cbr\u003e2008-2021 Subaru STi (USDM\/JDM)\u003cbr\u003e• Welding required for install\u003cbr\u003e• Custom tuning required\u003cbr\u003e• Note this does not fit 2015+ WRX\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures:\u003c\/span\u003e\u003cbr\u003e• Plug and Play Adapter Harness\u003cbr\u003e• Direct Fit\u003cbr\u003e• Waterproof Connectors\u003cbr\u003e• 39\" Length\u003cbr\u003e• High Temp Wire Loom\u003cbr\u003e• Limited Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eIncludes:\u003c\/span\u003e\u003cbr\u003e(1) Harness\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/stmtuned.com\/collections\/torque-solution-products\" style=\"color: #afafaf;\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more Torque Solution Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":50562444591446,"sku":"TQS-TS-WH-499","price":64.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/TS-WH-499-torque-solution-sd-harness-2008-wrx-sti.jpg?v=1749201972"},{"product_id":"ts-wh-497-torque-solution-sd-harness-02-07-wrx-sti","title":"Torque Solution Speed Density Adapter Harness for 02-07 WRX\/STi (TS-WH-497)","description":"The Torque Solution plug and play speed density adapter harness for 2002-2007 WRX and STi allows you to easily switch from a MAF setup to Speed Density (SD) without having to hack up your OEM harness.\u003cbr\u003e\u003cbr\u003eThis adapter harness is a direct plug and play with the OEM harness plug and GM Style AIT sensor, such as the \u003ca href=\"https:\/\/stmtuned.com\/products\/aem-air-inlet-temperature-sensor-kit\" style=\"color: #afafaf; text-decoration: underline;\"\u003e AEM (30-2010)\u003c\/a\u003e. Requires a bung to be welded for the AIT sensor either on the throttle body side of your TMIC or on your FMIC upper charge pipe right before the throttle body.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2002-2007 Subaru WRX (USDM\/JDM)\u003cbr\u003e2002-2007 Subaru STi (USDM\/JDM)\u003cbr\u003e• Welding required for install\u003cbr\u003e• Custom tuning required \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures:\u003c\/span\u003e\u003cbr\u003e• Plug and Play Adapter Harness\u003cbr\u003e• Direct Fit\u003cbr\u003e• Waterproof Connectors\u003cbr\u003e• 48\" Length\u003cbr\u003e• High Temp Wire Loom\u003cbr\u003e• Limited Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eIncludes:\u003c\/span\u003e\u003cbr\u003e(1) Harness\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/stmtuned.com\/collections\/torque-solution-products\" style=\"color: #afafaf;\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more Torque Solution Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":50562446295382,"sku":"TQS-TS-WH-497","price":64.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/TS-WH-497-torque-solution-sd-harness-02-07-wrx-sti.jpg?v=1749201987"},{"product_id":"3c1600-cobb-can-gateway-harness-bracket-lhd-r35-gtr","title":"COBB CAN Gateway Harness \u0026 Bracket Kit for 2009-2018 R35 GTR (3C1600)","description":"This is the vehicle-specific harness and bracket for LHD R35 GTR needed to inject data from the COBB CAN Gateway into your CAN BUS. The harness consists of M12 industrial connections at the Gateway and an OEM grade connector for the vehicle-side. High-Temp PUR jackets and anti-chafe sleeving ensure the harness is protected in the engine bay.\u003cbr\u003e\u003cbr\u003eIn the past, adding custom sensors to your Accessport supported vehicle required highjacking of one of the car's factory 0-5v sensors. The Cobb CAN Gateway allows users to inject aftermarket sensor data to the car's ECU without taking over existing inputs. This means you are able to add features such as Flex Fuel or Fuel Pressure Safety to a car without having to remove any factory functionality.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2009-2018 Nissan R35 GT-R LDH\u003cbr\u003e• Fits left hand drive models only\u003cbr\u003e• 2019+ models are not listed as compatible\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures:\u003c\/span\u003e\u003cbr\u003e• Specific Bracket for LHD Vehicles\u003cbr\u003e• OEM Grade Vehicle-Side Connectors\u003cbr\u003e• M12 Industrial Connections to Gateway Module\u003cbr\u003e• High-Temp PUR Jackets and Anti-Chafe Sleeving\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003e We are sorry, discounts and codes are not available for COBB Products.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ffff00;\"\u003eCOBB Emissions Statement:\u003c\/span\u003e\u003cbr\u003e This part is in the process of external testing with the EO process ongoing. \u003cstrong\u003eNOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY EMISSION CONTROLLED MOTOR VEHICLE.\u003c\/strong\u003e While we believe that that these parts comply with EPA’s Anti-Tampering Policy we have not completed the testing\/CARB EO submission process.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/stmtuned.com\/collections\/cobb-products\" style=\"color: #afafaf;\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more COBB Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"COBB","offers":[{"title":"Default Title","offer_id":50562655093078,"sku":"COBB-3C1600","price":139.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/3C1600-cobb-can-gateway-harness-bracket-lhd-r35-gtr-2018-1.jpg?v=1749203424"},{"product_id":"860600-cobb-can-gateway-module-r35-gtr-2018","title":"COBB CAN Gateway Module Only for 2009-2018 R35 GTR (860600)","description":"In the past, adding custom sensors to your Accessport-supported vehicle required highjacking of one of the car's factory 0-5v sensors. The COBB CAN Gateway allows users to inject aftermarket sensor data to the car's ECU without taking over existing inputs. This means you are able to add features such as Flex Fuel or Fuel Pressure Safety to a car without having to remove any factory functionality.\u003cbr\u003e\u003cbr\u003eThe CAN Gateway Module Only option does not include a mounting bracket, wiring harness, or sensor attachments.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2009-2018 Nissan R35 GT-R\u003cbr\u003e(* 2019+ models are not listed as compatible)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures:\u003c\/span\u003e\u003cbr\u003e• 2x Digital or Analog Sensor Inputs\u003cbr\u003e• Vehicle Connection Port\u003cbr\u003e• Black Anodized Billet Aluminum Case\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003e We are sorry, discounts and codes are not available for COBB Products.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ffff00;\"\u003eCOBB Emissions Statement:\u003c\/span\u003e\u003cbr\u003e This part is in the process of external testing with the EO process ongoing. \u003cstrong\u003eNOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY EMISSION CONTROLLED MOTOR VEHICLE.\u003c\/strong\u003e While we believe that that these parts comply with EPA’s Anti-Tampering Policy we have not completed the testing\/CARB EO submission process.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/stmtuned.com\/collections\/cobb-products\" style=\"color: #afafaf;\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more COBB Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"COBB","offers":[{"title":"Default Title","offer_id":50562655158614,"sku":"COBB-860600","price":414.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/860600-cobb-can-gateway-module-r35-gtr-2018-1.jpg?v=1749203426"},{"product_id":"4wdhur-syvecs-huracan-r8-awd-controller","title":"Syvecs AWD Controller for 17+R8 \/ Huracan (SYV-4WDHUR)","description":"The Syvecs AWD module for Lamborghini Huracan and Audi R8 Gen2 is a standalone AWD center diff controller designed to control any AWD solenoid motor to a maximum of 30 amps via pin sharing logic.\u003cbr\u003e\u003cbr\u003eThe OEM designed controllers are locked down and not adjustable, but by fitting a Syvecs AWD Controller it allow users to optimize control and provide the best stability, acceleration performance and custom control.\u003cbr\u003e\u003cbr\u003eWith the use of the Syvecs Scal Software, users can connect to the Device and adjust over 40 maps to adjust the control of the solenoids and motors used in the AWD systems.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e\n2015-2024 Lamborghini Huracan (AWD)\u003cbr\u003e\n2017-2023 Audi R8 (AWD)\n\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eIncludes: \u003c\/span\u003e\u003cbr\u003e(1) Syvecs AWD Controller\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eShipping Time:\u003c\/span\u003e\u003cbr\u003eBuilt to order. Syvecs products generally ship in 2-4 weeks.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003eWe are sorry, discounts are not available with this product.\u003cbr\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/oK4-ZGELGNc\" height=\"563\" width=\"1000\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/hWg4GXuGWpA\" height=\"563\" width=\"1000\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore from Syvecs:\u003c\/span\u003e\u003cbr\u003e\u003cem\u003eIntroducing the new Huracan \/ R8 Gen2 Syvecs AWD module which is a standalone AWD\/4WD\/Centre Diff controller designed to control any AWD\/4WD Solenoid\/Motor to a maximum of 30 Amps via pin sharing logic.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eOEM designed controllers are locked down and not adjustable, but by simply fitting our AWD Module a whole new level of control is available. The unit allows users to optimise control and provide the best performance available from the powertrain.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eThe Huracan \/ R8 version of the controller replicates all the OEM CAN information as well as pick up lots of variable from the OEM Can to link into the control strategies like Steering Angle, Brake Pressure, Rpm, Tps, Lateral G, Yaw, Long G, Speeds, Temperatures and mode switches\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eLimp Protection options for large slip, high current, high temps which warn the driver but keep awd active unlike the OEM controllers which shut down the outputs which is not ideal with high horsepower!\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eWorks with any Engine Management System\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eThe Drive Mode Button on the Huracan \/ R8 is used for Map switching so allows users to be able to change between Awd Select 1, 2, 3 which means all the maps below can be adjusted. You can also enable the burnout mode to be active when Hazards are on or if handbrake is present.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eSyvecs also sells an optional loom to allow external Burnout switches to be mounted and Live adjustment potentiometers which gives drivers the ability to adjust the AWD Duty on the move or go 2wd from the flick of a switch.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eWith the use of our Scal Software, users can connect to the Device and adjust over 40 maps to adjust the control of the solenoids\/motors used in the AWD systems.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eSpecs:\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e• Maximum of 30 Amps via pin sharing (HBR1\u0026amp;2 or HBR3\u0026amp;4)\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• Onboard Current Monitoring of each output\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• 2x CanBus - Configurable Transmit Via Scal Program\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• 4x Analog inputs for assigning Burnout Switch, Adjustment Pot, Pressure sensor and Temp sensor\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• USB Connection - Dedicated Scal software with full calibration control\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• VCDS Support - Communicates with OEM Tools and Replicates OEM Haldex Ecu's\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• Mains Power control circuit based from Ignition Switch\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• Reverse Polarity Protection\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• Weatherproof Enclosure\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• 125c Temperature capable\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• 6v to 25v capable\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eSome of the Available Maps:\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e4x Base Duty Tables\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003e4x Adders with Enable Maps\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eLeft Foot Braking\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eFront Slip\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eRear Slip\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eCentre Slip\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003e4x Multipliers with Enable Maps\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eSteering Angle\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eAWD Temp\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eAWD Pressure\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eAWD Potentiometer\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eTyre Diameter adjustment under sensors\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003e2WD\/ Burnout Mode\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eVia Dedication Switched input\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eVia Can bus Message\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eVia OEM Functions\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eLimiters\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eMaximum Duty\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eLaunch Control Limit\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eDuty Rate of Change\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eDecay\/Hold Functions\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eLimp Mode\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eOver Current Protection\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eOver Slip Protection\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eOver Temp Protection\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eCooling Pump Control\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eAWD Cooling pump control logic\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eDatastream\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eThe Syvecs AWD Unit also has a dedicated Can bus transmit area where users can send variables from the AWD to external control units for monitoring or to OEM Canbus system via custom Identifiers and byte structuring\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eSensors \/ Switches\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eExternal sensors can be connected to the AWD module and then linearized in our Scal Software\u003c\/em\u003e\u003cbr\u003e\u003ca href=\"https:\/\/stmtuned.com\/collections\/syvecs-products\" style=\"color: #afafaf;\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more SYVECS Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"Syvecs","offers":[{"title":"Default Title","offer_id":50562678784342,"sku":"SYV-4WDHUR","price":1356.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/4wdhur-syvecs-huracan-r8-awd-controller-1.jpg?v=1749203634"},{"product_id":"pt0013b-injen-ford-throttle-controller","title":"Injen Throttle Controller for Raptor Focus Mustang (PT0013B)","description":"The Injen Technology X-Pedal Pro Black Edition Throttle Controller for Ford Focus RS\/ST, Raptor and EB Mustang allows you to tune out the delayed throttle response from the factory. You’ll be amazed how different your vehicle feels after this quick and simple install!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2016-2018 Ford Focus RS\u003cbr data-mce-fragment=\"1\"\u003e2013-2018 Ford Focus ST\u003cbr data-mce-fragment=\"1\"\u003e2015-2019 Ford Mustang EcoBoost\u003cbr data-mce-fragment=\"1\"\u003e2017-2022 Ford Raptor Twin Turbo\u003cbr\u003e (See more fitments below)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures \u0026amp; Specs:\u003c\/span\u003e\u003cbr\u003e• The sleek, black anodized aluminum housing provides an elegant aesthetic inside the cabin.\u003cbr\u003e• Quick and simple plug-and-play installation requires no cutting or splicing of any wires.\u003cbr\u003e• Provides increased throttle response for safer passing and an improved driving experience.\u003cbr\u003e• The X-Pedal Pro Black Edition is warranty friendly and will not leave a footprint after removal.\u003cbr\u003e• Works seamlessly with both Automatic and Manual transmissions.\u003cbr\u003e• Automatic Transmission equipped vehicles will notice a marked improvement in shifting performance.\u003cbr\u003e• The X-Pedal Pro Black Edition is compatible with most Aftermarket Programmers.\u003cbr\u003e• The built-in high-speed processor greatly improves throttle signal response time\u003cbr\u003e• Sport Mode: 9 levels, suitable for mountain roads and racing\u003cbr\u003e• ECO Mode: 7 levels, for driving in city areas which can improve fuel economy\u003cbr\u003e• Anti-skid function helps on lower friction surfaces with ease\u003cbr\u003e• Launch Control\/Drag Race Mode: Gets you to reach max acceleration faster\u003cbr\u003e• DAC (Digital to Analog Convert) - provides 1000 times\/sec processing speed\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eCalifornia Residents Note:\u003c\/span\u003e\u003cbr\u003eThis part is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore from Injen:\u003c\/span\u003e\u003cbr\u003e\u003cem\u003e\"The Injen Technology X-Pedal Pro Black Edition is the next step in customizable throttle response controllers. Quickly and easily tune out the delayed throttle response from the factory with Injen’s X-Pedal Pro Black Edition for a completely new driving experience. You’ll be amazed how different your vehicle feels after this quick and simple install!\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eModern vehicles are infamous for a sluggish and delayed throttle response feel directly from the factory. You’ll recognize this built-in delay when trying to accelerate to pass another vehicle or merging into traffic. Injen Technology’s X-Pedal Pro Black Edition allows you to adjust the pedal feel and ultimately the throttle response of your vehicle directly on the fly.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eThe X-Pedal Pro Black Edition is a plug-in module that requires less than 5 minutes to install. Our harness plugs directly into the OE connector behind the accelerator pedal to pull 5V power and manipulate the signals going to the ECU. The X-Pedal Pro Black Edition requires no splicing or cutting of any wires and does not interfere with other onboard systems, such as electronic injection, ABS brakes systems, etcetera.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eOnce installed, the X-Pedal Pro Black edition delivers immediate, customized performance for your vehicle. Specifically, the X-Pedal Pro Black Edition controls the throttle signals going into your stock ECU (Engine Control Unit) so that your vehicle instantly responds faster and accelerates swifter... or slower and more economically – depending on how you program the X-Pedal Pro Black Edition. With 9 levels of sport mode for crisp, on-demand throttle response and 7 levels of ECO mode for improved fuel efficiency, you’ll have an infinite amount of adjustability to match your specific driving style and performance needs.\"\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore Fitments:\u003c\/span\u003e\u003cbr\u003e2013-2019 Cadillac ATS L4-2.0L Turbo\u003cbr data-mce-fragment=\"1\"\u003e2016-2020 Chevrolet Camaro L4-2.0L Turbo\u003cbr data-mce-fragment=\"1\"\u003e2016-2020 Chevrolet Camaro SS V8-6.2L\u003cbr data-mce-fragment=\"1\"\u003e2019-2020 Chevrolet Silverado 1500 L4-2.7L Turbo\u003cbr data-mce-fragment=\"1\"\u003e2019-2020 Chevrolet Silverado 1500 V6-4.3L\u003cbr data-mce-fragment=\"1\"\u003e2019-2020 Chevrolet Silverado 1500 V8-5.3L\u003cbr data-mce-fragment=\"1\"\u003e2019-2020 Chevrolet Silverado 1500 V8-6.2L\u003cbr data-mce-fragment=\"1\"\u003e2012-2020 Chevrolet Sonic L4-1.4L Turbo\u003cbr data-mce-fragment=\"1\"\u003e2012-2018 Chevrolet Sonic L4-1.8L\u003cbr data-mce-fragment=\"1\"\u003e2011-2017 Chrysler 300 V6-3.6L\u003cbr data-mce-fragment=\"1\"\u003e2011-2019 Chrysler 300C V8-5.7L\u003cbr data-mce-fragment=\"1\"\u003e2012-2015 Chrysler 300 SRT8 V8-6.4L\u003cbr data-mce-fragment=\"1\"\u003e2011-2019 Dodge Challenger \/ Charger V6-3.6L\u003cbr data-mce-fragment=\"1\"\u003e2011-2019 Dodge Challenger \/ Charger V8-5.7L\u003cbr data-mce-fragment=\"1\"\u003e2015-2016 Dodge Challenger \/ Charger V8-6.2L Supercharged\u003cbr data-mce-fragment=\"1\"\u003e2011-2020 Dodge Challenger V8-6.4L\u003cbr data-mce-fragment=\"1\"\u003e2012-2020 Dodge Charger V8-6.4L\u003cbr data-mce-fragment=\"1\"\u003e2011-2020 Dodge Durango V6-3.6L\u003cbr data-mce-fragment=\"1\"\u003e2011-2017 Ford Explorer V6-3.5L\u003cbr data-mce-fragment=\"1\"\u003e2013-2019 Ford Explorer V6-3.5L Twin Turbo\u003cbr data-mce-fragment=\"1\"\u003e2015-2020 Ford F-150 V6-2.7L Twin Turbo\u003cbr data-mce-fragment=\"1\"\u003e2015-2020 Ford F-150 V6-3.5L Twin Turbo\u003cbr data-mce-fragment=\"1\"\u003e2015-2019 Ford F-150 V8-5.0L\u003cbr data-mce-fragment=\"1\"\u003e2017-2020 Ford F-150 Raptor V6-3.5L Twin Turbo\u003cbr data-mce-fragment=\"1\"\u003e2012-2014 Ford Focus L4-2.0L\u003cbr data-mce-fragment=\"1\"\u003e2016-2018 Ford Focus RS L4-2.3L Turbo\u003cbr data-mce-fragment=\"1\"\u003e2013-2018 Ford Focus ST L4-2.0L Turbo\u003cbr data-mce-fragment=\"1\"\u003e2013-2020 Ford Fusion L4-2.5L\u003cbr data-mce-fragment=\"1\"\u003e2013-2016 Ford Fusion L4-2.0L Turbo\u003cbr data-mce-fragment=\"1\"\u003e2015-2019 Ford Mustang L4-2.3L Turbo\u003cbr data-mce-fragment=\"1\"\u003e2015-2020 Ford Mustang GT V8-5.0L\u003cbr data-mce-fragment=\"1\"\u003e2012-2018 Jeep Wrangler JK V6-3.6L\u003cbr data-mce-fragment=\"1\"\u003e2011-2020 Jeep Grand Cherokee V6-3.6L\u003cbr data-mce-fragment=\"1\"\u003e2011-2013 Mazda 3 L4-2.0L\u003cbr data-mce-fragment=\"1\"\u003e2011-2013 Mazda 3 L4-2.5L\u003cbr data-mce-fragment=\"1\"\u003e2009-2013 Mazda 6 V6-3.7L\u003cbr data-mce-fragment=\"1\"\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":50562712830294,"sku":"INJ-PT0013B","price":244.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/PT0013B-injen-ford-throttle-controller-1.jpg?v=1749204082"},{"product_id":"pt0016b-injen-370z-g37-throttle-controller","title":"Injen Throttle Controller for 370Z\/G37 (PT0016B)","description":"The Injen Technology X-Pedal Pro Black Edition Throttle Controller for \u003cspan data-mce-fragment=\"1\"\u003eVQ37VHR \u003c\/span\u003e370Z and G37 allows you to tune out the delayed throttle response from the factory. You’ll be amazed how different your vehicle feels after this quick and simple install!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2009-2020 Nissan 370Z (includes NISMO)\u003cbr data-mce-fragment=\"1\"\u003e2007-2008 Infiniti G35 Sedan V6-3.5L\u003cbr data-mce-fragment=\"1\"\u003e2008-2013 Infiniti G37 Coupe V6-3.7L\u003cbr data-mce-fragment=\"1\"\u003e2008-2013 Infiniti G37 IPL Coupe V6-3.7L\u003cbr data-mce-fragment=\"1\"\u003e2009-2013 Infiniti G37 Sedan V6-3.7L\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures \u0026amp; Specs:\u003c\/span\u003e\u003cbr\u003e• The sleek, black anodized aluminum housing provides an elegant aesthetic inside the cabin.\u003cbr\u003e• Quick and simple plug-and-play installation requires no cutting or splicing of any wires.\u003cbr\u003e• Provides increased throttle response for safer passing and an improved driving experience.\u003cbr\u003e• The X-Pedal Pro Black Edition is warranty friendly and will not leave a footprint after removal.\u003cbr\u003e• Works seamlessly with both Automatic and Manual transmissions.\u003cbr\u003e• Automatic Transmission equipped vehicles will notice a marked improvement in shifting performance.\u003cbr\u003e• The X-Pedal Pro Black Edition is compatible with most Aftermarket Programmers.\u003cbr\u003e• The built-in high-speed processor greatly improves throttle signal response time\u003cbr\u003e• Sport Mode: 9 levels, suitable for mountain roads and racing\u003cbr\u003e• ECO Mode: 7 levels, for driving in city areas which can improve fuel economy\u003cbr\u003e• Anti-skid function helps on lower friction surfaces with ease\u003cbr\u003e• Launch Control\/Drag Race Mode: Gets you to reach max acceleration faster\u003cbr\u003e• DAC (Digital to Analog Convert) - provides 1000 times\/sec processing speed\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eCalifornia Residents Note:\u003c\/span\u003e\u003cbr\u003eThis part is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore from Injen:\u003c\/span\u003e\u003cbr\u003e\u003cem\u003e\"The Injen Technology X-Pedal Pro Black Edition is the next step in customizable throttle response controllers. Quickly and easily tune out the delayed throttle response from the factory with Injen’s X-Pedal Pro Black Edition for a completely new driving experience. You’ll be amazed how different your vehicle feels after this quick and simple install!\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eModern vehicles are infamous for a sluggish and delayed throttle response feel directly from the factory. You’ll recognize this built-in delay when trying to accelerate to pass another vehicle or merging into traffic. Injen Technology’s X-Pedal Pro Black Edition allows you to adjust the pedal feel and ultimately the throttle response of your vehicle directly on the fly.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eThe X-Pedal Pro Black Edition is a plug-in module that requires less than 5 minutes to install. Our harness plugs directly into the OE connector behind the accelerator pedal to pull 5V power and manipulate the signals going to the ECU. The X-Pedal Pro Black Edition requires no splicing or cutting of any wires and does not interfere with other onboard systems, such as electronic injection, ABS brakes systems, etcetera.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eOnce installed, the X-Pedal Pro Black edition delivers immediate, customized performance for your vehicle. Specifically, the X-Pedal Pro Black Edition controls the throttle signals going into your stock ECU (Engine Control Unit) so that your vehicle instantly responds faster and accelerates swifter... or slower and more economically – depending on how you program the X-Pedal Pro Black Edition. With 9 levels of sport mode for crisp, on-demand throttle response and 7 levels of ECO mode for improved fuel efficiency, you’ll have an infinite amount of adjustability to match your specific driving style and performance needs.\"\u003cbr\u003e\u003c\/em\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":50562713223510,"sku":"INJ-PT0016B","price":244.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/PT0016B-injen-370z-g37-throttle-controller-1.jpg?v=1749204087"},{"product_id":"pt0003b-injen-350z-g35-throttle-controller","title":"Injen Throttle Controller  for 350Z\/G35 (PT0003B)","description":"The Injen Technology X-Pedal Pro Black Edition Throttle Controller for VQ35DE 350Z and G35 allows you to tune out the delayed throttle response from the factory. You’ll be amazed how different your vehicle feels after this quick and simple install!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2003-2007 Infiniti G35 VQ35DE\u003cbr data-mce-fragment=\"1\"\u003e2003-2008 Nissan 350Z VQ35DE\u003cbr\u003e (See more fitments below)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures \u0026amp; Specs:\u003c\/span\u003e\u003cbr\u003e• The sleek, black anodized aluminum housing provides an elegant aesthetic inside the cabin.\u003cbr\u003e• Quick and simple plug-and-play installation requires no cutting or splicing of any wires.\u003cbr\u003e• Provides increased throttle response for safer passing and an improved driving experience.\u003cbr\u003e• The X-Pedal Pro Black Edition is warranty friendly and will not leave a footprint after removal.\u003cbr\u003e• Works seamlessly with both Automatic and Manual transmissions.\u003cbr\u003e• Automatic Transmission equipped vehicles will notice a marked improvement in shifting performance.\u003cbr\u003e• The X-Pedal Pro Black Edition is compatible with most Aftermarket Programmers.\u003cbr\u003e• The built-in high-speed processor greatly improves throttle signal response time\u003cbr\u003e• Sport Mode: 9 levels, suitable for mountain roads and racing\u003cbr\u003e• ECO Mode: 7 levels, for driving in city areas which can improve fuel economy\u003cbr\u003e• Anti-skid function helps on lower friction surfaces with ease\u003cbr\u003e• Launch Control\/Drag Race Mode: Gets you to reach max acceleration faster\u003cbr\u003e• DAC (Digital to Analog Convert) - provides 1000 times\/sec processing speed\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eCalifornia Residents Note:\u003c\/span\u003e\u003cbr\u003eThis part is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore from Injen:\u003c\/span\u003e\u003cbr\u003e\u003cem\u003e\"The Injen Technology X-Pedal Pro Black Edition is the next step in customizable throttle response controllers. Quickly and easily tune out the delayed throttle response from the factory with Injen’s X-Pedal Pro Black Edition for a completely new driving experience. You’ll be amazed how different your vehicle feels after this quick and simple install!\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eModern vehicles are infamous for a sluggish and delayed throttle response feel directly from the factory. You’ll recognize this built-in delay when trying to accelerate to pass another vehicle or merging into traffic. Injen Technology’s X-Pedal Pro Black Edition allows you to adjust the pedal feel and ultimately the throttle response of your vehicle directly on the fly.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eThe X-Pedal Pro Black Edition is a plug-in module that requires less than 5 minutes to install. Our harness plugs directly into the OE connector behind the accelerator pedal to pull 5V power and manipulate the signals going to the ECU. The X-Pedal Pro Black Edition requires no splicing or cutting of any wires and does not interfere with other onboard systems, such as electronic injection, ABS brakes systems, etcetera.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eOnce installed, the X-Pedal Pro Black edition delivers immediate, customized performance for your vehicle. Specifically, the X-Pedal Pro Black Edition controls the throttle signals going into your stock ECU (Engine Control Unit) so that your vehicle instantly responds faster and accelerates swifter... or slower and more economically – depending on how you program the X-Pedal Pro Black Edition. With 9 levels of sport mode for crisp, on-demand throttle response and 7 levels of ECO mode for improved fuel efficiency, you’ll have an infinite amount of adjustability to match your specific driving style and performance needs.\"\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore Fitments:\u003c\/span\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2003-2008 Nissan Murano V6-3.5L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2002-2006 Toyota Corolla L4-1.8L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2005-2006 Toyota Corolla XRS L4-1.8L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2002-2006 Toyota Solara L4-2.4L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2002-2006 Toyota Solara V6-3.0L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2002-2006 Toyota Solara V6-3.3L\u003c\/span\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":50562718204246,"sku":"INJ-PT0003B","price":244.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/PT0003B-injen-350z-g35-throttle-controller-1.jpg?v=1749204108"},{"product_id":"pt0002b-injen-subaru-lexus-throttle-controller","title":"Injen Throttle Controller for Subaru\/Lexus (PT0002B)","description":"The Injen Technology X-Pedal Pro Black Edition Throttle Controller for Subaru and Lexus models allows you to tune out the delayed throttle response from the factory. You’ll be amazed how different your vehicle feels after this quick and simple install!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2008-2017 Subaru STi\u003cbr\u003e 2008-2020 Subaru WRX\u003cbr\u003e 2013+ Subaru BRZ\u003cbr\u003e 2013+ Scion FRS\u003cbr\u003e 2017+ Toyota 86\u003cbr\u003e 2006-2013 Lexus IS250 V6 3.5L\u003cbr\u003e 2006-2013 Lexus IS350 V6 3.5L\u003cbr\u003e 2008-2012 Lexus IS-F V8 5.0L\u003cbr\u003e (See more fitments below)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures \u0026amp; Specs:\u003c\/span\u003e\u003cbr\u003e• The sleek, black anodized aluminum housing provides an elegant aesthetic inside the cabin.\u003cbr\u003e• Quick and simple plug-and-play installation requires no cutting or splicing of any wires.\u003cbr\u003e• Provides increased throttle response for safer passing and an improved driving experience.\u003cbr\u003e• The X-Pedal Pro Black Edition is warranty friendly and will not leave a footprint after removal.\u003cbr\u003e• Works seamlessly with both Automatic and Manual transmissions.\u003cbr\u003e• Automatic Transmission equipped vehicles will notice a marked improvement in shifting performance.\u003cbr\u003e• The X-Pedal Pro Black Edition is compatible with most Aftermarket Programmers.\u003cbr\u003e• The built-in high-speed processor greatly improves throttle signal response time\u003cbr\u003e• Sport Mode: 9 levels, suitable for mountain roads and racing\u003cbr\u003e• ECO Mode: 7 levels, for driving in city areas which can improve fuel economy\u003cbr\u003e• Anti-skid function helps on lower friction surfaces with ease\u003cbr\u003e• Launch Control\/Drag Race Mode: Gets you to reach max acceleration faster\u003cbr\u003e• DAC (Digital to Analog Convert) - provides 1000 times\/sec processing speed\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eCalifornia Residents Note:\u003c\/span\u003e\u003cbr\u003eThis part is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore from Injen:\u003c\/span\u003e\u003cbr\u003e\u003cem\u003e\"The Injen Technology X-Pedal Pro Black Edition is the next step in customizable throttle response controllers. Quickly and easily tune out the delayed throttle response from the factory with Injen’s X-Pedal Pro Black Edition for a completely new driving experience. You’ll be amazed how different your vehicle feels after this quick and simple install!\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eModern vehicles are infamous for a sluggish and delayed throttle response feel directly from the factory. You’ll recognize this built-in delay when trying to accelerate to pass another vehicle or merging into traffic. Injen Technology’s X-Pedal Pro Black Edition allows you to adjust the pedal feel and ultimately the throttle response of your vehicle directly on the fly.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eThe X-Pedal Pro Black Edition is a plug-in module that requires less than 5 minutes to install. Our harness plugs directly into the OE connector behind the accelerator pedal to pull 5V power and manipulate the signals going to the ECU. The X-Pedal Pro Black Edition requires no splicing or cutting of any wires and does not interfere with other onboard systems, such as electronic injection, ABS brakes systems, etcetera.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eOnce installed, the X-Pedal Pro Black edition delivers immediate, customized performance for your vehicle. Specifically, the X-Pedal Pro Black Edition controls the throttle signals going into your stock ECU (Engine Control Unit) so that your vehicle instantly responds faster and accelerates swifter... or slower and more economically – depending on how you program the X-Pedal Pro Black Edition. With 9 levels of sport mode for crisp, on-demand throttle response and 7 levels of ECO mode for improved fuel efficiency, you’ll have an infinite amount of adjustability to match your specific driving style and performance needs.\"\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore Fitments:\u003c\/span\u003e\u003cbr\u003e2011-2014 Mazda 2 L4-1.5L\u003cbr data-mce-fragment=\"1\"\u003e2012-2016 Subaru Impreza H4-2.0L\u003cbr data-mce-fragment=\"1\"\u003e2010-2015 Subaru Outback H4-2.5L\u003cbr data-mce-fragment=\"1\"\u003e2010-2019 Toyota 4Runner V6-4.0L\u003cbr data-mce-fragment=\"1\"\u003e2002-2011 Toyota Camry L4-2.4L\u003cbr data-mce-fragment=\"1\"\u003e2003-2005 Toyota Camry V6-3.3L\u003cbr data-mce-fragment=\"1\"\u003e2007-2011 Toyota Camry V6-3.5L\u003cbr data-mce-fragment=\"1\"\u003e2009-2013 Toyota Corolla L4-1.8L\u003cbr data-mce-fragment=\"1\"\u003e2009-2010 Toyota Corolla XRS L4-2.4L\u003cbr data-mce-fragment=\"1\"\u003e2005-2007 Toyota Matrix XR L4-1.8L\u003cbr data-mce-fragment=\"1\"\u003e2010-2013 Toyota Prius L4-1.8L\u003cbr data-mce-fragment=\"1\"\u003e2007-2020 Toyota Tundra V8-5.7L","brand":"Injen","offers":[{"title":"Default Title","offer_id":50562720792918,"sku":"INJ-PT0002B","price":244.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/PT0002B-injen-subaru-lexus-throttle-controller-1.jpg?v=1749204135"},{"product_id":"pt0008b-injen-mkv-supra-gr-throttle-controller","title":"Injen 2020+ Supra \/ F8X BMW Throttle Controller (PT0008B)","description":"The Injen Technology X-Pedal Pro Black Edition Throttle Controller for 2020+ Supra GR and F8X M2, M3 and M4 allows you to tune out the delayed throttle response from the factory. You’ll be amazed how different your vehicle feels after this quick and simple install! \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e 2020-2023 Toyota Supra GR (A90 MKV MK5)\u003cbr\u003e 2001-2006 BMW M3\u003cbr\u003e 2015-2018 BMW M3\u003cbr\u003e2015-2020 BMW M4\u003cbr\u003e2016-2021 BMW M2\u003cbr\u003e 1999-2020 BMW (See more fitments below)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures \u0026amp; Specs:\u003c\/span\u003e\u003cbr\u003e• The sleek, black anodized aluminum housing provides an elegant aesthetic inside the cabin.\u003cbr\u003e• Quick and simple plug-and-play installation requires no cutting or splicing of any wires.\u003cbr\u003e• Provides increased throttle response for safer passing and an improved driving experience.\u003cbr\u003e• The X-Pedal Pro Black Edition is warranty friendly and will not leave a footprint after removal.\u003cbr\u003e• Works seamlessly with both Automatic and Manual transmissions.\u003cbr\u003e• Automatic Transmission equipped vehicles will notice a marked improvement in shifting performance.\u003cbr\u003e• The X-Pedal Pro Black Edition is compatible with most Aftermarket Programmers.\u003cbr\u003e• The built-in high-speed processor greatly improves throttle signal response time\u003cbr\u003e• Sport Mode: 9 levels, suitable for mountain roads and racing\u003cbr\u003e• ECO Mode: 7 levels, for driving in city areas which can improve fuel economy\u003cbr\u003e• Anti-skid function helps on lower friction surfaces with ease\u003cbr\u003e• Launch Control\/Drag Race Mode: Gets you to reach max acceleration faster\u003cbr\u003e• DAC (Digital to Analog Convert) - provides 1000 times\/sec processing speed\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eCalifornia Residents Note:\u003c\/span\u003e\u003cbr\u003eThis part is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore from Injen:\u003c\/span\u003e\u003cbr\u003e\u003cem\u003e\"The Injen Technology X-Pedal Pro Black Edition is the next step in customizable throttle response controllers. Quickly and easily tune out the delayed throttle response from the factory with Injen’s X-Pedal Pro Black Edition for a completely new driving experience. You’ll be amazed how different your vehicle feels after this quick and simple install!\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eModern vehicles are infamous for a sluggish and delayed throttle response feel directly from the factory. You’ll recognize this built-in delay when trying to accelerate to pass another vehicle or merging into traffic. Injen Technology’s X-Pedal Pro Black Edition allows you to adjust the pedal feel and ultimately the throttle response of your vehicle directly on the fly.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eThe X-Pedal Pro Black Edition is a plug-in module that requires less than 5 minutes to install. Our harness plugs directly into the OE connector behind the accelerator pedal to pull 5V power and manipulate the signals going to the ECU. The X-Pedal Pro Black Edition requires no splicing or cutting of any wires and does not interfere with other onboard systems, such as electronic injection, ABS brakes systems, etcetera.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eOnce installed, the X-Pedal Pro Black edition delivers immediate, customized performance for your vehicle. Specifically, the X-Pedal Pro Black Edition controls the throttle signals going into your stock ECU (Engine Control Unit) so that your vehicle instantly responds faster and accelerates swifter... or slower and more economically – depending on how you program the X-Pedal Pro Black Edition. With 9 levels of sport mode for crisp, on-demand throttle response and 7 levels of ECO mode for improved fuel efficiency, you’ll have an infinite amount of adjustability to match your specific driving style and performance needs.\"\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore Fitments:\u003c\/span\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2008-2013 BMW 128i L6-3.0L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2008-2010 BMW 135i L6-3.0L Twin Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2011-2013 BMW 135i L6-3.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2014-2016 BMW 220i \/ 220i xDrive L4-2.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2014-2016 BMW 228i \/ 228i xDrive L4-2.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2017-2020 BMW 230i \/ 230i xDrive L4-2.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2013-2018 BMW 320i \/ 320i xDrive L4-2.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1999-2000 BMW 323i L6-2.5L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2001-2006 BMW 325i L6-2.5L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2006-2006 BMW 325xi L6-2.5L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1999-2000 BMW 328i L6-2.8L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2007-2013 BMW 328i L6-3.0L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2012-2016 BMW 328i \/ 328i xDrive L4-2.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2007-2008 BMW 328xi L6-3.0L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2009-2013 BMW 328i xDrive L6-3.0L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2001-2006 BMW 330i L6-3.0L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2006-2006 BMW 330xi L6-3.0L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2016-2018 BMW 330i \/ 330i xDrive L4-2.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2016-2018 BMW 330i GT L4-2.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2007-2010 BMW 335i L6-3.0L Twin Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2007-2008 BMW 335xi L6-3.0L Twin Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2009-2010 BMW 335i xDrive L6- 3.0L Twin Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2011-2016 BMW 335i \/ 335i xDrive L6-3.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2014-2016 BMW 335i GT \/ 335i GT xDrive L6-3.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2016-2019 BMW 340i \/ 340i xDrive L6-3.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2016-2019 BMW 340i GT \/ 340i GT xDrive L6-3.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2014-2016 BMW 420i \/ 420i xDrive L4-2.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2014-2016 BMW 428i 428i xDrive L4-2.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2017-2020 BMW 430i \/ 430i xDrive L4-2.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2017-2020 BMW 430i Gran Coupe \/ 430i Gran Coupe xDrive L4-2.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2014-2016 BMW 435i \/ 435i xDrive L6-3.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2014-2016 BMW 435i Gran Coupe \/ 435i Gran Croupe xDrive L6-3.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2016-2020 BMW 440i \/ 440i xDrive L6-3.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2017-2018 BMW 440i Gran Coupe \/ 440i Gran Coupe xDrive L6-3.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2001-2007 BMW 525i L6-2.5L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2007-2009 BMW 528i L6-3.0L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2012-2017 BMW 528i \/ 528i xDrive L4-2.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2001-2007 BMW 530i L6-3.0L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2008-2017 BMW 535i \/ 535i xDrive L6-3.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2001-2003 BMW 540i L6-3.0L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2004-2005 BMW 545i V8-4.4L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2006-2009 BMW 550i V8-4.8L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2009-2017 BMW 550i V8-4.4L Twin Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2013-2017 BMW 550i xDrive V8-4.4L Twin Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2013-2017 BMW 550i GT V8-4.4L Twin Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2011-2017 BMW 640i L6-3.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2013-2017 BMW 640i xDrive L6-3.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2004-2005 BMW 645i V8-4.4L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2006-2010 BMW 650i V8-4.4L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2011-2017 BMW 650i V8-4.4L Twin Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2013-2017 BMW 650i xDrive V8-4.4L Twin Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2011-2015 BMW 740i L6-3.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2002-2005 BMW 745i V8-4.4L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2006-2009 BMW 750i V8-4.8L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2009-2015 BMW 750i V8-4.4L Twin Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2003-2008 BMW 760i V12-6.0L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2010-2015 BMW 760i V12-6.0L Twin Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2016-2018 BMW M2 L6-3.0L Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2019-2020 BMW M2 Competition L6-3.0L Twin Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2001-2006 BMW M3 L6-3.2L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2015-2018 BMW M3 L6-3.0L Twin Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2015-2020 BMW M4 L6-3.0L Twin Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2006-2010 BMW M5 V10- 5.0L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2012-2017 BMW M5 V8-4.4L Twin Turbo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2006-2010 BMW M6 V10-5.0L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2012-2017 BMW M6 V8-4.4L Twin Turbo\u003c\/span\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":50562721448278,"sku":"INJ-PT0008B","price":244.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/PT0008B-injen-mkv-supra-gr-throttle-controller-1.jpg?v=1749204142"},{"product_id":"pt0006b-injen-evo-x-throttle-controller","title":"Injen X-Pedal Throttle Controller for Evo X (PT0006B)","description":"The Injen Technology X-Pedal Pro Black Edition Throttle Controller for Evo X allows you to tune out the delayed throttle response from the factory. You’ll be amazed how different your vehicle feels after this quick and simple install! Compatible with both GSR and MR models.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2008-2015 Evolution X\u003cbr\u003e2009-2012 Mitsubishi Lancer Ralliart\u003cbr\u003e2011-2013 Mitsubishi Outlander Sport\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures \u0026amp; Specs:\u003c\/span\u003e\u003cbr\u003e• The sleek, black anodized aluminum housing provides an elegant aesthetic inside the cabin.\u003cbr\u003e• Quick and simple plug-and-play installation requires no cutting or splicing of any wires.\u003cbr\u003e• Provides increased throttle response for safer passing and an improved driving experience.\u003cbr\u003e• The X-Pedal Pro Black Edition is warranty friendly and will not leave a footprint after removal.\u003cbr\u003e• Works seamlessly with both Automatic and Manual transmissions.\u003cbr\u003e• Automatic Transmission equipped vehicles will notice a marked improvement in shifting performance.\u003cbr\u003e• The X-Pedal Pro Black Edition is compatible with most Aftermarket Programmers.\u003cbr\u003e• The built-in high-speed processor greatly improves throttle signal response time\u003cbr\u003e• Sport Mode: 9 levels, suitable for mountain roads and racing\u003cbr\u003e• ECO Mode: 7 levels, for driving in city areas which can improve fuel economy\u003cbr\u003e• Anti-skid function helps on lower friction surfaces with ease\u003cbr\u003e• Launch Control\/Drag Race Mode: Gets you to reach max acceleration faster\u003cbr\u003e• DAC (Digital to Analog Convert) - provides 1000 times\/sec processing speed\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eCalifornia Residents Note:\u003c\/span\u003e\u003cbr\u003eThis part is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore from Injen:\u003c\/span\u003e\u003cbr\u003e\u003cem\u003e\"The Injen Technology X-Pedal Pro Black Edition is the next step in customizable throttle response controllers. Quickly and easily tune out the delayed throttle response from the factory with Injen’s X-Pedal Pro Black Edition for a completely new driving experience. You’ll be amazed how different your vehicle feels after this quick and simple install!\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eModern vehicles are infamous for a sluggish and delayed throttle response feel directly from the factory. You’ll recognize this built-in delay when trying to accelerate to pass another vehicle or merging into traffic. Injen Technology’s X-Pedal Pro Black Edition allows you to adjust the pedal feel and ultimately the throttle response of your vehicle directly on the fly.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eThe X-Pedal Pro Black Edition is a plug-in module that requires less than 5 minutes to install. Our harness plugs directly into the OE connector behind the accelerator pedal to pull 5V power and manipulate the signals going to the ECU. The X-Pedal Pro Black Edition requires no splicing or cutting of any wires and does not interfere with other onboard systems, such as electronic injection, ABS brakes systems, etcetera.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eOnce installed, the X-Pedal Pro Black edition delivers immediate, customized performance for your vehicle. Specifically, the X-Pedal Pro Black Edition controls the throttle signals going into your stock ECU (Engine Control Unit) so that your vehicle instantly responds faster and accelerates swifter... or slower and more economically – depending on how you program the X-Pedal Pro Black Edition. With 9 levels of sport mode for crisp, on-demand throttle response and 7 levels of ECO mode for improved fuel efficiency, you’ll have an infinite amount of adjustability to match your specific driving style and performance needs.\"\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/stmtuned.com\/collections\/injen-products\" style=\"color: #afafaf;\" target=\"blank\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more Injen Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":50562722857302,"sku":"INJ-PT0006B","price":258.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/PT0006B-injen-evo-x-throttle-controller-1.jpg?v=1749204180"},{"product_id":"ap3-sub-001-accessport-subaru-wrx-2002","title":"COBB Accessport V3 for 2002-2005 WRX (AP3-SUB-001)","description":"The COBB Tuning AP3-SUB-001 Accessport V3 for the 2002-2005 Subaru WRX models is the world's best selling, most flexible and easiest to use ECU upgrade solution. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Please note these are compatible with the US models only.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2002-2005 Subaru WRX USDM\u003cbr\u003e• \u003ca href=\"https:\/\/www.cobbtuning.com\/products\/software\/accessport-manager\" style=\"color: #afafaf; text-decoration: underline;\" target=\"blank\"\u003e Subaru Accessport Manager\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eRealtime Tuning:\u003c\/span\u003e\u003cbr\u003eChanges can be made to the map in realtime, while the engine is running. Greatly speeds up the tuning process and allows quick changes to powerful features like Launch Control, Flat Foot Shift, and map switching.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eLaunch Control:\u003c\/span\u003e\u003cbr\u003eSet RPM threshold for performance launching the car from a stop. Builds boost and generates instantaneous horsepower off the line.\u003cbr\u003e\u003cbr\u003e\u003ciframe src=\"\/\/player.vimeo.com\/video\/124653723\" height=\"563\" width=\"1000\" frameborder=\"0\" webkitallowfullscreen=\"\" mozallowfullscreen=\"\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore from COBB Tuning:\u003c\/span\u003e\u003cbr\u003eSimple ECU flashing with gauge package! The new in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up race, street, or dyno gauge clusters), and mounting options (choose from 1,000s of standard vehicle mounts). And what's looks without brains? More processing power, memory, and storage to flash faster while saving all of your maps and logs. This is your new Accessport.\u003cbr\u003e\u003cbr\u003eWarning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU\/TCU failure. Please contact COBB Support if you have any questions.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures:\u003c\/span\u003e\u003cbr\u003e• Larger, full color, higher resolution screen\u003cbr\u003e• Customizable multi-gauge display\u003cbr\u003e• In vehicle mount, with on\/off switch\u003cbr\u003e• Faster and easier to use with a familiar face\u003cbr\u003e• Interchangeable faceplates\u003cbr\u003e\u003cbr\u003eVisit \u003ca href=\"https:\/\/www.cobbtuning.com\/products\/accessport\" style=\"color: #afafaf; text-decoration: underline;\" target=\"blank\"\u003eCOBB Tuning\u003c\/a\u003e to review ALL features, updates and vehicle compatibility. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eCustomize your look!\u003c\/span\u003e\u003cbr\u003e\n\u003ca style=\"color: #afafaf; text-decoration: underline;\" target=\"blank\" href=\"https:\/\/stmtuned.com\/products\/cobb-accessport-v3-faceplates\"\u003e\nAccessport Faceplates (Sold separately)\u003cbr\u003e\n\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan style=\"color: #ff2a00;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003e We are sorry, discounts and codes are not available for COBB Products. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eCOBB Emissions Statement:\u003c\/span\u003e\u003cbr\u003e This part is legal for sale and use on Emissions Controlled Vehicles in all 50 states when used in accordance with the manufacturer’s application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number.\u003cbr\u003e\u003cbr\u003e \u003ca href=\"https:\/\/stmtuned.com\/collections\/cobb-products\" style=\"color: #afafaf;\" target=\"blank\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more COBB Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"COBB","offers":[{"title":"Default Title","offer_id":50562750546262,"sku":"COBB-AP3-SUB-001","price":723.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/AP3-SUB-001-accessport-subaru-wrx-2002-1.jpg?v=1749204361"},{"product_id":"ap3-sub-002-accessport-subaru-wrx-sti-2004","title":"COBB Accessport V3 for 06-07 WRX \/ 04-07 STi (AP3-SUB-002)","description":"The COBB Tuning AP3-SUB-002 Accessport V3 for the 2006-2007 Subaru WRX and 2004-2007 STi models is the world's best selling, most flexible and easiest to use ECU upgrade solution. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Please note these are compatible with the US models only.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2004-2007 Subaru STi USDM\u003cbr\u003e2006-2007 Subaru WRX USDM\u003cbr\u003e• \u003ca style=\"color: #afafaf; text-decoration: underline;\" href=\"https:\/\/www.cobbtuning.com\/products\/software\/accessport-manager\" target=\"blank\"\u003e Subaru Accessport Manager\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eRealtime Tuning:\u003c\/span\u003e\u003cbr\u003eChanges can be made to the map in realtime, while the engine is running. Greatly speeds up the tuning process and allows quick changes to powerful features like Launch Control, Flat Foot Shift, and map switching.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eLaunch Control:\u003c\/span\u003e\u003cbr\u003eSet RPM threshold for performance launching the car from a stop. Builds boost and generates instantaneous horsepower off the line.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFlat Foot Shifting:\u003c\/span\u003e\u003cbr\u003eKeep the throttle on the floor during shifts and maintain boost between gears with this customizable RPM setting.\u003cbr\u003e\u003cbr\u003e\u003ciframe width=\"1000\" height=\"563\" src=\"\/\/player.vimeo.com\/video\/124653723\" allowfullscreen=\"\" mozallowfullscreen=\"\" webkitallowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore from COBB Tuning:\u003c\/span\u003e\u003cbr\u003e\u003cem\u003eSimple ECU flashing with gauge package! The new in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up race, street, or dyno gauge clusters), and mounting options (choose from 1,000s of standard vehicle mounts). And what's looks without brains? More processing power, memory, and storage to flash faster while saving all of your maps and logs. This is your new Accessport.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eWarning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU\/TCU failure. Please contact COBB Support if you have any questions.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures:\u003c\/span\u003e\u003cbr\u003e• Larger, full color, higher resolution screen\u003cbr\u003e• Customizable multi-gauge display\u003cbr\u003e• In vehicle mount, with on\/off switch\u003cbr\u003e• Faster and easier to use with a familiar face\u003cbr\u003e• Interchangeable faceplates\u003cbr\u003e\u003cbr\u003eVisit \u003ca style=\"color: #afafaf; text-decoration: underline;\" href=\"https:\/\/www.cobbtuning.com\/products\/accessport\" target=\"blank\"\u003eCOBB Tuning\u003c\/a\u003e to review ALL features, updates and vehicle compatibility. \u003cbr\u003e\u003cbr\u003e\n\n\u003cspan style=\"color: #ff2a00;\"\u003eCustomize your look!\u003c\/span\u003e\u003cbr\u003e\n\u003ca style=\"color: #afafaf; text-decoration: underline;\" target=\"blank\" href=\"https:\/\/stmtuned.com\/products\/cobb-accessport-v3-faceplates\"\u003e\nAccessport Faceplates (Sold separately)\u003cbr\u003e\n\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan style=\"color: #ff2a00;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003e We are sorry, discounts and codes are not available for COBB Products. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eCOBB Emissions Statement:\u003c\/span\u003e\u003cbr\u003e This part is legal for sale and use on Emissions Controlled Vehicles in all 50 states when used in accordance with the manufacturer’s application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number.\u003cbr\u003e\u003cbr\u003e \u003ca style=\"color: #afafaf;\" href=\"https:\/\/stmtuned.com\/collections\/cobb-products\" target=\"blank\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more COBB Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"COBB","offers":[{"title":"Default Title","offer_id":50562751594838,"sku":"COBB-AP3-SUB-002","price":723.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/AP3-SUB-002-accessport-subaru-wrx-sti-2004-1.jpg?v=1749204364"},{"product_id":"ap3-sub-003-accessport-subaru-wrx-sti-2008-2014","title":"COBB Accessport V3 for 2008-2014 WRX\/STi (AP3-SUB-003)","description":"The COBB Tuning AP3-SUB-003 Accessport V3 for the 2008-2014 Subaru WRX and STi models is the world's best selling, most flexible and easiest to use ECU upgrade solution. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Please note these are compatible with the US models only.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2008-2014 Subaru STi USDM\u003cbr\u003e2008-2014 Subaru WRX USDM\u003cbr\u003e• \u003ca style=\"color: #afafaf; text-decoration: underline;\" href=\"https:\/\/www.cobbtuning.com\/products\/software\/accessport-manager\" target=\"blank\"\u003e Subaru Accessport Manager\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eRealtime Tuning:\u003c\/span\u003e\u003cbr\u003eChanges can be made to the map in realtime, while the engine is running. Greatly speeds up the tuning process and allows quick changes to powerful features like Launch Control, Flat Foot Shift, and map switching.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eLaunch Control:\u003c\/span\u003e\u003cbr\u003eSet RPM threshold for performance launching the car from a stop. Builds boost and generates instantaneous horsepower off the line.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFlat Foot Shifting:\u003c\/span\u003e\u003cbr\u003eKeep the throttle on the floor during shifts and maintain boost between gears with this customizable RPM setting.\u003cbr\u003e\u003cbr\u003e\u003ciframe width=\"1000\" height=\"563\" src=\"\/\/player.vimeo.com\/video\/124653723\" allowfullscreen=\"\" mozallowfullscreen=\"\" webkitallowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cem\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore from COBB Tuning:\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eSimple ECU flashing with gauge package! The new in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up race, street, or dyno gauge clusters), and mounting options (choose from 1,000s of standard vehicle mounts). And what's looks without brains? More processing power, memory, and storage to flash faster while saving all of your maps and logs. This is your new Accessport.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cspan style=\"color: #ff2a00;\"\u003eWarning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU\/TCU failure. Please contact COBB Support if you have any questions.\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures:\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• Larger, full color, higher resolution screen\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• Customizable multi-gauge display\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• In vehicle mount, with on\/off switch\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• Faster and easier to use with a familiar face\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• Interchangeable faceplates\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eVisit \u003ca style=\"color: #afafaf; text-decoration: underline;\" href=\"https:\/\/www.cobbtuning.com\/products\/accessport\" target=\"blank\"\u003eCOBB Tuning\u003c\/a\u003e to review ALL features, updates and vehicle compatibility.\u003c\/em\u003e \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eCustomize your look!\u003c\/span\u003e\u003cbr\u003e\n\u003ca style=\"color: #afafaf; text-decoration: underline;\" target=\"blank\" href=\"https:\/\/stmtuned.com\/products\/cobb-accessport-v3-faceplates\"\u003e\nAccessport Faceplates (Sold separately)\u003cbr\u003e\n\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan style=\"color: #ff2a00;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003e We are sorry, discounts and codes are not available for COBB Products. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eCOBB Emissions Statement:\u003c\/span\u003e\u003cbr\u003e This part is legal for sale and use on Emissions Controlled Vehicles in all 50 states when used in accordance with the manufacturer’s application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number.\u003cbr\u003e\u003cbr\u003e \u003ca style=\"color: #afafaf;\" href=\"https:\/\/stmtuned.com\/collections\/cobb-products\" target=\"blank\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more COBB Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"COBB","offers":[{"title":"Default Title","offer_id":50562751660374,"sku":"COBB-AP3-SUB-003","price":753.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/AP3-SUB-003-accessport-subaru-wrx-sti-2008-2014-1.jpg?v=1749204368"},{"product_id":"ecm-link-v3-evo-1-2-3","title":"ECMLink V3 for Evo 1\/2\/3","description":"ECMLink is a tuning and logging tool for the Evo 1\/2\/3. ECMLink provides enhanced logging functionality and all the tuning tools you need to run any number of different configurations from bone stock cars on a stock MAF to 11-second road course beasts on speed density to 8-second drag cars.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e1992-1995 Evolution I II III\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003eOrder Notes:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e• Select your injectors\/MAF or leave a note on your order.\u003cbr data-mce-fragment=\"1\"\u003e• GM MAF parts are currently unavailable, so we (at STM) are not offering them.\u003cbr data-mce-fragment=\"1\"\u003e• If you need socketing services, you will need to ship your ECU in to ECMLink.\u003cbr data-mce-fragment=\"1\"\u003e• The ECMLink team is working through COVID, but please give them time to calibrate and package your kit.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003ePurchase Includes:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e• ECMLink CD\u003cbr data-mce-fragment=\"1\"\u003e• USB Cable\u003cbr data-mce-fragment=\"1\"\u003e• ECU Chip\u003cbr data-mce-fragment=\"1\"\u003e• Additional Wiring\u003cbr data-mce-fragment=\"1\"\u003e• Optional ECU Socket Service (Ship your ECU to ECMLink)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003eECMLink V3 Lite Features:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Evo 1\/2\/3 ECMLink is more like the classic \"V3 Lite\" version. You can dial in your injectors, adjust fuel and timing tables, set your launch limit, run no-lift-to-shift, dial in your throttle position sensor, run anti-lag off the line or between shifts, and even run full time speed density plus a lot more!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSo it's still packed with features, including a greatly enhanced logging system. It's just lacking some of the \"extra\" features of the full package like customized output controls, 10,000 RPM limits, GM MAF integration, etc.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca style=\"color: #afafaf; text-decoration: underline;\" href=\"http:\/\/www.ecmtuning.com\/wiki\/prodcompare\" target=\"blank\"\u003e V3 Product Comparison\u003c\/a\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003eECU Jumper Mod:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003ePlease note that in addition to the typical socket work every EPROM ECU needs in order to use aftermarket code, the Evo 1\/2\/3 ECU will require an additional \u003ca href=\"http:\/\/www.ecmtuning.com\/wiki\/e3ecmlinkmod\" style=\"color: #afafaf; text-decoration: underline;\" target=\"blank\"\u003e Jumper Mod\u003c\/a\u003e.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003eOrder Selections:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe settings you select when placing your order are used to provide an initial configuration in your flash module when ECMLink prepares it for you. You can definitely change all these settings yourself at any time, including injector compensation and MAF type or switch to speed density, etc, etc.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003eSocket Services:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eFirst, check to see if your ECU needs to be socketed.\u003cbr data-mce-fragment=\"1\"\u003eIf you need to send the EPROM ECU to be socketed, then be sure to select the Socket EPROM ECU option.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRead more: \u003ca href=\"http:\/\/www.ecmtuning.com\/wiki\/socketid\" style=\"color: #afafaf; text-decoration: underline;\" target=\"blank\"\u003e ECMLink Socket Info\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eIf you need to have these services done, ship your ECU to:\u003cbr\u003e\u003cbr\u003eECMTuning, Inc.\u003cbr\u003e1519 W Patrick St A10\u003cbr\u003eFrederick, MD 21702\u003cbr\u003e(* Please put a piece of tape on the ECU with your name and contact info! *)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eSpeed Density (SD) Note:\u003c\/span\u003e\u003cbr\u003eIf you plan to run speed density instead of a mass airflow sensor, you'll need to select \"Stock MAF\" as your MAF Type and then simply configure the ECU yourself when you get it installed in your car.\u003cbr\u003e\u003cbr\u003eInstructions on configuring speed density can be found on the \u003ca href=\"http:\/\/www.ecmtuning.com\/wiki\/sdsetup\" style=\"color: #afafaf; text-decoration: underline;\" target=\"blank\"\u003e ECMLink Speed Density Setup Page\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003eTo keep the order form from getting any more complicated, we have chosen to leave speed density off the list because that selection requires even more information (which MAP sensor you have installed and on which ECU input, which varies depending on ECU, etc.).\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eECMLink (V3) System Requirements:\u003c\/span\u003e\u003cbr\u003eWindows 2000\/XP\/Vista: Our recommended configuration would be Windows XP with 256 meg of RAM. You're certainly not going to have any problems with that setup or anything better. ECMLink works fine with Vista and Windows 2000 as well. And, of course, more memory is always better. But the basic XP w\/ 256meg of RAM would work very well for you.\u003cbr\u003eRead More: \u003ca href=\"http:\/\/www.ecmtuning.com\/wiki\/v3sysrequirements\" style=\"color: #afafaf; text-decoration: underline;\" target=\"blank\"\u003e ECMLink (V3) System Requirements\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\n\n\u003cspan style=\"color: #ff2a00;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003e\nWe are sorry, discounts and codes are not available for ECMLink Products.\n\u003cbr\u003e\u003cbr\u003e\n\n\u003ca href=\"https:\/\/stmtuned.com\/collections\/ecm-tuning-products\" style=\"color: #afafaf;\" target=\"blank\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more ECM Tuning Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"ECMTuning Inc.","offers":[{"title":"Stock \/ Stock MAF \/ No Socketing Service","offer_id":50562752250198,"sku":"ECMLINK-EVO123-1","price":501.2,"currency_code":"USD","in_stock":true},{"title":"Stock \/ Stock MAF \/ Socket EPROM ECU (+$40)","offer_id":50562752282966,"sku":"ECMLINK-EVO123-2","price":541.2,"currency_code":"USD","in_stock":true},{"title":"Stock \/ Hacked 2G DSM \/ No Socketing Service","offer_id":50562752315734,"sku":"ECMLINK-EVO123-3","price":501.2,"currency_code":"USD","in_stock":true},{"title":"Stock \/ Hacked 2G DSM \/ Socket EPROM ECU (+$40)","offer_id":50562752348502,"sku":"ECMLINK-EVO123-4","price":541.2,"currency_code":"USD","in_stock":true},{"title":"Stock \/ Evo 8\/3G Eclipse Other (Leave in Notes) \/ No Socketing Service","offer_id":50562752381270,"sku":"ECMLINK-EVO123-5","price":501.2,"currency_code":"USD","in_stock":true},{"title":"Stock \/ Evo 8\/3G Eclipse Other (Leave in Notes) \/ Socket EPROM ECU (+$40)","offer_id":50562752414038,"sku":"ECMLINK-EVO123-6","price":541.2,"currency_code":"USD","in_stock":true},{"title":"Evo 8 \/ Stock MAF \/ No Socketing Service","offer_id":50562752446806,"sku":"ECMLINK-EVO123-7","price":501.2,"currency_code":"USD","in_stock":true},{"title":"Evo 8 \/ Stock MAF \/ Socket EPROM ECU (+$40)","offer_id":50562752479574,"sku":"ECMLINK-EVO123-8","price":541.2,"currency_code":"USD","in_stock":true},{"title":"Evo 8 \/ Hacked 2G DSM \/ No Socketing Service","offer_id":50562752512342,"sku":"ECMLINK-EVO123-9","price":501.2,"currency_code":"USD","in_stock":true},{"title":"Evo 8 \/ Hacked 2G DSM \/ Socket EPROM ECU (+$40)","offer_id":50562752545110,"sku":"ECMLINK-EVO123-10","price":541.2,"currency_code":"USD","in_stock":true},{"title":"Evo 8 \/ Evo 8\/3G Eclipse Other (Leave in Notes) \/ No Socketing Service","offer_id":50562752577878,"sku":"ECMLINK-EVO123-11","price":501.2,"currency_code":"USD","in_stock":true},{"title":"Evo 8 \/ Evo 8\/3G Eclipse Other (Leave in Notes) \/ Socket EPROM ECU (+$40)","offer_id":50562752610646,"sku":"ECMLINK-EVO123-12","price":541.2,"currency_code":"USD","in_stock":true},{"title":"Other (Leave in Notes) \/ Stock MAF \/ No Socketing Service","offer_id":50562752643414,"sku":"ECMLINK-EVO123-13","price":501.2,"currency_code":"USD","in_stock":true},{"title":"Other (Leave in Notes) \/ Stock MAF \/ Socket EPROM ECU (+$40)","offer_id":50562752676182,"sku":"ECMLINK-EVO123-14","price":541.2,"currency_code":"USD","in_stock":true},{"title":"Other (Leave in Notes) \/ Hacked 2G DSM \/ No Socketing Service","offer_id":50562752708950,"sku":"ECMLINK-EVO123-15","price":501.2,"currency_code":"USD","in_stock":true},{"title":"Other (Leave in Notes) \/ Hacked 2G DSM \/ Socket EPROM ECU (+$40)","offer_id":50562752741718,"sku":"ECMLINK-EVO123-16","price":541.2,"currency_code":"USD","in_stock":true},{"title":"Other (Leave in Notes) \/ Evo 8\/3G Eclipse Other (Leave in Notes) \/ No Socketing Service","offer_id":50562752774486,"sku":"ECMLINK-EVO123-17","price":501.2,"currency_code":"USD","in_stock":true},{"title":"Other (Leave in Notes) \/ Evo 8\/3G Eclipse Other (Leave in Notes) \/ Socket EPROM ECU (+$40)","offer_id":50562752807254,"sku":"ECMLINK-EVO123-18","price":541.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/ecmlink-evo-1-2-3-v3.jpg?v=1749204386"},{"product_id":"dsm-link-v3-2g","title":"ECMLink (DSM Link) V3 for 2G DSM (95-97)","description":"ECMLink, also known as DSM Link, is a tuning and logging tool for the 1995-1997 2G DSM. ECMLink provides enhanced logging functionality and all the tuning tools you need to run any number of different configurations from bone stock cars on a stock MAF to 11-second road course beasts on speed density to 8-second drag cars.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e1995-1997 Eclipse GST\/GSX\u003cbr data-mce-fragment=\"1\"\u003e1995-1997 Talon TSi\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eOrder Notes:\u003c\/span\u003e\u003cbr\u003e• Select your injectors\/MAF or leave a note on your order what you have.\u003cbr\u003e• GM MAF parts are currently unavailable, so we (at STM) are not offering them.\u003cbr\u003e• If you need socketing or conversion services, you will need to ship your ECU in to ECMLink.\u003cbr\u003e• The ECMLink team is working through COVID, but please give them time to calibrate and package your kit.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003ePurchase Includes:\u003c\/span\u003e\u003cbr\u003e• ECMLink CD\u003cbr\u003e• USB Cable\u003cbr\u003e• ECU Chip\u003cbr\u003e• Additional Wiring\u003cbr\u003e• Optional ECU Socketing\/Conversion (Ship your ECU to ECMLink)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eECMLink V3 Features:\u003c\/span\u003e\u003cbr\u003e• Drop in Flash\u003cbr\u003e• Direct Access\u003cbr\u003e• Enhanced Datalogging\u003cbr\u003e• Dual Bank Injectors\u003cbr\u003e• Full-time Speed Density\u003cbr\u003e• All-in-one datalogging, real-time tuning and reflashing package\u003cbr\u003e• Extended load and RPM\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eOrder Selections:\u003c\/span\u003e\u003cbr\u003eThe settings you select when placing your order are used to provide an initial configuration in your flash module when ECMLink prepares it for you. You can definitely change all these settings yourself at any time, including injector compensation and MAF type or switch to speed density, etc, etc.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eSocket \/ Conversion Services:\u003c\/span\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• \u003c\/span\u003eFirst, check to see if your ECU needs to be socketed.\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• \u003c\/span\u003eIf you need to send the EPROM ECU to be socketed, then be sure to select the Socket EPROM ECU option.\u003cbr\u003e• If you need to convert your non-EPROM (1990-1997) ECU to EPROM, then select the Non-EPROM Conversion option.\u003cbr\u003e• \u003cstrong\u003eThe 2G NON-EPROM Conversion option is currently unavailable\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRead more: \u003ca href=\"http:\/\/www.ecmtuning.com\/wiki\/socketid\" style=\"color: #afafaf; text-decoration: underline;\" target=\"blank\"\u003e ECMLink Socket Info\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eIf you need to have these services done, ship your ECU to:\u003cbr\u003e\u003cbr\u003eECMTuning, Inc.\u003cbr\u003e1519 W Patrick St A10\u003cbr\u003eFrederick, MD 21702\u003cbr\u003e(* Please put a piece of tape on the ECU with your name and contact info! *)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eSpeed Density (SD) Note:\u003c\/span\u003e\u003cbr\u003eIf you plan to run speed density instead of a mass airflow sensor, you'll need to select \"Stock MAF\" as your MAF Type and then simply configure the ECU yourself when you get it installed in your car.\u003cbr\u003e\u003cbr\u003eInstructions on configuring speed density can be found on the \u003ca href=\"http:\/\/www.ecmtuning.com\/wiki\/sdsetup\" style=\"color: #afafaf; text-decoration: underline;\" target=\"blank\"\u003e ECMLink Speed Density Setup Page\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003eTo keep the order form from getting any more complicated, we have chosen to leave speed density off the list because that selection requires even more information (which MAP sensor you have installed and on which ECU input, which varies depending on ECU, etc.).\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eECMLink (V3) System Requirements:\u003c\/span\u003e\u003cbr\u003eWindows 2000\/XP\/Vista: Our recommended configuration would be Windows XP with 256 meg of RAM. You're certainly not going to have any problems with that setup or anything better. ECMLink works fine with Vista and Windows 2000 as well. And, of course, more memory is always better. But the basic XP w\/ 256meg of RAM would work very well for you.\u003cbr\u003eRead More: \u003ca href=\"http:\/\/www.ecmtuning.com\/wiki\/v3sysrequirements\" style=\"color: #afafaf; text-decoration: underline;\" target=\"blank\"\u003e ECMLink (V3) System Requirements\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore from ECMLink:\u003c\/span\u003e\u003cbr\u003e\u003cem\u003eECMLink (V3) is an all-in-one datalogging, real-time tuning, and reflashing package for your 1990-1999 DSM. On this page you'll find a quick high-level summary of the major features in ECMLink. If you need more details, feel free to contact us and we'll try to answer everything we can. If you just want to browse through the screens, you can hit the screenshots page. We also have a number of application demo videos too.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNew Application Design:\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eECMLink is a huge departure from our original and very successful DSMLink package. Only a tiny portion of the old V2 application and EPROM code was used in ECMLink. It was quite literally a complete rewrite of everything to produce a better end-product. Part of that was a completely new laptop application. This was coded from ground up to produce a much more powerful, flexible, extensible, and easier to use application. Screenshots will follow in other sections, but the highlights include a multi-tab interface that allows the user to review multiple datalogs at the same time. Lining two datalogs up and then quickly switching back and forth between the two tabs is an awesome way to detect minor differences between the two that might other wise have been nearly impossible.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eThe design also allows the user to make adjustments to configuration settings and direct access tables without being physically connected to the car. If the user needs even more editing or viewing options, most table data can be directly copied and pasted between the ECMLink application and Excel.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNative USB Cables:\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eThe standard datalogging cables for both the 1G and 2G platforms are now native USB interfaces. These use our own in-house designs. They're rugged and designed with years of experience behind them. They're fully opto-isolated and neither requires power from the car. They should connect more easily than the V2 cables and should prove to be even more reliable.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003eDrop-In Flash:\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eThe 1G version of the V2 product included a memory board that not only added much needed additional RAM to the 1G platform but also provided a persistent storage solution. Changes made by the user to the configuration of the ECU were saved permanently in non-volatile RAM.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eECMLink V3 takes this a step further with an integrated, drop-in flash device for both 1G and 2G DSMs as well as EVO1-3 ECUs. This device not only provides persistent storage of user configuration changes to the ECU, but it also provides direct reflash access to all the factory code \u0026amp; table areas as well!!\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eThis is one of the more innovative solutions I've ever seen. I'm biased, of course, but seriously, I've never seen anything this compact and easy to use for any other platform out there. It's literally the size of a standard EPROM chip, but includes SOOOO MUCH more functionality.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003eDirect Access:\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cem\u003eThe term “direct access” in ECMLink refers to the ability to directly manipulate table data anywhere in “code space”. This includes tweaking all the fuel and timing tables as well as various airflow tables and even how the ECU selects which fuel trim value to update!\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eBasically just about anything that controls ECU operation can be adjusted to meet the needs of the user's specific setup. The following picture shows one such table. This particular table is the primary ignition advance table. The values in this table are actually pulled from a stock 2003 EVO8.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eSharing complete timing and fuel data between platforms has never been so easy. Other sample files you can try out are listed on our \u003ca style=\"color: #afafaf; text-decoration: underline;\" href=\"http:\/\/www.ecmtuning.com\/wiki\/v3configs\" target=\"blank\"\u003e V3 Configurations\u003c\/a\u003e page.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003eExtended Load and RPM:\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cem\u003eThe previous screen shot of the direct access table actually illustrates another new V3 feature. The load and RPM indices into that table have been extended substantially over the factory defined limits. You can adjust out to 10,000 RPM and up to a load factor of 3.4. Load factor is a number you'll need to learn over time from your datalogs. But this is easily enough to cover adjustments from idle and light cruise all the way to nearly 40psi. Above the upper limits, the values defined at those limits are simply used.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003eEnhanced Datalogging:\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cem\u003eV3 includes even FASTER datalogging rates than were available in V2. The datalog viewer, of course, is also significantly enhanced. The screen shot below shows a capture of over 1000 samples per second!\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003eGM MAF Integration:\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003e** NOTE - GM MAF CABLES ARE CURRENTLY UNAVAILABLE TO PURCHASE NEW **\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eYou no longer need a GM MAF translator to run a GM MAF with a DSM ECU. We have included our own translation function inside the ECU itself. You simply select which GM MAF you have on your car, connect our cable between the GM MAF and the car's MAF harness and you're set. Our cable also includes break out connections for the unused intake air temp and baro pressure inputs on the factory connector. You can use these to easily connect up your own sensors in their place.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eNOTE 1: I absolutely must make mention of the fact that GM MAF outputs WILL vary from car to car. Most variations should be minor and easily corrected. However, it's not at ALL unusual to see a GM MAF installation require up to 30 or 40% adjustment from our base configuration! It's simply the way the GM MAF works. If you vary the size of the piping around the GM MAF, its output is going to vary accordingly. Our test platform used a 2.5“ IC pipe with flared ends to 3” just before\/after the GM MAF install point which was about 6 to 8 linear inches from the throttle body. If your setup varies from this, you can probably expect variations in GM MAF output from the base values we provide in ECMLink. There's a MAF adjustment function provided in the ECMLink application to help with this.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eNOTE 2: Using a GM MAF in the upper IC of a turbo charged car is inconsistent with the design of the GM MAF *and* it's inconsistent with MANY assumptions inside the DSM ECU. Factory DSM ECU code assumes the MAF is locate way out in front of the turbo and it assumes a LOT about the characteristics of the factory Mitsubishi MAF (response times, smoothing factors, etc.). You can still use a GM MAF and you can locate it in the upper IC. It works fine and has for years. Just please be aware of the limitation and expectations. ECMLink does provide a number of direct access adjustments to many of the tables that drive the ECU's assumption about MAF behavior. So you can tweak much of this difference out.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003eFull-Time Speed Density:\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cem\u003eRunning full-time speed density mode is one of the many cool new V3 features. You basically run the car off an airflow estimation from manifold pressure (boost) instead of a mass air sensor. It's hard to go into detail on speed density operation in a small summary paragraph. So we'll leave the details to the following pages.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003e• \u003ca style=\"color: #afafaf; text-decoration: underline;\" href=\"http:\/\/www.ecmtuning.com\/wiki\/sd101\" target=\"blank\"\u003e Basic, high-level SD operation details\u003c\/a\u003e\u003cbr\u003e • \u003ca style=\"color: #afafaf; text-decoration: underline;\" href=\"http:\/\/www.ecmtuning.com\/wiki\/sdsetup\" target=\"blank\"\u003e Details on setting up ECMLink for SD operation\u003c\/a\u003e\u003cbr\u003e • \u003ca style=\"color: #afafaf; text-decoration: underline;\" href=\"http:\/\/www.ecmtuning.com\/wiki\/sdveadjsdratio\" target=\"blank\"\u003e Dial in the VE table while running off a mass airflow sensor\u003c\/a\u003e\u003cbr\u003e • \u003ca style=\"color: #afafaf; text-decoration: underline;\" href=\"http:\/\/www.ecmtuning.com\/wiki\/sdveadjcomft\" target=\"blank\"\u003e Dial in the closed-loop parts of the VE table while running SD (uses fuel trim data)\u003c\/a\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003eDual-Bank Injectors:\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cem\u003eIf you've wanted to run more than 4 injectors, here you go. You basically configure a set of conditions to trigger the mode and then configure how fuel should be adjusted when the mode is active. You can even dial in a delay between when the mode is technically triggered and when the adjustments actually go active. This can help with installations that use a mechanical relay, for example, to activate the secondary injector bank inputs to their injector driver box.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003eAdditional Features:\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cem\u003eThere are numerous other new firmware features, including:\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003e• Idle-air clamp to reduce the effect of abnormally-high airflow readings at throttle-lift (vented BOV or stalling coming to a stop when you press the clutch pedal in)\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• Narrowband O2 simulation from a wideband O2 input signal (only one ECU input is required for both WB logging and normal closed-loop NB operation)\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• Additional MAF-compensation frequency points\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• Extended VE table for Fake MAF operation\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• Integrated EVO-8 base MAF support\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• Full windowed-parameter sets for output activation (Example shot)\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• Secondary maps are complete copies of your fuel and timing maps that you can switch between at any time.\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e• Increased flexibility on the choice of ECU analog input for an aftermarket sensor (e.g. the MAP sensor is no longer limited to the MDP or EGR Temp sensor input when used with the Fake MAF)\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eIn addition to having a multi-tab interface, the PC application has many other new features, some of which are mentioned here. Measurement units are selectable, so it's easy to switch between Imperial and Metric units, as well as absolute and gauge pressure, and lambda and air\/fuel ratio. Each displayed item has an individually-adjustable display range, allowing the graph to be scaled to display the details of interest. Auto-scan, auto-connection and connection polling allows rapid connection to the ECU, making initial installation a simple task.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003eFuture Features:\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cem\u003eThe V3 flash device is also firmware upgradeable! So as we add new features (there are several planned already), you can simply download the upgrade off our website and reprogram your device yourself. Just submit a firmware request file to us that includes all your current custom settings and we'll produce a firmware upgrade specifically for your device in your car!\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003e\nWe are sorry, discounts and codes are not available for ECMLink Products.\n\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/stmtuned.com\/collections\/ecm-tuning-products\" style=\"color: #afafaf;\" target=\"blank\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more ECM Tuning Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"ECMTuning Inc.","offers":[{"title":"Stock 450 \/ 2G Stock \/ No Socketing Service","offer_id":50562755002710,"sku":"ECMLINK-2GDSM-1","price":621.2,"currency_code":"USD","in_stock":true},{"title":"Stock 450 \/ 2G Stock \/ Socket EPROM ECU (+$40)","offer_id":50562755035478,"sku":"ECMLINK-2GDSM-2","price":668.04,"currency_code":"USD","in_stock":true},{"title":"Stock 450 \/ Other (Leave in Notes) \/ No Socketing Service","offer_id":50562755068246,"sku":"ECMLINK-2GDSM-3","price":621.2,"currency_code":"USD","in_stock":true},{"title":"Stock 450 \/ Other (Leave in Notes) \/ Socket EPROM ECU (+$40)","offer_id":50562755101014,"sku":"ECMLINK-2GDSM-4","price":661.2,"currency_code":"USD","in_stock":true},{"title":"Other (Leave in Notes) \/ 2G Stock \/ No Socketing Service","offer_id":50562755133782,"sku":"ECMLINK-2GDSM-5","price":621.2,"currency_code":"USD","in_stock":true},{"title":"Other (Leave in Notes) \/ 2G Stock \/ Socket EPROM ECU (+$40)","offer_id":50562755166550,"sku":"ECMLINK-2GDSM-6","price":661.2,"currency_code":"USD","in_stock":true},{"title":"Other (Leave in Notes) \/ Other (Leave in Notes) \/ No Socketing Service","offer_id":50562755199318,"sku":"ECMLINK-2GDSM-7","price":621.2,"currency_code":"USD","in_stock":true},{"title":"Other (Leave in Notes) \/ Other (Leave in Notes) \/ Socket EPROM ECU (+$40)","offer_id":50562755232086,"sku":"ECMLINK-2GDSM-8","price":661.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/ecmlink-2g-dsm-v3.jpg?v=1749204383"},{"product_id":"30-2225-aemnet-4-port-can-hub","title":"AEMnet 4 Port CAN Hub (30-2225)","description":"AEM 4 Port AEMnet CAN Hub is the perfect solution for connecting multiple AEMnet CAN bus-enabled devices together. This convenient Module provides a central docking station for four AEMnet cables via 4-way DTM-style housings and can provide power to all of the connected devices on the Hub through a single port (3A max current capacity – NOT for use to power UEGO sensor heaters). Users can daisy-chain two 4 Port AEMnet CAN Hubs together for a total of 6 connected devices.\u003cbr\u003e\u003cbr\u003e\u003ciframe width=\"1000\" height=\"563\" src=\"https:\/\/www.youtube.com\/embed\/0pmM5cvdvtY\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003eAEMnet buses must be properly terminated using termination resistors on each end of the port (120 Ohms each, see Specs tab for AEM Devices with termination resistors). AEM offers DTM-style 4-pin termination plugs that simplify this process if you have a device that does not have an integrated or selectable termination resistor.\u003cbr\u003e\u003cbr\u003eThe 4 Port CAN hub is IP67-rated and can be installed in the engine compartment. Mounting hardware and instructions are included.\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eEasily connect and power multiple AEMnet CAN devices from a central docking station!\u003c\/li\u003e\n\u003cli\u003eFour integrated 4-way DTM-style housings provide reliable AEMnet CAN connections\u003c\/li\u003e\n\u003cli\u003eDaisy chain two Hubs to connect six AEMnet Devices\u003c\/li\u003e\n\u003cli\u003eCompact enclosure - 3.45” (87.63mm) Long x 1.18” (29.85mm) Tall\u003c\/li\u003e\n\u003cli\u003eSafe for engine bay mounting – IP67-rated enclosure\u003c\/li\u003e\n\u003cli\u003eMounting hardware included (two 4-40 x 7\/8” flat head screws, two 4-40 x 0.375” washers and two 4-4 x 9\/64” Nylock nuts)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePOWERING DEVICES THROUGH THE 4 PORT AEMNET CAN HUB:\u003c\/strong\u003e\u003cbr\u003eAll 4 Port AEMnet Hub ports have the same pinout, so power and ground is only necessary on one port when powering devices through the Hub. IMPORTANT: The Hub has a max current capacity of 3A (do NOT attempt to distribute UEGO sensor heater power through the Hub).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePROPER BUS TERMINATION:\u003c\/strong\u003e\u003cbr\u003eAEMnet buses must be properly terminated for proper operation. The termination resistors are 120 Ohms each and must be located at the physical ends of the bus wires (two total). Please refer below for Termination Resistor availability by AEMnet-enabled device:\u003cbr\u003e\u003cbr\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr bgcolor=\"2d2d2d\"\u003e\n\u003ctd style=\"color: #ffffff;\"\u003eAEMnet Device:\u003c\/td\u003e\n\u003ctd style=\"color: #ffffff;\"\u003eConfiguration:\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd style=\"color: #ffffff;\"\u003e30-71XX Infinity ECU\u003c\/td\u003e\n\u003ctd style=\"color: #ffffff;\"\u003eHardware enabled by default on CAN A (AEMnet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"2d2d2d\"\u003e\n\u003ctd style=\"color: #ffffff;\"\u003eSeries 2 EMS\u003c\/td\u003e\n\u003ctd style=\"color: #ffffff;\"\u003eHardware enabled by default (AEMnet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd style=\"color: #ffffff;\"\u003e30-56XX and 30-57XX CD Carbon Digital Dash Displays\u003c\/td\u003e\n\u003ctd style=\"color: #ffffff;\"\u003eSoftware selectable, enabled by default\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"2d2d2d\"\u003e\n\u003ctd style=\"color: #ffffff;\"\u003e30-25XX AQ-1 Data Loggers\u003c\/td\u003e\n\u003ctd style=\"color: #ffffff;\"\u003eIncluded, non configurable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd style=\"color: #ffffff;\"\u003e30-2226 6 Channel CAN Sensor Module\u003c\/td\u003e\n\u003ctd style=\"color: #ffffff;\"\u003eNo resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"2d2d2d\"\u003e\n\u003ctd style=\"color: #ffffff;\"\u003e30-2224 22 Channel CAN Sensor Module\u003c\/td\u003e\n\u003ctd style=\"color: #ffffff;\"\u003eJumper Selectable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd style=\"color: #ffffff;\"\u003e30-2224 8 Channel K-Type EGT CAN Module\u003c\/td\u003e\n\u003ctd style=\"color: #ffffff;\"\u003eNo resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"2d2d2d\"\u003e\n\u003ctd style=\"color: #ffffff;\"\u003e30-03XX X-Series Gauges\u003c\/td\u003e\n\u003ctd style=\"color: #ffffff;\"\u003eNo resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd style=\"color: #ffffff;\"\u003e30-49XX Wideband Failsafe Gauges\u003c\/td\u003e\n\u003ctd style=\"color: #ffffff;\"\u003eNo resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cbr\u003eTermination resistors are available to simplify bus termination if your devices do not have a resistor:\u003cbr\u003e\u003cbr\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr bgcolor=\"2d2d2d\"\u003e\n\u003ctd style=\"color: #ffffff;\"\u003eDTM 4-pin Termination Resistor PN:\u003c\/td\u003e\n\u003ctd style=\"color: #ffffff;\"\u003eDescription:\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd style=\"color: #ffffff;\"\u003e35-3440-F\u003c\/td\u003e\n\u003ctd style=\"color: #ffffff;\"\u003eAEMnet Termination Plug, Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"2d2d2d\"\u003e\n\u003ctd style=\"color: #ffffff;\"\u003e35-3440-M\u003c\/td\u003e\n\u003ctd style=\"color: #ffffff;\"\u003eAEMnet Termination Plug, Male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003e We are sorry, discount codes are not available for AEM products.\u003cbr\u003e\u003cbr\u003e \u003ca href=\"https:\/\/stmtuned.com\/collections\/aem-products\" style=\"color: #afafaf;\" target=\"blank\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more AEM Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":50562837446998,"sku":"AEM-30-2225","price":79.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/30-2225-aemnet-4-port-can-hub-1.jpg?v=1749205405"},{"product_id":"aemnet-can-bus-extension-cables","title":"AEMnet CAN bus Extension Cable","description":"\u003cp\u003eAEM offers three sizes of AEMnet extension cables, which provide AEMnet-equipped product users with the extra length necessary to make a trouble-free connection when the supplied AEMnet cable will not reach.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 255, 0);\"\u003e\u003cstrong\u003eAEM has discontinued these. We do have some of the 2-foot ones left in stock. If the ADD TO CART button is available we still have stock! Unfortunately we are out of stock on the 5 foot and 10 foot variants. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eIncludes:\u003c\/span\u003e\u003cbr\u003e(1) Cable\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style=\"width: 100%; height: 78.3752px;\"\u003e\n\u003ctbody\u003e\n\u003ctr bgcolor=\"2d2d2d\" style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"color: rgb(255, 255, 255); width: 35.2905%; height: 19.5938px;\"\u003ePart Number:\u003c\/td\u003e\n\u003ctd style=\"color: rgb(255, 255, 255); width: 63.5645%; height: 19.5938px;\"\u003eDescription:\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\" style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"color: rgb(255, 255, 255); width: 35.2905%; height: 19.5938px;\"\u003e30-3606\u003c\/td\u003e\n\u003ctd style=\"color: rgb(255, 255, 255); width: 63.5645%; height: 19.5938px;\"\u003e2 Foot Extension Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"2d2d2d\" style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"color: rgb(255, 255, 255); width: 35.2905%; height: 19.5938px;\"\u003e30-3607\u003c\/td\u003e\n\u003ctd style=\"color: rgb(255, 255, 255); width: 63.5645%; height: 19.5938px;\"\u003e5 Foot Extension Cable \u003cspan style=\"color: rgb(255, 255, 0);\"\u003e*discontinued*\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\" style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"color: rgb(255, 255, 255); width: 35.2905%; height: 19.5938px;\"\u003e30-3608\u003c\/td\u003e\n\u003ctd style=\"color: rgb(255, 255, 255); width: 63.5645%; height: 19.5938px;\"\u003e10 Foot Extension Cable \u003cspan style=\"color: rgb(255, 255, 0);\"\u003e*discontinued*\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eThe following devices are equipped with AEMnet CAN bus communications. These cables allow you to mount them virtually anywhere on your vehicle and still have enough room to connect them to an Infinity ECU, Series 2 EMS, AQ-1 Data logger or X-Series Gauge.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInfinity ECU\u003c\/li\u003e\n\u003cli\u003eSeries 2 EMS\u003c\/li\u003e\n\u003cli\u003eEMS-4\u003c\/li\u003e\n\u003cli\u003eAQ-1 Data Loggers\u003c\/li\u003e\n\u003cli\u003eX-Series Pressure, Temp, AEMnet \u0026amp; GPS Speedo Gauges\u003c\/li\u003e\n\u003cli\u003eWideband Failsafe Gauges including Flex Fuel\u003c\/li\u003e\n\u003cli\u003e4-Channel Wideband UEGO AFR Controller\u003c\/li\u003e\n\u003cli\u003eVehicle Dynamics Module (VDM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003eWe are sorry, discount codes are not available for AEM products.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ca style=\"color: #afafaf;\" href=\"https:\/\/stmtuned.com\/collections\/aem-products\" target=\"blank\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more AEM Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"AEM","offers":[{"title":"2 Foot (30-3606)","offer_id":50562837512534,"sku":"AEM-30-3606","price":40.79,"currency_code":"USD","in_stock":true},{"title":"5 Foot (30-3607) *Discontinued*","offer_id":50562837545302,"sku":"AEM-30-3607","price":52.2,"currency_code":"USD","in_stock":true},{"title":"10 Foot (30-3608) *Discontinued*","offer_id":50562837578070,"sku":"AEM-30-3608","price":66.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/30-3606-aemnet-extension-cable-2-foot.jpg?v=1749205402"},{"product_id":"30-2224-aem-cd-8-channel-egt-can-module","title":"AEM 8-Channel K-Type Thermocouple EGT CAN Module (30-2224)","description":"AEM 8-Channel K-Type Thermocouple EGT CAN Module allows racers to install eight K-type thermocouple sensors onto their vehicle and receive data from the sensors via a one-plug CAN bus connection. It connects out of the box to AEM’s CD-5\/CD-7 Digital Dashes and it can be configured to send data to virtually any CAN-based receiving device that has programmable CAN bus capability!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eRecommended Sensors:\u003c\/span\u003e\u003cbr\u003e\u003ca style=\"color: #afafaf; text-decoration: underline;\" href=\"https:\/\/stmtuned.com\/products\/30-2068-aem-k-type-closed-tip-thermocouple\" target=\"blank\"\u003e 30-2068 K-Type Closed Tip Thermocouple\u003c\/a\u003e (Sold Separately)\u003cbr\u003e\u003cbr\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/ix55f5B_1DE\" height=\"563\" width=\"1000\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVIEW AND LOG UP TO 16 CRITICAL ENGINE TEMPERATURES\u003c\/strong\u003e\u003cbr\u003eThe 8-Channel K-Type EGT CAN Module includes eight K-type thermocouple inputs that use miniature K-type connectors. It accepts up to eight K-type thermocouple sensors which can be used for viewing and logging various temperatures including exhaust gas temps (EGTs), cylinder head temps, pre and post intercooler temps, air temps, water temps, fluid temps, disc brake temps and more. The 8-Channel K-Type EGT CAN Module can be daisy chained to a second module allowing users to receive up to 16 temperature channels through the same CAN bus connection!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHIGHLY ACCURATE AND INTELLIGENT\u003c\/strong\u003e\u003cbr\u003eThe 8-Channel K-Type EGT CAN Module uses an integrated cold junction sensor to ensure lab-grade temperature readings across all eight channels. It has the ability to read better than 1% full scale, even at the extremes of the temperature range (-200 to 1372°C\/-328 to 2501°F). The Module also includes open circuit\/fault detection to notify you if a sensor loses its connection and\/or needs to be replaced.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWORKS WITH NON-AEM DEVICES WITH CONFIGURABLE CAN BUS!\u003c\/strong\u003e\u003cbr\u003eThe Module utilizes flexible CAN configuration jumpers which allow it to be used with just about any 3rd party devices that have a configurable CAN bus. Selectable parameters include CAN bus speeds (250k, 500k, 1M), selectable header length (11- or 29-bit) and selectable base address, which allows two units to be daisy-chained together on the same bus.\u003cbr\u003e\u003cbr\u003ePower is supplied from the 4-pin DTM connector when paired with a CD-5 Carbon or CD-7 Digital Dash, but may require wiring to a power source on 3rd party devices that do not provide power from the connected CAN device. AEM provides 4-way DTM-style connectors to simplify the connection to non-AEM devices (DTM-Style 4-Way Connector Kit PN 35-2626, sold separately). AEMnet CAN bus extension cables are available separately in 2, 5- and 10-foot lengths.\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes 8 K-type thermocouple inputs to accept common K-type thermocouple sensors (sensors sold separately)\u003c\/li\u003e\n\u003cli\u003eUses common miniature thermocouple sockets\u003c\/li\u003e\n\u003cli\u003eDaisy-chain two modules together for up to 16 temp inputs through a single plug!\u003c\/li\u003e\n\u003cli\u003eOutputs all channels via configurable CAN bus via one-plug connection (DTM-style Connection Cables sold separately in various lengths)\u003c\/li\u003e\n\u003cli\u003ePre-configured AEMnet CAN bus for plug \u0026amp; play connection to CD Digital Dashes (not compatible with Infinity, Series 2 or AQ-1 at this time)\u003c\/li\u003e\n\u003cli\u003eCold junction compensated for lab-grade accuracy (+\/- 0.15% full scale)\u003c\/li\u003e\n\u003cli\u003eMeasures temperatures from -200 to 1372°C (-328 to 2501°F)\u003c\/li\u003e\n\u003cli\u003eTemperature resolution 0.1°C (32.18°F)\u003c\/li\u003e\n\u003cli\u003eIntegrated open circuit\/fault detection\u003c\/li\u003e\n\u003cli\u003eIncludes 8-Channel K-Type EGT CAN Module, 4-Pin DTM-style Connector Plug, instructions and Velcro for in-vehicle mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan style=\"color: #ff2a00;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003e We are sorry, discount codes are not available for AEM products.\u003cbr\u003e\u003cbr\u003e \u003ca href=\"https:\/\/stmtuned.com\/collections\/aem-products\" style=\"color: #afafaf;\" target=\"blank\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more AEM Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":50562837840214,"sku":"AEM-30-2224","price":447.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/30-2224-aem-cd-8-channel-egt-can-module-1.jpg?v=1749205414"},{"product_id":"30-2226-aem-cd-6-channel-can-sensor-module","title":"AEM Carbon 6 Channel CAN Sensor Module (30-2226)","description":"AEM 6 Channel CAN Sensor Module provides an affordable and easy way to add temperature, pressure, fuel level, and tachometer signals on to a CD-5\/CD-7 Carbon Digital dash through AEMnet CAN bus! It supports the Bosch CAN 2.0b standard, making it compatible with many third-party devices that accept a programmable CAN bus input, which also allows you to add additional channels to a non-AEM ECU, dash or logger.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbureted Vehicles\u003c\/strong\u003e\u003cbr\u003eThe 6 Channel CAN Sensor Module provides the basic channels that users need to get data onto a CD Carbon Digital Dash in a carbureted vehicle, including tachometer, fuel level, and pressure\/temp sensors. Vehicle speed can be achieved by using a GPS-enabled dash or by adding a Vehicle Dynamics Module.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e2008+ Stock\/Reflashed ECU\u003c\/strong\u003e\u003cbr\u003eThis module is the perfect add-on for CD Carbon Dash owners who are sending channels to a CD Carbon Dash from an OBDII CAN stock ECU and want to add additional channels that are not available through the factory CAN stream.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eStandalone CAN-based EFI\u003c\/strong\u003e\u003cbr\u003eRacers who are using a non-AEM CAN-based programmable ECU and have consumed all of the inputs can use this module to add additional channels to the dash that they want to see or log (logging requires CD Carbon Logging Dash).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat You Get\u003c\/strong\u003e\u003cbr\u003eThe 6 Channel CAN Sensor Module includes two 0-5v analog inputs, two temp inputs, RPM input, and fuel level input. The enclosure is IP67-rated and the unit is dustproof\/water-resistant. A 12-Pin DTM-style connector and pins are included.\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) temperature (thermistor) inputs\u003c\/li\u003e\n\u003cli\u003eTwo (2) dedicated 0-5V analog inputs\u003c\/li\u003e\n\u003cli\u003eOne (1) dedicated fuel level input (0 to 250 Ohm range)\u003c\/li\u003e\n\u003cli\u003eOne (1) tachometer\/coil input\u003c\/li\u003e\n\u003cli\u003eFixed CAN bus speed, header length, and base address\u003c\/li\u003e\n\u003cli\u003eIP67 Potted Enclosure \/ Sealed Connector - \"dust tight\" and protected against water spray\u003c\/li\u003e\n\u003cli\u003eProtected inputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan style=\"color: #ff2a00;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003e We are sorry, discount codes are not available for AEM products.\u003cbr\u003e\u003cbr\u003e \u003ca style=\"color: #afafaf;\" href=\"https:\/\/stmtuned.com\/collections\/aem-products\" target=\"blank\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more AEM Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":50562838856022,"sku":"AEM-30-2226","price":173.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/30-2226-aem-cd-6-channel-can-sensor-module-1.jpg?v=1749205416"},{"product_id":"30-2212-aem-cd-22-channel-can-sensor-module","title":"AEM Carbon 22 Channel CAN Sensor Module (30-2212)","description":"AEM 22 Channel CAN Sensor Module converts analog, digital and frequency inputs into an AEMnet CAN bus signal that can be transmitted to the CD-5 and CD-7 Digital Dashes.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore Info:\u003c\/span\u003e\u003cbr\u003eThis expansion module provides a way for users with carbureted vehicles to add a CD Digital Dash Display and lets users with existing CAN-based devices add more channels to the display for viewing and\/or data logging (data logging requires CD-5L Carbon or CD-7L logging Dashes). The 22-Channel CAN Sensor Module is compatible with the CD Dashes only; it will run in parallel with 3rd party CAN devices on the CD dashes but it is currently not compatible with AEM’s AQ-1 Data Logger, Series 2 or Infinity ECUs, or 3rd party ECUs or loggers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWHAT YOU GET\u003c\/strong\u003e\u003cbr\u003eThe 22 Channel CAN Sensor Module includes four 0-5v analog inputs, four Temp inputs, four user-configurable inputs for 0-5v, Temp (including RTD), a dedicated fuel level input, six configurable digital inputs or frequency-based inputs for switched or duty cycle, a Tach input and two VR inputs for crank, wheel or driveshaft speeds. A harness is included with pre-pinned, 36-inch color-coded wires to connect inputs, and a DTM-style AEMnet cable to connect to a CD-5 or CD-7 Carbon Dash. Users can select the CAN speed delivery rate.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFOR CARBURETED VEHICLES\u003c\/strong\u003e\u003cbr\u003eThe 22 Channel CAN Sensor Module has everything that users need to get data onto the Dash in a carbureted vehicle, including tachometer and fuel level, wheel speeds for MPH, and pressure\/temp sensors. Users can daisy-chain two of the Modules together, which is ideal for enthusiasts who have a logging CD Dash and want to expand their logging capabilities.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFOR CAN-BASED EFI USERS\u003c\/strong\u003e\u003cbr\u003eRacers who are using a CAN-based programmable ECU and have consumed all of the inputs in the ECUs now have a way to add more channels to a CD Dash without having to purchase multiple CAN-based devices.\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eConvert analog, digital and frequency-based inputs to AEMnet CAN bus for display on CD-5 Carbon and CD-7 Dashes!\u003c\/li\u003e\n\u003cli\u003ePerfect for users with carbureted vehicles who want to add a CD Dash display\u003c\/li\u003e\n\u003cli\u003eIdeal for EFI users who want to add more channels to a CD Dash without purchasing multiple CAN-based devices\u003c\/li\u003e\n\u003cli\u003eDaisy chain two Modules together for additional channels\u003c\/li\u003e\n\u003cli\u003eIP65-rated enclosure is ‘dust tight’ and water resistant\u003c\/li\u003e\n\u003cli\u003eWiring harness included with 36-inch flying leads and pre-wired CAN cable\u003c\/li\u003e\n\u003cli\u003eFour dedicated 0-5V Analog inputs\u003c\/li\u003e\n\u003cli\u003eFour Temperature (thermistor) inputs\u003c\/li\u003e\n\u003cli\u003eFour user-configurable Analog inputs, (jumper selectable; 0-5v, thermistor, or RTD)\u003c\/li\u003e\n\u003cli\u003eOne dedicated Fuel Level input (0 to 250 ohm range)\u003c\/li\u003e\n\u003cli\u003eSix configurable Digital or Frequency inputs, active low, protected to ~18v, frequency, duty cycle or simple switch\u003c\/li\u003e\n\u003cli\u003eOne Tach input, trigger when low, 12v internal Pull Up\u003c\/li\u003e\n\u003cli\u003eTwo VR Pair Frequency inputs (crank, wheel or drive shaft speeds)\u003c\/li\u003e\n\u003cli\u003eJumper selectable CAN bus speeds, 250k,500k,1M\u003c\/li\u003e\n\u003cli\u003eJumper selectable terminating resistor\u003c\/li\u003e\n\u003cli\u003eJumper selectable header length, 11bit or 29 bit\u003c\/li\u003e\n\u003cli\u003eDimensions: 4.7” L x 4.3” W x 1.4” H (not including connector)\u003c\/li\u003e\n\u003cli\u003eWeight: 6.4oz \/ 180g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan style=\"color: #ff2a00;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003e We are sorry, discount codes are not available for AEM products.\u003cbr\u003e\u003cbr\u003e \u003ca style=\"color: #afafaf;\" href=\"https:\/\/stmtuned.com\/collections\/aem-products\" target=\"blank\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more AEM Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":50562839413078,"sku":"AEM-30-2212","price":374.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/30-2212-aem-cd-22-channel-can-sensor-module-5.jpg?v=1749205425"},{"product_id":"30-2208-aem-cd-gps-antenna","title":"AEM Carbon GPS Antenna (30-2208)","description":"AEM replacement GPS antenna for CD Carbon Digital Dashes CD-5 and CD-7, includes flat versions as well.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore Info:\u003c\/span\u003e\u003cbr\u003eAEM’s GPS Replacement antenna can be used for the following AEM Electronics devices:\u003cbr\u003e\u003cbr\u003e• CD Carbon GPS-enabled Digital Dash Displays\u003cbr\u003e• Vehicle Dynamics Module\u003cbr\u003e• GPS Module\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003e We are sorry, discount codes are not available for AEM products.\u003cbr\u003e\u003cbr\u003e \u003ca style=\"color: #afafaf;\" href=\"https:\/\/stmtuned.com\/collections\/aem-products\" target=\"blank\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more AEM Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":50562839445846,"sku":"AEM-30-2208","price":63.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/30-2208-aem-cd-gps-antenna.jpg?v=1749205425"},{"product_id":"30-3610-aem-cd-external-dash-button-kit","title":"AEM Carbon Dash External Button Kit (30-3610)","description":"AEM 2-button External Button Kit for CD Carbon dashes. This kit includes two waterproof buttons with flying leads that allow you to change pages on CD Carbon Flat Panel dashes and add steering wheel buttons to change pages on CD Carbon Dashes if you do not want to use the integrated buttons.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eIncludes:\u003c\/span\u003e\u003cbr\u003e(2) Waterproof Buttons with Flying Leads\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore Info:\u003c\/span\u003e\u003cbr\u003eAEM Remote Button Kit easily wires into the harness of a CD Carbon Digital Dash Display for changing pages and resetting various functions like countdown and lap timers. Once installed these buttons perform the same functions as the built-in buttons on the dash display enclosure, but operate remotely and independent of them. Unlike on\/off buttons, these buttons are momentary and non-latching.\u003cbr\u003e\u003cbr\u003eThis kit includes one blue and one yellow potted weatherproof button that can withstand the rigors of an open-cockpit environment, washers and locking nuts for installation. The 20-inch flying leads provide plenty of length for installing into the 12-pin DTM-style harness on a CD Carbon Digital Dash.\u003cbr\u003e\u003cbr\u003eNOTE: This Remote Button Kit is necessary if you want to change pages on CD Carbon Flat Panel Dashes.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003e We are sorry, discount codes are not available for AEM products.\u003cbr\u003e\u003cbr\u003e \u003ca style=\"color: #afafaf;\" href=\"https:\/\/stmtuned.com\/collections\/aem-products\" target=\"blank\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more AEM Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":50562839576918,"sku":"AEM-30-3610","price":53.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/30-3610-aem-cd-external-dash-button-kit-1.jpg?v=1749205434"},{"product_id":"stm-evolution-x-base-tune-with-stock-injectors","title":"STM Evolution X Base Tune (for Stock Injectors)","description":"\u003cspan style=\"color: #ff0000;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2008-2015 Mitsubishi Evolution X \u003cbr\u003e(* Must have stock injectors *)\u003cbr\u003e(* Must have Laptop\/EcuFlash *)\u003cbr\u003e(* Leave a detailed mod list in the notes at checkout *)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eDescription:\u003c\/span\u003e\u003cbr\u003eThe STM Evolution X Base Tune calibration is intended to get you rolling in the right direction with proven results. These tunes have seen gains of over 60 wheel horse power and torque. While the gains are great and typically safe, we still recommend data logging and making fine adjustments as needed.\u003cbr\u003e\u003cbr\u003eWe are offering these tunes at a reduced price to the public with the intention of getting you in here and on the dyno.\u003cbr\u003e\u003cbr\u003eIf you've recently added a couple mods to your Evo X and would like to come in for a full custom tune, this flash will give your Evo X a nice base map to get started then you can bring your Evo in and we can do the fine tuning on the dyno.\u003cbr\u003e\u003cbr\u003eThe STM Base Tune is $250 and our hourly shop rate is $150. A healthy car can complete the tune in one hour bringing the total to $400.\u003cbr\u003e\u003cbr\u003eYou will need a \u003ca style=\"color: #ffffff; text-decoration: underline;\" target=\"blank\" href=\"https:\/\/stmtuned.com\/products\/tactrix-openport-2-0\"\u003e Tactrix Openport \u003c\/a\u003e and you will need to install the STM Base Tune. These ECU flashes are meant for use with stock injectors only. You must have a manual boost controller. We recommend the \u003ca style=\"color: #ffffff; text-decoration: underline;\" target=\"blank\" href=\"https:\/\/stmtuned.com\/collections\/mitsubishi-evolution-x-boost-controllers-solenoids\/products\/hallman-pro-boost-controller\"\u003e Hallman Pro\u003c\/a\u003e. Please leave a detailed mod list in the comments at checkout and your best contact phone number.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eIncludes: \u003c\/span\u003e\u003cbr\u003e(1) Base calibration loaded on a USB flash drive\u003cbr\u003e(Optional) Tactrix Openport (TAC-OP20)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eRequired for Install:\u003c\/span\u003e\u003cbr\u003e• Manual Boost Controller \u003cbr\u003e• Detailed mod list left in notes at checkout\u003cbr\u003e• Stock injectors \u003cbr\u003e• Ability to flash tune via \u003ca style=\"color: #ffffff; text-decoration: underline;\" target=\"blank\" href=\"https:\/\/stmtuned.com\/products\/tactrix-openport-2-0\"\u003e Tactrix Openport \u003cbr\u003e\u003cbr\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003eHow Do I Install This?\u003c\/span\u003e\u003cbr\u003eThis is somewhat technical.\u003cbr\u003eIf you are not comfortable doing this, or don't understand any of this, leave it to the professionals!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eThe Short Version:\u003c\/span\u003e\u003cbr\u003eYou will need a laptop with the EcuFlash Software. Install the file from the STM USB. Use the Tactrix to connect to your OBDII port. This will connect your laptop to the Evo X ECU. Install the file into your ECU.\u003cbr\u003e\u003cbr\u003eAgain, this is not a full, custom tune. It is meant to get you started on a safe base map after a few of your first mods have been installed. You will still need to fine-tune. This base map will get your car drivable and safe so you can come to either STM to finish off the tune, or to your local tuner.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eYou must have a laptop.\u003c\/span\u003e\u003cbr\u003eDownload the Tactric EcuFlash Software.\u003cbr\u003eBe comfortable changing the maps your car runs on.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eThe Long Version:\u003c\/span\u003e\u003cbr\u003eRead all of this:\u003cbr\u003e\u003ca style=\"color: #ffffff; text-decoration: underline;\" target=\"blank\" href=\"https:\/\/www.tactrix.com\/index.php?option=com_content\u0026amp;view=category\u0026amp;layout=blog\u0026amp;id=36\"\u003e Tactric \u0026amp; EcuFlash\u003c\/a\u003e","brand":"STM Tuned Inc.","offers":[{"title":"2008 \/ Stock MAF \/ With Tactrix Openport","offer_id":50563147923798,"sku":"STM-USB-TUNE-EVOX-1","price":428.12,"currency_code":"USD","in_stock":true},{"title":"2008 \/ Stock MAF \/ No Tactrix","offer_id":50563147956566,"sku":"STM-USB-TUNE-EVOX-2","price":253.12,"currency_code":"USD","in_stock":true},{"title":"2008 \/ 3\" MAF \/ With Tactrix Openport","offer_id":50563147989334,"sku":"STM-USB-TUNE-EVOX-3","price":428.12,"currency_code":"USD","in_stock":true},{"title":"2008 \/ 3\" MAF \/ No Tactrix","offer_id":50563148022102,"sku":"STM-USB-TUNE-EVOX-4","price":253.12,"currency_code":"USD","in_stock":true},{"title":"2010 \/ Stock MAF \/ With Tactrix Openport","offer_id":50563148054870,"sku":"STM-USB-TUNE-EVOX-5","price":428.12,"currency_code":"USD","in_stock":true},{"title":"2010 \/ Stock MAF \/ No Tactrix","offer_id":50563148087638,"sku":"STM-USB-TUNE-EVOX-6","price":253.12,"currency_code":"USD","in_stock":true},{"title":"2010 \/ 3\" MAF \/ With Tactrix Openport","offer_id":50563148120406,"sku":"STM-USB-TUNE-EVOX-7","price":428.12,"currency_code":"USD","in_stock":true},{"title":"2010 \/ 3\" MAF \/ No Tactrix","offer_id":50563148153174,"sku":"STM-USB-TUNE-EVOX-8","price":253.12,"currency_code":"USD","in_stock":true},{"title":"2011 \/ Stock MAF \/ With Tactrix Openport","offer_id":50563148185942,"sku":"STM-USB-TUNE-EVOX-9","price":428.12,"currency_code":"USD","in_stock":true},{"title":"2011 \/ Stock MAF \/ No Tactrix","offer_id":50563148218710,"sku":"STM-USB-TUNE-EVOX-10","price":253.12,"currency_code":"USD","in_stock":true},{"title":"2011 \/ 3\" MAF \/ With Tactrix Openport","offer_id":50563148251478,"sku":"STM-USB-TUNE-EVOX-11","price":428.12,"currency_code":"USD","in_stock":true},{"title":"2011 \/ 3\" MAF \/ No Tactrix","offer_id":50563148284246,"sku":"STM-USB-TUNE-EVOX-12","price":253.12,"currency_code":"USD","in_stock":true},{"title":"2012 \/ Stock MAF \/ With Tactrix Openport","offer_id":50563148317014,"sku":"STM-USB-TUNE-EVOX-13","price":428.12,"currency_code":"USD","in_stock":true},{"title":"2012 \/ Stock MAF \/ No Tactrix","offer_id":50563148349782,"sku":"STM-USB-TUNE-EVOX-14","price":253.12,"currency_code":"USD","in_stock":true},{"title":"2012 \/ 3\" MAF \/ With Tactrix Openport","offer_id":50563148382550,"sku":"STM-USB-TUNE-EVOX-15","price":428.12,"currency_code":"USD","in_stock":true},{"title":"2012 \/ 3\" MAF \/ No Tactrix","offer_id":50563148415318,"sku":"STM-USB-TUNE-EVOX-16","price":253.12,"currency_code":"USD","in_stock":true},{"title":"2013 \/ Stock MAF \/ With Tactrix Openport","offer_id":50563148448086,"sku":"STM-USB-TUNE-EVOX-17","price":428.12,"currency_code":"USD","in_stock":true},{"title":"2013 \/ Stock MAF \/ No Tactrix","offer_id":50563148480854,"sku":"STM-USB-TUNE-EVOX-18","price":253.12,"currency_code":"USD","in_stock":true},{"title":"2013 \/ 3\" MAF \/ With Tactrix Openport","offer_id":50563148513622,"sku":"STM-USB-TUNE-EVOX-19","price":428.12,"currency_code":"USD","in_stock":true},{"title":"2013 \/ 3\" MAF \/ No Tactrix","offer_id":50563148546390,"sku":"STM-USB-TUNE-EVOX-20","price":253.12,"currency_code":"USD","in_stock":true},{"title":"2014 \/ Stock MAF \/ With Tactrix Openport","offer_id":50563148579158,"sku":"STM-USB-TUNE-EVOX-21","price":428.12,"currency_code":"USD","in_stock":true},{"title":"2014 \/ Stock MAF \/ No Tactrix","offer_id":50563148611926,"sku":"STM-USB-TUNE-EVOX-22","price":253.12,"currency_code":"USD","in_stock":true},{"title":"2014 \/ 3\" MAF \/ With Tactrix Openport","offer_id":50563148644694,"sku":"STM-USB-TUNE-EVOX-23","price":428.12,"currency_code":"USD","in_stock":true},{"title":"2014 \/ 3\" MAF \/ No Tactrix","offer_id":50563148677462,"sku":"STM-USB-TUNE-EVOX-24","price":253.12,"currency_code":"USD","in_stock":true},{"title":"2015 \/ Stock MAF \/ With Tactrix Openport","offer_id":50563148710230,"sku":"STM-USB-TUNE-EVOX-25","price":442.12,"currency_code":"USD","in_stock":true},{"title":"2015 \/ Stock MAF \/ No Tactrix","offer_id":50563148742998,"sku":"STM-USB-TUNE-EVOX-26","price":253.12,"currency_code":"USD","in_stock":true},{"title":"2015 \/ 3\" MAF \/ With Tactrix Openport","offer_id":50563148775766,"sku":"STM-USB-TUNE-EVOX-27","price":428.12,"currency_code":"USD","in_stock":true},{"title":"2015 \/ 3\" MAF \/ No Tactrix","offer_id":50563148808534,"sku":"STM-USB-TUNE-EVOX-28","price":253.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/stm-evo-x-usb-base-tune-with-tactrix.jpg?v=1749209787"},{"product_id":"radium-ecu-mount-kit-for-ft86-brz-frs-86-20-0352","title":"Radium ECU Mount Kit for FT86 BRZ FRS 86 (20-0352)","description":"The Radium ECU Mount Kit replaces the heavy MIG welded steel mount. It permits easier access to the RH side of the engine complimenting components such as the Radium Fuel Rail Kit. Laser cut and formed from 5052 aluminum, these come black anodized for a stealth appearance.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e• 2012-2018+ Subaru BRZ\u003cbr\u003e• 2013-2016 Scion FR-S\u003cbr\u003e• 2012+ Toyota 86\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eInstall Instructions:\u003c\/span\u003e\u003cbr\u003e\u003ca style=\"color: #ffffff; text-decoration: underline;\" target=\"blank\" href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0164.PDF\"\u003e Download PDF\u003c\/a\u003e","brand":"Radium","offers":[{"title":"Default Title","offer_id":50563151364438,"sku":"RAD-20-0352","price":55.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/20-0352-radium-ecu-mount-kit-ft86-brz-frs-86-1.jpg?v=1749209795"},{"product_id":"syvecs-ecu-kit-for-nissan-350z-s7plus-n350z","title":"Syvecs ECU Kit for Nissan 350Z (S7PLUS-N350Z)","description":"The Syvecs Nissan 350Z full standalone engine management system is ideal for forced induction applications and owners who want added safety!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2003-2008 Nissan 350Z\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eIncludes:\u003c\/span\u003e \u003cbr\u003e(1) Syvecs S7Plus ECU\u003cbr\u003e(1) Loom Adapter\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eShipping Times:\u003c\/span\u003e\u003cbr\u003eSyvecs products generally ship in 2-4 weeks.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003eWe are sorry, discount codes are not available with this product.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eProduct Links:\u003c\/span\u003e\u003cbr\u003e\u003ca style=\"color: #ffffff; text-decoration: underline;\" target=\"blank\" href=\"http:\/\/www.syvecs.com\/downloads\/Syvecs_Nissan_350z_Manual.pdf\"\u003eInstallation Manual\u003c\/a\u003e\u003cbr\u003e \u003ca style=\"color: #ffffff; text-decoration: underline;\" target=\"blank\" href=\"http:\/\/www.syvecs.com\/forum\/viewtopic.php?f=8\u0026amp;t=122\"\u003eSoftware\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eFull Description:\u003c\/span\u003e\u003cbr\u003eSyvecs Nissan 350z PnP kit brings a new level of engine management control to the 350z with a complete standalone engine control module.\u003cbr\u003e\u003cbr\u003eBy simply plugging in the PnP kit, a whole new level of control is available allowing some of the following features:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eAbility to select desired engine map, boost level, traction and launch control levels through steering wheel buttons or external 12 position switch. Indicated Map is shown on RPM Display(See Media)\u003c\/li\u003e\n\u003cli\u003eFully adjustable Launch control with Anti-lag strategies and Ramp in Maps. 12 live switchable maps available\u003c\/li\u003e\n\u003cli\u003eAdjustable Antilag\u003c\/li\u003e\n\u003cli\u003eFully adjustable Traction control system with Lateral G targeting. 12 live switchable maps available\u003c\/li\u003e\n\u003cli\u003eFull Variable Valve Timing\u003c\/li\u003e\n\u003cli\u003eClosed loop Lambda Control using standard sensor\u003c\/li\u003e\n\u003cli\u003eFully adjustable closed loop boost control with launch level adjustments and trims for turbo speed, air charge, engine coolant temp, exhaust gas temperatures etc\u003c\/li\u003e\n\u003cli\u003eMonitor and trimming of exhaust gas temperatures\u003c\/li\u003e\n\u003cli\u003eBuilt in data logging of up to 8 hours, with data rates at up to 1000hz\u003c\/li\u003e\n\u003cli\u003ePit lane limiter strategies, great for building boost on a roll\u003c\/li\u003e\n\u003cli\u003eAntitheft and valet modes\u003c\/li\u003e\n\u003cli\u003eSuper fast connection via RJ45 Ethernet port for live tuning anywhere in the world or even remotely if on track and connected to a wireless unit.\u003c\/li\u003e\n\u003cli\u003eConfigurable Engine Safety Trips on all important parameters like oil temperature, oil pressure, water temp and crankcase pressure.\u003c\/li\u003e\n\u003cli\u003eFuel pump control of both main, and sub pumps, as well as Relative fuel pressure monitoring and limiting in the event of fuel pressure dropping on boost.\u003c\/li\u003e\n\u003cli\u003e4 different Pedal to Throttle Angle maps with multipliers for different parameters e.g. speed. Again adjustable via steering wheel buttons\u003c\/li\u003e\n\u003cli\u003eConfigurable individual cylinder closed loop knock control, to suit any cylinder modification with adjustments to frequency, windows for listening and gains for each cylinder. Ability to trigger full cylinder shutdown in severe knock conditions.\u003c\/li\u003e\n\u003cli\u003eChange throttle blip requests to match your torque band. Especially useful on oversized turbo installations.\u003c\/li\u003e\n\u003cli\u003eRun up to 7bar map sensors\u003c\/li\u003e\n\u003cli\u003eControl high or low impedance injectors\u003c\/li\u003e\n\u003cli\u003eChange injector dead times based on voltage levels for proper control\u003c\/li\u003e\n\u003cli\u003eChange injector end angle to ensure injection point is properly calibrated\u003c\/li\u003e\n\u003cli\u003eAbility to fit any type of external sensor to monitor and trigger safety trips from anything from crank case pressure to damper position\u003c\/li\u003e\n\u003cli\u003eAbility to use any size DBW throttle body e.g. Chevrolet LS7\u003c\/li\u003e\n\u003cli\u003eWet and Dry – Wet and Dry nitrous control with ability to drive solenoids directly and control n20 heaters via pressure monitoring\u003c\/li\u003e\n\u003cli\u003eAbility to control any external vehicle features based on sensor inputs e.g. Adjustable rear wing linked to G force or exhaust control valves\u003c\/li\u003e\n\u003cli\u003eConnect any race series dash or even one of our partners’ Touchscreen CANBUS adjustment \/display units\u003c\/li\u003e\n\u003cli\u003eView any input live with built in scope up to 1000hz\u003c\/li\u003e\n\u003cli\u003eAnd much, much more!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e \u003ca href=\"https:\/\/stmtuned.com\/collections\/syvecs-products\"\u003e\u003c\/a\u003e","brand":"Syvecs","offers":[{"title":"Default Title","offer_id":50563193143638,"sku":"SYV-S7PLUS-N350Z","price":4156.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/syvecs-ecu_d185e556-77c9-477a-ac3e-e7ada94a611d.jpg?v=1749210301"},{"product_id":"syvecs-ecu-kit-for-nissan-370z-s7plus-n370z","title":"Syvecs ECU Kit for Nissan 370Z (S7PLUS-N370Z)","description":"The Syvecs Nissan 370Z Plug and Play S7Plus Kit brings a new level of engine management!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2009-2019 Nissan 370Z\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eIncludes:\u003c\/span\u003e \u003cbr\u003e(1) Syvecs S7Plus ECU\u003cbr\u003e(1) Loom Adapter\u003cbr\u003e(1) Tiny Can Bridge\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eShipping Times:\u003c\/span\u003e\u003cbr\u003eSyvecs products generally ship in 2-4 weeks.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003eWe are sorry, discount codes are not available with this product.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eProduct Links:\u003c\/span\u003e\u003cbr\u003e\u003ca style=\"color: #ffffff; text-decoration: underline;\" target=\"blank\" href=\"http:\/\/www.syvecs.com\/downloads\/Syvecs_Nissan_370Z_Kit.pdf\"\u003eInstallation Manual\u003c\/a\u003e\u003cbr\u003e \u003ca style=\"color: #ffffff; text-decoration: underline;\" target=\"blank\" href=\"http:\/\/www.syvecs.com\/forum\/viewtopic.php?f=8\u0026amp;t=122\"\u003eSoftware\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eFull Description:\u003c\/span\u003e\u003cbr\u003eThe Syvecs 370Z Kit brings a new level of Engine Management control to the Nissan 370Z\u003cbr\u003e\u003cbr\u003eBy simply plugging in the kit a whole new level of control is available offering the following and more!\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eLive Tuning of every aspect of the engine’s calibration, including signals sent to the ABS and TCM\u003c\/li\u003e\n\u003cli\u003eAbility to select desired engine map, boost level, traction and launch control levels through steering wheel buttons\u003c\/li\u003e\n\u003cli\u003eFully adjustable Launch control with Anti-lag strategies and Ramp in Maps\u003c\/li\u003e\n\u003cli\u003eFull Variable Valve Timing control\u003c\/li\u003e\n\u003cli\u003eFull VVEL Control\u003c\/li\u003e\n\u003cli\u003eFlex Fuel control\u003c\/li\u003e\n\u003cli\u003eFully functional with every other ECU on the Car\u003c\/li\u003e\n\u003cli\u003eClosed loop Dual Lambda Control using OEM Denso Lambda Sensors\u003c\/li\u003e\n\u003cli\u003eFully adjustable closed loop boost control for FI models with launch level adjustments and trims for turbo speed, air charge, engine coolant temp, exhaust gas temperatures etc\u003c\/li\u003e\n\u003cli\u003eMonitor and trimming of exhaust gas temperatures\u003c\/li\u003e\n\u003cli\u003eBuilt in data logging using a market leading analysis software of up to 8 hours, with data rates at up to 1000hz\u003c\/li\u003e\n\u003cli\u003eRolling Antilag \/ Pit lane limiter strategies, great for building boost on a roll\u003c\/li\u003e\n\u003cli\u003eAntitheft and valet modes\u003c\/li\u003e\n\u003cli\u003eSuper fast connection via RJ45 Ethernet port for live tuning anywhere in the world or even remotely if on track if connected to a wireless unit.\u003c\/li\u003e\n\u003cli\u003eAdjustable traction control strategies based on lateral g, steering angle and\/or individual wheel speed monitoring.\u003c\/li\u003e\n\u003cli\u003e4 programmable and selectable target slip maps. An immediate torque reduction can be applied by the ECU via ignition retard or a fuel cut.\u003c\/li\u003e\n\u003cli\u003eConfigurable Engine Safety Trips on all important parameters like oil temperature, oil pressure.\u003c\/li\u003e\n\u003cli\u003eFuel pump control of both main, and sub pumps, as well as Relative fuel pressure monitoring and limiting in the event of fuel pressure dropping on boost.\u003c\/li\u003e\n\u003cli\u003e4 different Pedal to Throttle Angle maps with multipliers for different parameters e.g. speed. Again adjustable via steering wheel buttons\u003c\/li\u003e\n\u003cli\u003eConfigurable individual cylinder closed loop knock control, to suit any cylinder modification with adjustments to frequency, windows for listening and gains for each cylinder. Ability to trigger full cylinder shutdown in severe knock conditions.\u003c\/li\u003e\n\u003cli\u003eAbility to change torque levels or demand levels sent to 4WD unit and TCM ECU for changing of up shift and down shift points, clutch pressures and diff tightness.\u003c\/li\u003e\n\u003cli\u003eChange torque reduction levels on shifts. Essential for very high power GTRs where the maximum reduction available via the stock ECU is not enough to prevent damage to components\u003c\/li\u003e\n\u003cli\u003eAbility to change Torque ramp in after launch\u003c\/li\u003e\n\u003cli\u003eChange throttle blip requests to match your torque band. Especially useful on oversized turbo installations.\u003c\/li\u003e\n\u003cli\u003eRun up to 7bar map sensors\u003c\/li\u003e\n\u003cli\u003eControl high or low impedance injectors\u003c\/li\u003e\n\u003cli\u003eControl up to 12 injectors for high power installations where staged injection may be required\u003c\/li\u003e\n\u003cli\u003eChange injector dead times based on voltage levels for proper control\u003c\/li\u003e\n\u003cli\u003eChange injector end angle to ensure injection point is properly calibrated\u003c\/li\u003e\n\u003cli\u003eAbility to fit any type of external sensor to monitor and trigger safety trips from anything from crank case pressure to damper position\u003c\/li\u003e\n\u003cli\u003eAbility to use any size DBW throttle body e.g. Chevrolet LS7\u003c\/li\u003e\n\u003cli\u003eWet and Dry - Wet and Dry nitrous control with ability to drive solenoids directly and control n20 heaters via pressure monitoring\u003c\/li\u003e\n\u003cli\u003eAbility to control any external vehicle features based on sensor inputs e.g. Adjustable rear wing linked to G force or exhaust control valves\u003c\/li\u003e\n\u003cli\u003eConnect any race series dash or even one of our partners’ Touchscreen CANBUS adjustment \/display units\u003c\/li\u003e\n\u003cli\u003eView any input live with built in scope up to 1000hz\u003c\/li\u003e\n\u003cli\u003eAnd much, much more!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cem\u003eQ) Do you control the OEM VVT\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) Yes, this is adjustable via Variable Valve timing calibrations, Can Change Intake and Exhaust Cam Targets\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eQ) Do you control the OEM VVEL\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) Yes, this is adjustable via Fan8 (VVEL Target)\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eQ) Do you support the Auto Transmission\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) Yes\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eQ) Can we Flat Foot Shift\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) Yes, The gearcut strategy takes full care of the Torque Reductions on shifts and allows you to change gear while fully on throttle\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eQ) Can you make the Manual Cars Rev Match on Downshifts\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) Yes, this is enabled and explained in the Manual\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eQ) Can you Adjust the Launch\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) Yes, its fully adjustable in stage and after also where a Limiter can be set based on Time or Speed\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eQ) Do you Supply a Base map for the Kit\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) Yes as with all our kits we supply a very good base calibration to get everything working for you\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eQ) Can we use the OBD port still to Log, Read Codes and Clear them on other ECUs on the car like ABS?\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) Yes via OEM Tools\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eSee it in action!\u003c\/span\u003e\u003cbr\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/DZQSNT5qZyY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003cbr\u003e\u003cbr\u003e \u003ca href=\"https:\/\/stmtuned.com\/collections\/syvecs-products\"\u003e\u003c\/a\u003e","brand":"Syvecs","offers":[{"title":"Default Title","offer_id":50563193209174,"sku":"SYV-S7PLUS-N370Z","price":4662.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/syvecs-ecu_11371117-f219-4ecd-b010-c0f96e5dfb65.jpg?v=1749210307"},{"product_id":"syvecs-ecu-kit-for-r35-gtr-s7plus-ngtr","title":"Syvecs ECU Kit for R35 GTR (S7PLUS-NGTR)","description":"The Syvecs GTR Plug and Play S7Plus Kit brings a new level of engine management! Used by some of the fastest GTR's on the planet that were first into the 8's, the 7's and now into the 6's!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2009-2018 Nissan R35 GT-R\u003cbr\u003e(* Does not currently support the 2019 GTR *)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eIncludes:\u003c\/span\u003e \u003cbr\u003e(1) Syvecs S7Plus ECU\u003cbr\u003e(1) GTR Loom\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eShipping Times:\u003c\/span\u003e\u003cbr\u003eSyvecs products generally ship in 2-4 weeks.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003eWe are sorry, discount codes are not available with this product.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eProduct Links:\u003c\/span\u003e\u003cbr\u003e\u003ca style=\"color: #ffffff; text-decoration: underline;\" target=\"blank\" href=\"http:\/\/www2.syvecs.com\/downloads\/Syvecs_SGTR_Manual.pdf\"\u003eInstallation Manual\u003c\/a\u003e\u003cbr\u003e \u003ca style=\"color: #ffffff; text-decoration: underline;\" target=\"blank\" href=\"http:\/\/www.syvecs.com\/forum\/viewtopic.php?f=8\u0026amp;t=122\"\u003eSoftware\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eFull Description:\u003c\/span\u003e\u003cbr\u003eIntroducing the Syvecs stand alone ECU Plug N Play kit for the Nissan GTR.\u003cbr\u003e\u003cbr\u003eSyvecs kits have been and are still being used by some of the fastest GTR's on the planet. Syvecs Plug N Play kits were on cars that were first into the 8's, the 7's and now into the 6's.\u003cbr\u003e\u003cbr\u003eFrom stage 1 street cars to 3000+bhp drag cars, the Syvecs brand is being represented all over the globe.\u003cbr\u003e\u003cbr\u003eThis kit currently does not support the 2019 model GTR.\u003cbr\u003e\u003cbr\u003eBy simply plugging in the kit a whole new level of control is available, offering the following and more!\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eLive tuning of every aspect of the engine’s calibration, including signals sent to the TCM and 4WD\u003c\/li\u003e\n\u003cli\u003eAdjustable Shift rpm and Speed lockout\u003c\/li\u003e\n\u003cli\u003eAbility to select desired engine map, boost level, traction and launch control levels through steering wheel buttons\u003c\/li\u003e\n\u003cli\u003eFully adjustable Launch control with Anti-lag strategies and Ramp in Maps\u003c\/li\u003e\n\u003cli\u003eFull Variable Valve Timing control\u003c\/li\u003e\n\u003cli\u003eFlex Fuel control\u003c\/li\u003e\n\u003cli\u003eFully functional with every other ECU on the Car\u003c\/li\u003e\n\u003cli\u003eClosed loop Dual Lambda Control\u003c\/li\u003e\n\u003cli\u003eFully adjustable closed loop boost control with launch level adjustments and trims for turbo speed, air charge, engine coolant temp, exhaust gas temperatures etc\u003c\/li\u003e\n\u003cli\u003eMonitor and trimming of exhaust gas temperatures\u003c\/li\u003e\n\u003cli\u003eBuilt in data logging using a market leading analysis software of up to 8 hours, with data rates at up to 1000hz\u003c\/li\u003e\n\u003cli\u003eRolling Antilag \/ Pit lane limiter strategies, great for building boost on a roll\u003c\/li\u003e\n\u003cli\u003eAntitheft and valet modes\u003c\/li\u003e\n\u003cli\u003eSuper fast connection via RJ45 Ethernet port for live tuning anywhere in the world or even remotely if on track if connected to a wireless unit.\u003c\/li\u003e\n\u003cli\u003eAdjustable traction control strategies based on lateral g, steering angle and\/or individual wheel speed monitoring.\u003c\/li\u003e\n\u003cli\u003e4 programmable and selectable target slip maps. An immediate torque reduction can be applied by the ECU via ignition retard or a fuel cut.\u003c\/li\u003e\n\u003cli\u003eConfigurable Engine Safety Trips on all important parameters like oil temperature, oil pressure.\u003c\/li\u003e\n\u003cli\u003eFuel pump control of both main, and sub pumps, as well as Relative fuel pressure monitoring and limiting in the event of fuel pressure dropping on boost.\u003c\/li\u003e\n\u003cli\u003e4 different Pedal to Throttle Angle maps with multipliers for different parameters e.g. speed. Again adjustable via steering wheel buttons\u003c\/li\u003e\n\u003cli\u003eConfigurable individual cylinder closed loop knock control, to suit any cylinder modification with adjustments to frequency, windows for listening and gains for each cylinder. Ability to trigger full cylinder shutdown in severe knock conditions.\u003c\/li\u003e\n\u003cli\u003eAbility to change torque levels or demand levels sent to 4WD unit and TCM ECU for changing of up shift and down shift points, clutch pressures and diff tightness.\u003c\/li\u003e\n\u003cli\u003eChange torque reduction levels on shifts. Essential for very high power GTRs where the maximum reduction available via the stock ECU is not enough to prevent damage to components\u003c\/li\u003e\n\u003cli\u003eAbility to change Torque ramp in after launch\u003c\/li\u003e\n\u003cli\u003eChange throttle blip requests to match your torque band. Especially useful on oversized turbo installations.\u003c\/li\u003e\n\u003cli\u003eRun up to 7bar map sensors\u003c\/li\u003e\n\u003cli\u003eControl high or low impedance injectors\u003c\/li\u003e\n\u003cli\u003eControl up to 12 injectors for high power installations where staged injection may be required\u003c\/li\u003e\n\u003cli\u003eChange injector dead times based on voltage levels for proper control\u003c\/li\u003e\n\u003cli\u003eChange injector end angle to ensure injection point is properly calibrated\u003c\/li\u003e\n\u003cli\u003eAbility to fit any type of external sensor to monitor and trigger safety trips from anything from crank case pressure to damper position\u003c\/li\u003e\n\u003cli\u003eAbility to use any size DBW throttle body e.g. Chevrolet LS7\u003c\/li\u003e\n\u003cli\u003eWet and Dry – Wet and Dry nitrous control with ability to drive solenoids directly and control n20 heaters via pressure monitoring\u003c\/li\u003e\n\u003cli\u003eAbility to control any external vehicle features based on sensor inputs e.g. Adjustable rear wing linked to G force or exhaust control valves\u003c\/li\u003e\n\u003cli\u003eConnect any race series dash or even one of our Syvecs Edition SDM displays.\u003c\/li\u003e\n\u003cli\u003eView any input live with built in scope up to 1000hz\u003c\/li\u003e\n\u003cli\u003eAnd much, much more!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan style=\"color: #ff0000;\"\u003eSee it in action!\u003c\/span\u003e\u003cbr\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/BewM5PF572g\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003e \u003ca href=\"https:\/\/stmtuned.com\/collections\/syvecs-products\"\u003e\u003c\/a\u003e","brand":"Syvecs","offers":[{"title":"Default Title","offer_id":50563193274710,"sku":"SYV-S7PLUS-NGTR","price":4518.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/syvecs-ecu_5485586c-8d52-46ee-a6c1-c5d24a4bb87b.jpg?v=1749210307"},{"product_id":"syvecs-ecu-kit-for-evo-x-s7plus-evox","title":"Syvecs ECU Kit for Evo X (S7PLUS-EVOX)","description":"The Syvecs Plug and Play ECU Kit for the Evolution X brings a new level of engine management control! Available for both manual 5-speed and SST transmissions. The SST option is pictured.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e2008-2015 Mitsubishi Lancer Evolution X\u003cbr\u003eSelect Manual or SST Transmission\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eIncludes:\u003c\/span\u003e \u003cbr\u003e(1) Syvecs S7Plus ECU\u003cbr\u003e(1) Evo X Loom Adapter\u003cbr\u003e(1) OEM Harvesting Connector\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eRecommended O2 Sensor:\u003c\/span\u003e\u003cbr\u003e• NTK O2 Sensor and Lead (\u003ca style=\"color: #ffffff; text-decoration: underline;\" target=\"blank\" href=\"https:\/\/stmtuned.com\/products\/syvecs-ntk-o2-sensor-lza09-e1-0025\"\u003eSYV-NTKPNP\u003c\/a\u003e) (Sold separately)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eShipping Times:\u003c\/span\u003e\u003cbr\u003eSyvecs products usually ship in 2-4 weeks.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003eWe are sorry, discount codes are not available with this product.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eProduct Links:\u003c\/span\u003e\u003cbr\u003e\u003ca style=\"color: #ffffff; text-decoration: underline;\" target=\"blank\" href=\"http:\/\/www.syvecs.com\/downloads\/Syvecs_Evo_X_Manual.pdf\"\u003eInstallation Manual\u003c\/a\u003e\u003cbr\u003e \u003ca style=\"color: #ffffff; text-decoration: underline;\" target=\"blank\" href=\"http:\/\/www.syvecs.com\/forum\/viewtopic.php?f=8\u0026amp;t=122\"\u003eSoftware\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eFull Description:\u003c\/span\u003e\u003cbr\u003eThe Syvecs Mitsubishi Evolution X PnP kit brings a new level of engine management control to the X platform.\u003cbr\u003e\u003cbr\u003eSupported on both Manual Transmission and SST!!!\u003cbr\u003e\u003cbr\u003eBy simply plugging in the kit a whole new level of control is available allowing some of the following features:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eLive Tuning of every aspect of the engine’s calibration\u003c\/li\u003e\n\u003cli\u003eAbility to select desired engine map, boost level, traction and launch control levels through 12 Position external switch\u003c\/li\u003e\n\u003cli\u003eFully adjustable Launch control with Anti-lag strategies and Ramp in Maps\u003c\/li\u003e\n\u003cli\u003eClosed loop Lambda Control using NTK Lambda\u003c\/li\u003e\n\u003cli\u003eSST Clutch Pressure Monitoring\u003c\/li\u003e\n\u003cli\u003eSST Clutch Slip Monitoring and Torque Reductions\u003c\/li\u003e\n\u003cli\u003eSST Adjustable Launch Control\u003c\/li\u003e\n\u003cli\u003eFlex Fuel control\u003c\/li\u003e\n\u003cli\u003eRolling Antilag\u003c\/li\u003e\n\u003cli\u003eAdditional Injector support for 4 Stage Injectors\u003c\/li\u003e\n\u003cli\u003eFactory AYC and ACD Control all working with OEM Dash\u003c\/li\u003e\n\u003cli\u003eAlternator Control\u003c\/li\u003e\n\u003cli\u003eFully adjustable closed loop boost control with launch level adjustments and trims for turbo speed, air charge, engine coolant temp, exhaust gas temperatures etc\u003c\/li\u003e\n\u003cli\u003eMonitor and trimming of exhaust gas temperatures\u003c\/li\u003e\n\u003cli\u003eBuilt in data logging using a market leading analysis software of up to 8 hours, with data rates at up to 1000hz\u003c\/li\u003e\n\u003cli\u003eRolling Antilag \/ Pit lane limiter strategies, great for building boost on a roll\u003c\/li\u003e\n\u003cli\u003eAntitheft and valet modes\u003c\/li\u003e\n\u003cli\u003eSuper fast connection via RJ45 Ethernet port for live tuning anywhere in the world or even remotely if on track if connected to a wireless unit.\u003c\/li\u003e\n\u003cli\u003eAdjustable traction control strategies based on lateral g, GPS Speed and\/or individual wheel speed monitoring.\u003c\/li\u003e\n\u003cli\u003e4 programmable and selectable target slip maps. An immediate torque reduction can be applied by the ECU via ignition retard or a fuel cut.\u003c\/li\u003e\n\u003cli\u003eConfigurable Engine Safety Trips on all important parameters like oil temperature, oil pressure.\u003c\/li\u003e\n\u003cli\u003eFuel pump control of both main, as well as Relative fuel pressure monitoring and limiting in the event of fuel pressure dropping on boost.\u003c\/li\u003e\n\u003cli\u003e4 different Pedal to Throttle Angle maps with multipliers for different parameters e.g. speed. Again adjustable via steering wheel buttons\u003c\/li\u003e\n\u003cli\u003eConfigurable individual cylinder closed loop knock control, to suit any cylinder modification with adjustments to frequency, windows for listening and gains for each cylinder. Ability to trigger full cylinder shutdown in severe knock conditions.\u003c\/li\u003e\n\u003cli\u003eAbility to change Torque ramp in after launch\u003c\/li\u003e\n\u003cli\u003eRun up to 7bar map sensors\u003c\/li\u003e\n\u003cli\u003eChange injector dead times based on voltage levels for proper control\u003c\/li\u003e\n\u003cli\u003eChange injector end angle to ensure injection point is properly calibrated\u003c\/li\u003e\n\u003cli\u003eAbility to fit any type of external sensor to monitor and trigger safety trips from anything from crank case pressure to damper position\u003c\/li\u003e\n\u003cli\u003eAbility to use any size DBW throttle body e.g. Chevrolet LS7\u003c\/li\u003e\n\u003cli\u003eWet and Dry – Wet and Dry nitrous control with ability to drive solenoids directly and control n20 heaters via pressure monitoring\u003c\/li\u003e\n\u003cli\u003eAbility to control any external vehicle features based on sensor inputs e.g. Adjustable rear wing linked to G force or exhaust control valves\u003c\/li\u003e\n\u003cli\u003eConnect any race series dash or even one of our partners’ Touchscreen CANBUS adjustment \/display units\u003c\/li\u003e\n\u003cli\u003eView any input live with built in scope up to 1000hz\u003c\/li\u003e\n\u003cli\u003eAnd much, much more!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cem\u003eQ) Do you control the OEM VVT\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) Yes, this is adjustable via Variable Valve timing calibrations, Can Change Intake and Exhaust Cam Targets\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eQ) Can we Flat Foot Shift\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) Yes, the gearcut strategy takes full care of the Torque Reductions on shifts and allows you to change gear while fully on throttle.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eQ) Can you make the manual cars rev match on downshifts?\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) Yes, this is enabled when the RPM is above 2000rpm and the Brake-Clutch are pressed together, Its fully closed loop.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eQ) Can you adjust the launch?\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) Yes, its fully adjustable in stage and after also where a limiter can be set based on Time or Speed\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eQ) Can you alter the clutch pressures?\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) Yes, by adjusting the torque values sent to the SST ECU we can change the amount of applied pressure\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eQ) Do you supply a base map for the kit?\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) Yes, as with all our kits we supply a very good base calibration to get everything working for you. This will be supplied via your Syvecs dealer.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eQ) How do we change calibrations?\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) This is done via the OEM Steering wheel Cruise buttons, Up is Cal Up, Down is Cal Down, Pulling back is Cal Override for rolling antilag.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eQ) What of the original OEM features will now not work?\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) None, even cruise control works but it doesn’t allow you to adjust speed on the stalk, only clamp a speed.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eQ) Can we use the OBD port still to Log, Read Codes and Clear them on other ECUs on the car like ABS?\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) Yes via OEM Tools or EvoScan\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eQ) Is the OEM water spray bar supported?\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eA) Yes this is done via the water injection strategy in output functions\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/stmtuned.com\/collections\/syvecs-products\"\u003e\u003c\/a\u003e","brand":"Syvecs","offers":[{"title":"5-Speed Manual Transmission","offer_id":50563193405782,"sku":"SYV-S7PLUS-EVOX-MT(with OEM)","price":4156.68,"currency_code":"USD","in_stock":true},{"title":"SST Transmission","offer_id":50563193438550,"sku":"SYV-S7PLUS-EVOX-SST (with OEM)","price":4156.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/syvecs-ecu-kit-for-evo-x-s7plus-evox-1.jpg?v=1749210316"},{"product_id":"dragy-gps-based-performance-meter","title":"Dragy GPS Based Performance Meter V2 (DRG70-C)","description":"Monitor your 0-60mph, 60-130mph, 100-200kmh, 1\/8 mile, 1\/4 mile, 1\/2 mile performance and more! \u003cbr\u003e\u003cbr\u003eThe new V2 Dragy uses high speed GPS satellites to accurately measure your vehicles performance within 1\/100th of a second. The Dragy software automatically charts slope on all timeslips which you can then post to forums or social media, share with friends, or even upload to the Dragy leader board. The Dragy box is extremely compact at 1\" x 3\" (25.4mm x 76.2mm) and can be set on the dash when testing and stored in the glove box or center console when not in use.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eSo accurate, it's like being on the track...\u003c\/span\u003e\u003cbr\u003eRace precision timing without the pain. Test your car anwhere without the queues ensuring consistently repeatable times when it really matters!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eBe the best!\u003c\/span\u003e\u003cbr\u003eWith the data you've gathered, refine your performance and take the top spot on the Dragy online leaderboard! And win local races.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003ePlan mods better...\u003c\/span\u003e\u003cbr\u003eWith accurate data for a fraction of the cost of going to the track, you can spend some of that hard earned cash on better mods for your car! Giving you a greater edge against your competition!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003ePurchase Includes:\u003c\/span\u003e\u003cbr\u003e(1) Dragy\u003cbr\u003e(1) Charging Cable\u003cbr\u003e(2) Magnetic Mounting Plates\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eQuick Specs:\u003c\/span\u003e\u003cbr\u003e• Battery life up to 20+ hours\u003cbr\u003e• Dimensions 30 x 80 x 15mm\u003cbr\u003e• Bluetooth 5.0\u003cbr\u003e• IOS \u0026amp; Android Compatible\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNotes:\u003c\/span\u003e\u003cbr\u003eV2 (DRG70-C) replaces the original DRG69.\u003cbr\u003e\u003cbr\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/iKwrVEHDkZk?si=qdYNXCdyahNXZ8cv\" height=\"563\" width=\"1000\" allowfullscreen=\"\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e","brand":"Dragy","offers":[{"title":"Default Title","offer_id":50563399844182,"sku":"DRG-DRG70-C","price":162.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/DRG70-C-dragy-v2-1.jpg?v=1749211712"},{"product_id":"unitronic-stage-1-ecu-stage-2-dsg-combo-2-5tfsi-evo","title":"Unitronic Stage 1+ ECU \u0026 Stage 2 DSG Combo (2.5TFSI EVO)","description":"\u003cp\u003e\u003cspan\u003e\u003cspan color=\"#ff0000\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cbr\u003e\u003cbr\u003eNote:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003eTo install your Unitronic Tune you must either go to an authorized dealer or purchase the Uniconnect+ cable\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"2d2d2d\" height=\"20\"\u003e\n\u003ctd\u003eSart Year\u003c\/td\u003e\n\u003ctd\u003eEnd Year\u003c\/td\u003e\n\u003ctd\u003eMake\u003c\/td\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSubmodel\u003c\/td\u003e\n\u003ctd\u003eCyl\u003c\/td\u003e\n\u003ctd\u003eLit\u003c\/td\u003e\n\u003ctd\u003eFuel\u003c\/td\u003e\n\u003ctd\u003eASP\u003c\/td\u003e\n\u003ctd\u003eEngDesg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eRS3\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eL5\u003c\/td\u003e\n\u003ctd\u003e2.5\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eTT Quatro\u003c\/td\u003e\n\u003ctd\u003eRS\u003c\/td\u003e\n\u003ctd\u003eL5\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003cbr\u003eDescription:\u003c\/span\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eStage 1+ ECU Upgrade\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003ePerformance Software Precisely Engineered for a completely stock car. \u003cstrong\u003ePerformance Software for your ECU Box Code is subject to availability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGas Type\u003cbr\u003e\u003c\/strong\u003e93 Octane \/ 98 Ron gas\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eFlashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniCONNECT+\u003c\/strong\u003e\u003cbr\u003eThis vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eStage 2 DSG Upgrade:\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eDSG Software Precisely Engineered to run combined with a Unitronic Stage 1+ and up ECU Performance Software. \u003cstrong\u003ePerformance Software for your TCU Box Code is subject to availability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eFlashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes). (In some rare cases it may require a little more time.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniconnect+\u003c\/strong\u003e\u003cbr\u003eThis vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eFeatures:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cu\u003eEnd-User Programmable with UniCONNECT+\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003eFlash your TCU from the comfort of your own home or garage. Within minutes (approximately 70-seconds to be exact on this platform), you'll be enjoying an entirely transformed driving experience.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cu\u003eOptimized D \u0026amp; Sport Modes\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003eD-mode is optimized for everyday daily driving and economy, while S-mode is optimized for faster acceleration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cu\u003eDual Setpoint Adjustable Launch Control\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003eUnitronic has adjusted the launch control RPM setpoints to allow for quicker acceleration off the launch control. Dual-stage launch control allows users to choose between two different launch control RPM setpoints based on the current conditions observed. (surface conditions, tires, etc.) Launch Control Setpoint 1 is activated at 100% pedal position, without engaging the kick-down switch. Launch Control Setpoint 2 is activated at \"110%\" pedal position. (100% pedal position with the kick-down switch engaged)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cu\u003eQuicker Gear Shifts\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003eUnitronic's TCU Performance Software calibration enhances the gear shift speeds making them up to 70% quicker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e Performance Gains:\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cp\u003e\u003cstrong\u003e+105HP \/ +142TQ\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eDyno Charts\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e Product Features:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered with Strict Industry Standards\u003c\/li\u003e\n\u003cli\u003eExtensively Tested Under Various Driving Conditions\u003c\/li\u003e\n\u003cli\u003eFactory Safety Limiters Retained\u003c\/li\u003e\n\u003cli\u003eOptimized Responsiveness, Smoothness, Drivability, and Comfort\u003c\/li\u003e\n\u003cli\u003eOptimized Maximum Output\u003c\/li\u003e\n\u003cli\u003ePower Delivery Perfectly Optimized Throughout the Power Band\u003c\/li\u003e\n\u003cli\u003eImproved Fuel Efficiency\u003c\/li\u003e\n\u003cli\u003eIgnition Timing Precisely Calibrated for Higher Octane Fuel\u003c\/li\u003e\n\u003cli\u003eSpeed Governor Removed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"product__details__section__title\"\u003e\u003cspan\u003e\u003cspan style=\"color: #ff0000;\"\u003eWarranty:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e15-Day Satisfaction Guarantee\u003c\/p\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cp\u003eUnitronic stands behind its Performance Software \u0026amp; Hardware to deliver its Clients with the performance, quality, and reliability the brand has been established on. Unitronic offers a hassle free, no questions asked 15-day Satisfaction Guarantee on its Performance Software.\u003c\/p\u003e\n\u003cp\u003eUnitronic's goal is to enhance your vehicle’s performance, while ensuring the advertised power figures are met. Their risk-free guarantee exists to bring you peace of mind, so rest assured that Unitronic will go the extra mile for you, every time. To take advantage of our 15-Day Satisfaction Guarantee, simply contact us at sales@streettunedmotorsports.com.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"No Thank You","offer_id":50563465380182,"sku":"UNI-110714","price":1664.05,"currency_code":"USD","in_stock":true},{"title":"UniConnect+ [+$149.99]","offer_id":50563465412950,"sku":"STM-KIT-UNI-110714-108574","price":1814.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/stage_1_plus_ecu_stage_2_DSG.jpg?v=1749212076"},{"product_id":"unitronic-stage-1-ecu-stage-1-dsg-combo-2-5tfsi-evo-1","title":"Unitronic Stage 1+ ECU \u0026 Stage 1 DSG Combo (2.5TFSI EVO)","description":"\u003cp\u003e\u003cspan\u003e\u003cspan color=\"#ff0000\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cbr\u003e\u003cbr\u003eNote:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003eTo install your Unitronic Tune you must either go to an authorized dealer or purchase the Uniconnect+ cable\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"2d2d2d\" height=\"20\"\u003e\n\u003ctd\u003eSart Year\u003c\/td\u003e\n\u003ctd\u003eEnd Year\u003c\/td\u003e\n\u003ctd\u003eMake\u003c\/td\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSubmodel\u003c\/td\u003e\n\u003ctd\u003eCyl\u003c\/td\u003e\n\u003ctd\u003eLit\u003c\/td\u003e\n\u003ctd\u003eFuel\u003c\/td\u003e\n\u003ctd\u003eASP\u003c\/td\u003e\n\u003ctd\u003eEngDesg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eRS3\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eL5\u003c\/td\u003e\n\u003ctd\u003e2.5\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eTT Quatro\u003c\/td\u003e\n\u003ctd\u003eRS\u003c\/td\u003e\n\u003ctd\u003eL5\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cbr\u003eDescription:\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eStage 1+ ECU Upgrade:\u003c\/span\u003e\u003cbr\u003ePerformance Software Precisely Engineered for a completely stock car. \u003cstrong\u003ePerformance Software for your ECU Box Code is subject to availability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGas Type\u003cbr\u003e\u003c\/strong\u003e93 Octane \/ 98 Ron gas\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eFlashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniCONNECT+\u003c\/strong\u003e\u003cbr\u003eThis vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eStage 1 DSG Upgrade:\u003cbr\u003e\u003c\/span\u003eDSG Software Precisely Engineered to run combined with a Unitronic Stage 1 or 1+ performance software. \u003cstrong\u003ePerformance Software for your TCU Box Code is subject to availability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eFlashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes). (In some rare cases it may require a little more time.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniconnect+\u003c\/strong\u003e\u003cbr\u003eThis vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePerformance Gains:\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cp\u003e\u003cstrong\u003e+105HP \/ +142TQ\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eDyno Charts\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e Product Features:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered with Strict Industry Standards\u003c\/li\u003e\n\u003cli\u003eExtensively Tested Under Various Driving Conditions\u003c\/li\u003e\n\u003cli\u003eFactory Safety Limiters Retained\u003c\/li\u003e\n\u003cli\u003eOptimized Responsiveness, Smoothness, Drivability, and Comfort\u003c\/li\u003e\n\u003cli\u003eOptimized Maximum Output\u003c\/li\u003e\n\u003cli\u003ePower Delivery Perfectly Optimized Throughout the Power Band\u003c\/li\u003e\n\u003cli\u003eImproved Fuel Efficiency\u003c\/li\u003e\n\u003cli\u003eIgnition Timing Precisely Calibrated for Higher Octane Fuel\u003c\/li\u003e\n\u003cli\u003eSpeed Governor Removed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"product__details__section__title\"\u003e\u003cspan\u003e\u003cspan style=\"color: #ff0000;\"\u003eWarranty:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e15-Day Satisfaction Guarantee\u003c\/p\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cp\u003eUnitronic stands behind its Performance Software \u0026amp; Hardware to deliver its Clients with the performance, quality, and reliability the brand has been established on. Unitronic offers a hassle free, no questions asked 15-day Satisfaction Guarantee on its Performance Software.\u003c\/p\u003e\n\u003cp\u003eUnitronic's goal is to enhance your vehicle’s performance, while ensuring the advertised power figures are met. Their risk-free guarantee exists to bring you peace of mind, so rest assured that Unitronic will go the extra mile for you, every time. To take advantage of our 15-Day Satisfaction Guarantee, simply contact us at sales@streettunedmotorsports.com.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"No Thank You","offer_id":50563465838934,"sku":"UNI-110713","price":1514.05,"currency_code":"USD","in_stock":true},{"title":"UniConnect+ [+$149.99]","offer_id":50563465871702,"sku":"STM-KIT-UNI-110713-108574","price":1664.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/stage_1_package_7a4c47d9-efd4-4d87-bebb-edee303eff6b.jpg?v=1749212083"},{"product_id":"unitronic-stage-1-ecu-stage-1-dsg-combo-2-5tfsi-evo","title":"Unitronic Stage 1 ECU \u0026 Stage 1 DSG Combo (2.5TFSI EVO)","description":"\u003cp\u003e\u003cspan\u003e\u003cspan color=\"#ff0000\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cbr\u003e\u003cbr\u003eNote:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003eTo install your Unitronic Tune you must either go to an authorized dealer or purchase the Uniconnect+ cable\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"2d2d2d\" height=\"20\"\u003e\n\u003ctd\u003eSart Year\u003c\/td\u003e\n\u003ctd\u003eEnd Year\u003c\/td\u003e\n\u003ctd\u003eMake\u003c\/td\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSubmodel\u003c\/td\u003e\n\u003ctd\u003eCyl\u003c\/td\u003e\n\u003ctd\u003eLit\u003c\/td\u003e\n\u003ctd\u003eFuel\u003c\/td\u003e\n\u003ctd\u003eASP\u003c\/td\u003e\n\u003ctd\u003eEngDesg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eRS3\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eL5\u003c\/td\u003e\n\u003ctd\u003e2.5\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eTT Quatro\u003c\/td\u003e\n\u003ctd\u003eRS\u003c\/td\u003e\n\u003ctd\u003eL5\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eDescription:\u003c\/span\u003e\u003cbr\u003e\n\u003ch3\u003eStage 1 ECU Upgrade\u003c\/h3\u003e\n\u003cp\u003ePerformance Software Precisely Engineered for a completely stock car. \u003cstrong\u003ePerformance Software for your ECU Box Code is subject to availability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGas type\u003c\/strong\u003e\u003cbr\u003e91 Octane \/ 95 Ron gas\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eFlashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes). (In some rare cases it may require a little more time.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniconnect+\u003c\/strong\u003e\u003cbr\u003eThis vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003ePerformance Gains:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e+76HP \/ +115TQ\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eDyno Charts:\u003cbr\u003e\u003cbr\u003eProduct Features:\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered with Strict Industry Standards\u003c\/li\u003e\n\u003cli\u003eExtensively Tested Under Various Driving Conditions\u003c\/li\u003e\n\u003cli\u003eFactory Safety Limiters Retained\u003c\/li\u003e\n\u003cli\u003eOptimized Responsiveness, Smoothness, Drivability, and Comfort\u003c\/li\u003e\n\u003cli\u003eOptimized Maximum Output\u003c\/li\u003e\n\u003cli\u003ePower Delivery Perfectly Optimized Throughout the Power Band\u003c\/li\u003e\n\u003cli\u003eImproved Fuel Efficiency\u003c\/li\u003e\n\u003cli\u003eIgnition Timing Precisely Calibrated for Higher Octane Fuel\u003c\/li\u003e\n\u003cli\u003eSpeed Governor Removed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"product__details__section__title\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eWarranty:\u003c\/span\u003e\u003cbr\u003e15-Day Satisfaction Guarantee\u003c\/p\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cdiv class=\"performanceSoftwareExtraInfoBlockInfo area_plus_6\"\u003e\n\u003cp\u003eUnitronic stands behind its Performance Software \u0026amp; Hardware to deliver its Clients with the performance, quality, and reliability the brand has been established on. Unitronic offers a hassle free, no questions asked 15-day Satisfaction Guarantee on its Performance Software.\u003c\/p\u003e\n\u003cp\u003eUnitronic's goal is to enhance your vehicle’s performance, while ensuring the advertised power figures are met. Their risk-free guarantee exists to bring you peace of mind, so rest assured that Unitronic will go the extra mile for you, every time. To take advantage of our 15-Day Satisfaction Guarantee, simply contact us at support@moddedeuros.com.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Unitronic","offers":[{"title":"No Thank You","offer_id":50563466166614,"sku":"UNI-110712","price":1464.05,"currency_code":"USD","in_stock":true},{"title":"UniConnect+ [+$149.99]","offer_id":50563466199382,"sku":"STM-KIT-UNI-110712-108574","price":1614.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/stage_1_package_81e19731-602c-4553-98d2-793a07fa8640.jpg?v=1749212085"},{"product_id":"unitronic-stage-1-ecu-tune-upgrade-for-stage-1-2-5tfsi-evo","title":"Unitronic Stage 1+ ECU Tune - Upgrade For Stage 1 (2.5TFSI EVO)","description":"\u003cp\u003e\u003cspan\u003e\u003cspan color=\"#ff0000\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003eTo install your Unitronic Tune you must either go to an authorized dealer or purchase the Uniconnect+ cable\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e2017-2018 Audi RS3 \u003c\/p\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"2d2d2d\" height=\"20\"\u003e\n\u003ctd\u003eSart Year\u003c\/td\u003e\n\u003ctd\u003eEnd Year\u003c\/td\u003e\n\u003ctd\u003eMake\u003c\/td\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSubmodel\u003c\/td\u003e\n\u003ctd\u003eCyl\u003c\/td\u003e\n\u003ctd\u003eLit\u003c\/td\u003e\n\u003ctd\u003eFuel\u003c\/td\u003e\n\u003ctd\u003eASP\u003c\/td\u003e\n\u003ctd\u003eEngDesg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eRS3\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eL5\u003c\/td\u003e\n\u003ctd\u003e2.5\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eTT Quatro\u003c\/td\u003e\n\u003ctd\u003eRS\u003c\/td\u003e\n\u003ctd\u003eL5\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eDescription:\u003cbr\u003e\u003c\/span\u003ePerformance Software Precisely Engineered for a completely stock car. \u003cstrong\u003ePerformance Software for your ECU Box Code is subject to availability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cp\u003e\u003cstrong\u003eGas Type\u003cbr\u003e\u003c\/strong\u003e93 Octane \/ 98 Ron gas\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eFlashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniCONNECT+\u003c\/strong\u003e\u003cbr\u003eThis vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePerformance Gains\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e+105HP \/ +142TQ\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eDyno Charts\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eProduct Features:\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered with Strict Industry Standards\u003c\/li\u003e\n\u003cli\u003eExtensively Tested Under Various Driving Conditions\u003c\/li\u003e\n\u003cli\u003eFactory Safety Limiters Retained\u003c\/li\u003e\n\u003cli\u003eOptimized Responsiveness, Smoothness, Drivability, and Comfort\u003cbr\u003eOptimized Maximum Output\u003c\/li\u003e\n\u003cli\u003ePower Delivery Perfectly Optimized Throughout the Power Band\u003c\/li\u003e\n\u003cli\u003eImproved Fuel Efficiency\u003c\/li\u003e\n\u003cli\u003eIgnition Timing Precisely Calibrated for Higher Octane Fuel\u003c\/li\u003e\n\u003cli\u003eSpeed Governor Removed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eWarranty:\u003c\/span\u003e\u003cbr\u003e15-Day Satisfaction Guarantee\u003c\/p\u003e\n\u003cp\u003eUnitronic stands behind its Performance Software \u0026amp; Hardware to deliver its Clients with the performance, quality, and reliability the brand has been established on. Unitronic offers a hassle free, no questions asked 15-day Satisfaction Guarantee on its Performance Software.\u003c\/p\u003e\n\u003cp\u003eUnitronic's goal is to enhance your vehicle’s performance, while ensuring the advertised power figures are met. Their risk-free guarantee exists to bring you peace of mind, so rest assured that Unitronic will go the extra mile for you, every time. To take advantage of our 15-Day Satisfaction Guarantee, simply contact us at sales@streettunedmotorsports.com.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSave $150, click \u003c\/span\u003e\u003ca href=\"https:\/\/stmtuned.com\/collections\/new-products-added\/products\/unitronic-stage-1-ecu-stage-1-dsg-combo-2-5tfsi-evo-1\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHERE\u003c\/a\u003e\u003cspan\u003e to bundle your Stage 1+ ECU and Stage 1 DSG Tune! \u003cbr\u003e Save $150, click \u003ca href=\"https:\/\/stmtuned.com\/collections\/new-products-added\/products\/unitronic-stage-1-ecu-stage-2-dsg-combo-2-5tfsi-evo\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHERE\u003c\/a\u003e to bundle your Stage 1+ ECU and Stage 2 DSG Tune! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Unitronic","offers":[{"title":"No \/ No Thank You","offer_id":50563466232150,"sku":"UNI-110101","price":964.05,"currency_code":"USD","in_stock":true},{"title":"No \/ UniConnect+ [+$149.99]","offer_id":50563466264918,"sku":"STM-KIT-UNI-110101-108574","price":1114.04,"currency_code":"USD","in_stock":true},{"title":"Yes Stage 1 (Verification Required) \/ No Thank You","offer_id":50563466297686,"sku":"UNI-110101","price":964.05,"currency_code":"USD","in_stock":true},{"title":"Yes Stage 1 (Verification Required) \/ UniConnect+ [+$149.99]","offer_id":50563466330454,"sku":"STM-KIT-UNI-110101-108574","price":264.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/stage_1_ECU_f20ae472-15f5-4ab3-a737-8e37ad0c632f.jpg?v=1749212088"},{"product_id":"unitronic-stage-1-ecu-tune-2-5tfsi-evo","title":"Unitronic Stage 1 ECU Tune (2.5TFSI EVO)","description":"\u003cp\u003e\u003cspan\u003e\u003cspan color=\"#ff0000\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003eTo install your Unitronic Tune you must either go to an authorized dealer or purchase the Uniconnect+ cable\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e2017-2018 Audi RS3 \u003c\/p\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"2d2d2d\" height=\"20\"\u003e\n\u003ctd\u003eSart Year\u003c\/td\u003e\n\u003ctd\u003eEnd Year\u003c\/td\u003e\n\u003ctd\u003eMake\u003c\/td\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSubmodel\u003c\/td\u003e\n\u003ctd\u003eCyl\u003c\/td\u003e\n\u003ctd\u003eLit\u003c\/td\u003e\n\u003ctd\u003eFuel\u003c\/td\u003e\n\u003ctd\u003eASP\u003c\/td\u003e\n\u003ctd\u003eEngDesg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eRS3\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eL5\u003c\/td\u003e\n\u003ctd\u003e2.5\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eTT Quatro\u003c\/td\u003e\n\u003ctd\u003eRS\u003c\/td\u003e\n\u003ctd\u003eL5\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003cbr\u003eDescription:\u003c\/span\u003e\u003cbr\u003e\n\u003cp class=\"product__details__section__title\"\u003ePerformance Software Precisely Engineered for a completely stock car. Performance Software for your ECU Box Code is subject to availability.\u003c\/p\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cp\u003e\u003cstrong\u003eGas Type\u003cbr\u003e\u003c\/strong\u003e91 Octane \/ 95 Ron gas\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eFlashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniCONNECT+\u003c\/strong\u003e\u003cbr\u003eThis vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e Performance Gains:\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cp\u003e\u003cstrong\u003e+76HP \/ +115TQ\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eDyno Charts\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e Product Features:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered with Strict Industry Standards\u003c\/li\u003e\n\u003cli\u003eExtensively Tested Under Various Driving Conditions\u003c\/li\u003e\n\u003cli\u003eFactory Safety Limiters Retained\u003c\/li\u003e\n\u003cli\u003eOptimized Responsiveness, Smoothness, Drivability, and Comfort\u003c\/li\u003e\n\u003cli\u003eOptimized Maximum Output\u003c\/li\u003e\n\u003cli\u003ePower Delivery Perfectly Optimized Throughout the Power Band\u003c\/li\u003e\n\u003cli\u003eImproved Fuel Efficiency\u003c\/li\u003e\n\u003cli\u003eIgnition Timing Precisely Calibrated for Higher Octane Fuel\u003c\/li\u003e\n\u003cli\u003eSpeed Governor Removed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"product__details__section__title\"\u003e\u003cspan\u003e\u003cspan style=\"color: #ff0000;\"\u003eWarranty:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e15-Day Satisfaction Guarantee\u003c\/p\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cp\u003eUnitronic stands behind its Performance Software \u0026amp; Hardware to deliver its Clients with the performance, quality, and reliability the brand has been established on. Unitronic offers a hassle free, no questions asked 15-day Satisfaction Guarantee on its Performance Software.\u003c\/p\u003e\n\u003cp\u003eUnitronic's goal is to enhance your vehicle’s performance, while ensuring the advertised power figures are met. Their risk-free guarantee exists to bring you peace of mind, so rest assured that Unitronic will go the extra mile for you, every time. To take advantage of our 15-Day Satisfaction Guarantee, simply contact us at sales@streettunedmotorsports.com.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eSave $150, click \u003ca href=\"https:\/\/stmtuned.com\/collections\/new-products-added\/products\/unitronic-stage-1-ecu-stage-1-dsg-combo-2-5tfsi-evo\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHERE\u003c\/a\u003e to bundle your Stage 1 ECU and DSG Tune! \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e \u003ca href=\"https:\/\/stmtuned.com\/collections\/new-products-added\/products\/unitronic-stage-1-ecu-stage-1-dsg-combo-2-5tfsi-evo\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"No Thank You","offer_id":50563466363222,"sku":"Uni-110100","price":914.05,"currency_code":"USD","in_stock":true},{"title":"UniConnect+ [+$149.99]","offer_id":50563466395990,"sku":"STM-KIT-UNI-110100-108574","price":1064.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/STAGE_1_ECU.jpg?v=1749212088"},{"product_id":"unitronic-stage-2-ecu-tune-2-0-tsi-ea888-gen-3-mqb","title":"Unitronic Stage 2 ECU Tune (2.0 TSI EA888 Gen 3 MQB)","description":"\u003cspan style=\"color: #ff0000;\"\u003e \u003cspan\u003e\u003cspan color=\"#ff0000\"\u003eNote:\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003eTo install your Unitronic Tune you must either go to an authorized dealer or purchase the Uniconnect+ cable\u003cspan style=\"color: #ff0000;\"\u003e\u003cbr\u003e\u003cbr\u003eVehicle Fitment:\u003c\/span\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"2d2d2d\" height=\"20\"\u003e\n\u003ctd\u003eSart Year\u003c\/td\u003e\n\u003ctd\u003eEnd Year\u003c\/td\u003e\n\u003ctd\u003eMake\u003c\/td\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSubmodel\u003c\/td\u003e\n\u003ctd\u003eCyl\u003c\/td\u003e\n\u003ctd\u003eLit\u003c\/td\u003e\n\u003ctd\u003eFuel\u003c\/td\u003e\n\u003ctd\u003eASP\u003c\/td\u003e\n\u003ctd\u003eEngDesg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA3 Quattro\u003c\/td\u003e\n\u003ctd\u003eCabriolet Premium Cabriolet PREMIUM Plus Cabriolet Prestige Premium Premium Plus PRESTIGE\u003c\/td\u003e\n\u003ctd\u003eL4\u003c\/td\u003e\n\u003ctd\u003e2.0\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS3\u003c\/td\u003e\n\u003ctd\u003ePremium Plus Prestige\u003c\/td\u003e\n\u003ctd\u003eL4\u003c\/td\u003e\n\u003ctd\u003e2.0\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eTT \u003cspan\u003eQuattro\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003eBase Coupe Roadster S\u003c\/td\u003e\n\u003ctd\u003eL4\u003c\/td\u003e\n\u003ctd\u003e2.0\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eVolkswagen\u003c\/td\u003e\n\u003ctd\u003eGolf\u003c\/td\u003e\n\u003ctd\u003eR\u003c\/td\u003e\n\u003ctd\u003eL4\u003c\/td\u003e\n\u003ctd\u003e2.0\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eVolkswagen\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003eGTI\u003c\/td\u003e\n\u003ctd\u003eAutobahn S SE Sport\u003c\/td\u003e\n\u003ctd\u003eL4\u003c\/td\u003e\n\u003ctd\u003e2.0\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"product__details__section__title\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eDescription:\u003c\/span\u003e\u003cbr\u003ePerformance Software Precisely Engineered for use with an upgraded exhaust system.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMay not be available for all ECU IDs. Specifically, many 2016+ models.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cp\u003e\u003cstrong\u003eGas type\u003cbr\u003e\u003c\/strong\u003e93 Octane \/ 98 Ron gas\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eFlashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes). (In some rare cases it may require a little more time.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniconnect+\u003c\/strong\u003e\u003cbr\u003eThis vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePerformance Gains\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMK7 GTI:\u003c\/strong\u003e +127HP \/ +112TQ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMK7 Golf R:\u003c\/strong\u003e +105HP \/ +88TQ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8V A3 Quattro:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e+117HP \/ +112TQ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8V S3:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e+105HP \/ +88TQ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"product__details__section product__details__features\"\u003e\n\u003cp class=\"product__details__section__title\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eRequired hardware:\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product__details__section product__details__warranty\"\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cdiv class=\"performanceSoftwareExtraInfoBlockInfo area_plus_6\"\u003e\n\u003cdiv class=\"powerfigureDetailInfoBox\"\u003e\n\u003cdiv class=\"powerfigureDetailInfoBoxListWrapper\"\u003e\n\u003cul\u003e\n\u003cli\u003eAftermarket High Flow Downpipe for 1.8\/2.0 TSI Gen3 MQB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"powerfigureDetailInfoBox\"\u003e\n\u003cdiv class=\"powerfigureDetailInfoBoxListWrapper\"\u003e\n\u003cp class=\"header3\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eRecommended hardware:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntake System for 1.8\/2.0 TSI Gen3 MQB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eDyno Graphs\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e2.0 TSI Gen3 MQB\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product__details__section product__details__features\"\u003e\n\u003cp class=\"product__details__section__title\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eProduct Features:\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced Torque Management by Gear (For maximum acceleration)\u003c\/li\u003e\n\u003cli\u003eEngine Temperature Protection (Rev Limit based on Engine Coolant Temperature)\u003c\/li\u003e\n\u003cli\u003eOptimized Responsiveness and Drivability\u003c\/li\u003e\n\u003cli\u003eOptimized Smoothness and Driving Comfort\u003c\/li\u003e\n\u003cli\u003ePower Delivery Perfectly Optimized Throughout the Power Band\u003c\/li\u003e\n\u003cli\u003eImproved Fuel Efficiency\u003c\/li\u003e\n\u003cli\u003eIgnition Timing Precisely Calibrated for Higher Octane Fuel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan style=\"color: #ff0000;\"\u003eWarranty:\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product__details__section product__details__warranty\"\u003e\n\u003cp class=\"product__details__section__title\"\u003e15-Day Satisfaction Guarantee\u003c\/p\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cdiv class=\"performanceSoftwareExtraInfoBlockInfo area_plus_6\"\u003e\n\u003cp\u003eUnitronic stands behind its Performance Software \u0026amp; Hardware to deliver its Clients with the performance, quality, and reliability the brand has been established on. Unitronic offers a hassle free, no questions asked 15-day Satisfaction Guarantee on its Performance Software.\u003c\/p\u003e\n\u003cp\u003eUnitronic's goal is to enhance your vehicle’s performance, while ensuring the advertised power figures are met. Their risk-free guarantee exists to bring you peace of mind, so rest assured that Unitronic will go the extra mile for you, every time. To take advantage of our 15-Day Satisfaction Guarantee, simply contact us at sales@streettunedmotorsports.com\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"No \/ No Thank You","offer_id":50563466723670,"sku":"UNI-108577","price":764.05,"currency_code":"USD","in_stock":true},{"title":"No \/ UniConnect+ [+$149.99]","offer_id":50563466756438,"sku":"STM-KIT-108577-108574","price":914.04,"currency_code":"USD","in_stock":true},{"title":"Yes Stage 1 (Verification Required) \/ No Thank You","offer_id":50563466789206,"sku":"UNI-108577-VERIFY","price":114.05,"currency_code":"USD","in_stock":true},{"title":"Yes Stage 1 (Verification Required) \/ UniConnect+ [+$149.99]","offer_id":50563466821974,"sku":"STM-KIT-108577-108574-VERIFY","price":314.04,"currency_code":"USD","in_stock":true},{"title":"Yes Stage 1+ (Verification Required) \/ No Thank You","offer_id":50563466854742,"sku":"UNI-108577-VERIFY","price":114.05,"currency_code":"USD","in_stock":true},{"title":"Yes Stage 1+ (Verification Required) \/ UniConnect+ [+$149.99]","offer_id":50563466887510,"sku":"STM-KIT-108577-VERIFY","price":264.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/STAGE_2_ECU.jpg?v=1749212098"},{"product_id":"unitronic-stage-2-dsg-tune-dq500-mqb","title":"Unitronic Stage 2 DSG Tune (DQ500 MQB)","description":"\u003cp\u003e\u003cspan\u003e\u003cspan color=\"#ff0000\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003eTo install your Unitronic Tune you must either go to an authorized dealer or purchase the Uniconnect+ cable\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e2017-2018 Audi RS3 \u003c\/p\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"2d2d2d\" height=\"20\"\u003e\n\u003ctd\u003eSart Year\u003c\/td\u003e\n\u003ctd\u003eEnd Year\u003c\/td\u003e\n\u003ctd\u003eMake\u003c\/td\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSubmodel\u003c\/td\u003e\n\u003ctd\u003eCyl\u003c\/td\u003e\n\u003ctd\u003eLit\u003c\/td\u003e\n\u003ctd\u003eFuel\u003c\/td\u003e\n\u003ctd\u003eASP\u003c\/td\u003e\n\u003ctd\u003eEngDesg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eRS3\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eL5\u003c\/td\u003e\n\u003ctd\u003e2.5\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eTT Quatro\u003c\/td\u003e\n\u003ctd\u003eRS\u003c\/td\u003e\n\u003ctd\u003eL5\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eDescription:\u003c\/span\u003e\u003cbr\u003eDSG Software Precisely Engineered to run combined with a Unitronic Stage 1+ and up ECU Performance Software. \u003cstrong\u003ePerformance Software for your TCU Box Code is subject to availability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eFlashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes). (In some rare cases it may require a little more time.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniconnect+\u003c\/strong\u003e\u003cbr\u003eThis vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage.\u003cspan\u003e \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"color: #ff0000;\"\u003eFeatures\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cu\u003eEnd-User Programmable with UniCONNECT+\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003eFlash your TCU from the comfort of your own home or garage. Within minutes (approximately 70-seconds to be exact on this platform), you'll be enjoying an entirely transformed driving experience.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cu\u003eOptimized D \u0026amp; Sport Modes\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003eD-mode is optimized for everyday daily driving and economy, while S-mode is optimized for faster acceleration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cu\u003eDual Setpoint Adjustable Launch Control\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003eUnitronic has adjusted the launch control RPM setpoints to allow for quicker acceleration off the launch control. Dual-stage launch control allows users to choose between two different launch control RPM setpoints based on the current conditions observed. (surface conditions, tires, etc.) Launch Control Setpoint 1 is activated at 100% pedal position, without engaging the kick-down switch. Launch Control Setpoint 2 is activated at \"110%\" pedal position. (100% pedal position with the kick-down switch engaged)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cu\u003eQuicker Gear Shifts\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003eUnitronic's TCU Performance Software calibration enhances the gear shift speeds making them up to 70% quicker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"product__details__section__title\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eWarranty:\u003c\/span\u003e\u003cbr\u003e15-Day Satisfaction Guarantee\u003c\/p\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cp\u003eUnitronic stands behind its Performance Software \u0026amp; Hardware to deliver its Clients with the performance, quality, and reliability the brand has been established on. Unitronic offers a hassle free, no questions asked 15-day Satisfaction Guarantee on its Performance Software.\u003c\/p\u003e\n\u003cp\u003eUnitronic's goal is to enhance your vehicle’s performance, while ensuring the advertised power figures are met. Their risk-free guarantee exists to bring you peace of mind, so rest assured that Unitronic will go the extra mile for you, every time. To take advantage of our 15-Day Satisfaction Guarantee, simply contact us at sales@streettunedmotorsports.com.\u003cbr\u003e\u003cbr\u003eSave $150, click \u003ca href=\"https:\/\/stmtuned.com\/collections\/new-products-added\/products\/unitronic-stage-1-ecu-stage-2-dsg-combo-2-5tfsi-evo\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHERE\u003c\/a\u003e to bundle your Stage 1+ ECU and Stage 2 DSG\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Unitronic","offers":[{"title":"No I don't have an ECU tune \/ No \/ No Thank You","offer_id":50563467149654,"sku":"UNI-110708","price":864.05,"currency_code":"USD","in_stock":true},{"title":"No I don't have an ECU tune \/ No \/ UniConnect+ [+$149.99]","offer_id":50563467182422,"sku":"STM-KIT-UNI-110708-108574","price":1014.04,"currency_code":"USD","in_stock":true},{"title":"No I don't have an ECU tune \/ Yes Stage 1 (Verification Required) \/ No Thank You","offer_id":50563467215190,"sku":"UNI-110708-VERIFY","price":764.05,"currency_code":"USD","in_stock":true},{"title":"No I don't have an ECU tune \/ Yes Stage 1 (Verification Required) \/ UniConnect+ [+$149.99]","offer_id":50563467247958,"sku":"STM-KIT-110708-108574-VERIFY","price":364.04,"currency_code":"USD","in_stock":true},{"title":"Yes I have an ECU tune (Verification Re \/ No \/ No Thank You","offer_id":50563467280726,"sku":"UNI-110708-VERIFY","price":764.05,"currency_code":"USD","in_stock":true},{"title":"Yes I have an ECU tune (Verification Re \/ No \/ UniConnect+ [+$149.99]","offer_id":50563467313494,"sku":"STM-KIT-110708-108574-VERIFY","price":914.04,"currency_code":"USD","in_stock":true},{"title":"Yes I have an ECU tune (Verification Re \/ Yes Stage 1 (Verification Required) \/ No Thank You","offer_id":50563467346262,"sku":"UNI-110708-VERIFY","price":764.05,"currency_code":"USD","in_stock":true},{"title":"Yes I have an ECU tune (Verification Re \/ Yes Stage 1 (Verification Required) \/ UniConnect+ [+$149.99]","offer_id":50563467379030,"sku":"STM-KIT-110708-108574-VERIFY","price":364.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/DSG_STAGE_2.jpg?v=1749212103"},{"product_id":"unitronic-uniconnect-programming-tool-2008","title":"Unitronic UniConnect+ Programming Tool (2008+)","description":"\u003cspan style=\"color: #ff0000;\"\u003eRequires Unitronic Software *SOLD SEPARATELY*\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eDescription:\u003c\/span\u003e\u003cbr\u003e\n\u003cp\u003eUniConnect+ offers consumers the ability to reflash their ECU (Engine Control Unit) or TCU (Transmission Control Unit) right from home. Gone are the days of having to drive to a shop to do this!\u003c\/p\u003e\n\u003cp\u003eNot only does this new device give you the ability to flash once, you can also upgrade your tunes or flash back to stock. Couple this with the added benefit of UniConnect+ being a diagnostic device it makes for a complete tuning solution for your Audi or Volkswagen.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eProduct Features:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlash Port (OBD-2 Port) Compatibility\u003c\/li\u003e\n\u003cli\u003eInstall your Unitronic ECU and\/or TCU Performance Software from the comfort of your garage\u003c\/li\u003e\n\u003cli\u003eAllows you to Read and Clear DTCs once you’ve resolved them\u003c\/li\u003e\n\u003cli\u003eSwitch between Performance Software Stages\u003c\/li\u003e\n\u003cli\u003eUpgrade your Performance Software on your own\u003c\/li\u003e\n\u003cli\u003eRevert ECU and TCU back to its stock calibration within minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"product__details__section__title\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eInstallation:\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cul\u003e\n\u003cli\u003eRegister your Uniconnect+ at: \u003ca href=\"https:\/\/www.getunitronic.com\/getuniconnect\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUniconnect+ Registration Page\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eOnce Registered, instructions are provided\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp class=\"product__details__section__title\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eWarranty:\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cdiv class=\"performanceSoftwareExtraInfoBlockWrapper\"\u003e\n\u003cdiv class=\"performanceSoftwareExtraInfoBlock\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eUnitronic Software Guarantee \u003cbr\u003e\u003c\/span\u003eUnitronic ECU software upgrades are designed to offer your vehicle the highest level of performance and reliability, and by offering a non-transferable lifetime limited warranty, we are setting the precedent even higher for the ECU tuning industry.\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performanceSoftwareExtraInfoBlockInfo area_plus_3\"\u003e\n\u003cbr\u003eThis warranty does not cover any ECU parts, any mechanical issues or defective components unrelated to software installation. Unitronic reserves the right to refuse any warranty claim if problems arise from improper installation, misuse, or abuse. Further, Unitronic reserves the right to inspect the ECU for evidence of tampering or misuse. If such is the case, the claim may be denied. If a manufacturer's ECU update overwrites the Performance Software, Unitronic and its dealers will happily reinstall it for you. In such a case, installation charges may apply and may vary between dealers.\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eFor more information please visit our website or contact our Head Office at 1-866-341-2447. Unitronic reserves the right to refuse any refund claims if the request is judged to be inappropriate or dishonest.\u003c\/div\u003e\n\u003cdiv class=\"performanceSoftwareExtraInfoBlockInfo area_plus_3\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"performanceSoftwareExtraInfoBlockInfo area_plus_3\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eUnitronic Software Warranty\u003cbr\u003e\u003c\/span\u003eUnitronic stands behind its Performance Software \u0026amp; Hardware to deliver its Clients with the performance, quality, and reliability the brand has been established on. Unitronic offers a hassle free, no questions asked 15-day Satisfaction Guarantee on its Performance Software and a Limited Lifetime Warranty to the original Client on its Performance Hardware.\u003c\/p\u003e\n\u003cp\u003eOur goal is to enhance your vehicle’s performance, while ensuring the advertised power figures are met. Our risk-free guarantee exists to bring you peace of mind, so rest assured that Unitronic will go the extra mile for you, every time. To take advantage of our 15-Day Satisfaction Guarantee, simply return to the Authorized Dealer for a reflash back to stock and a refund (less installation fees, labor, or taxes).\u003c\/p\u003e\n\u003cp\u003eWe are here to serve you and build on our solid reputation, one satisfied customer at a time. That’s why all original owners of Unitronic Performance Software benefit from this risk-free guarantee.\u003c\/p\u003e\n\u003cp\u003eUnitronic Performance Hardware products are backed by a limited-lifetime warranty to the original owner\/purchaser against manufacturer or craftsmanship defects. In the unfortunately circumstances that you must take advantage of this warranty coverage, proof of original purchase from Unitronic or an Authorized Unitronic Dealer must be provided. Some products require professional installation and therefore installation must be performed by a Unitronic Authorized Dealer or equally qualified professional VW\/Audi specialty workshop to qualify for warranty coverage. Please contact Unitronic for more details.\u003c\/p\u003e\n\u003cspan style=\"color: #ff0000;\"\u003eUnitronic Hardware Warranty\u003c\/span\u003e\n\u003cp\u003eUnitronic Performance Hardware Products carry a Limited Lifetime Warranty to the original retail purchaser (“consumer”) against manufacturing defects or craftsmanship flaw. Warranty only applicable on Unitronic Hardware purchased from Unitronic or an Authorized Unitronic Dealer or Distributor. Original proof of purchase required.\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eWarranty coverage may be excluded if installation was not performed by Unitronic, Unitronic Authorized Dealer or other certified VAG specialty mechanic, or if product was modified, installed improperly, or used in any way, not intended by the manufacturer. This warranty does not cover labor, consequential damage to vehicle or vehicle components, shipping costs, loss of use of vehicle, loss of time or revenues, or other incidental damage or loss of use.\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eProduct usage in Motorsports may result in denial of warranty claim, as operating conditions are inherently abusive in nature and fall outside of normal operating conditions. Upon verification and acceptance of warranty coverage by Unitronic, Unitronic will repair or replace the defective product. Unitronic reserves the right to accept or deny warranty coverage at their full discretion. Warranty claims must be submitted to Unitronic within 48 hours of product defect.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":50563467411798,"sku":"UNI-108574","price":179.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/uniconnect_cable.jpg?v=1749212100"},{"product_id":"unitronic-stage-1-dsg-tune-dq500-mqb","title":"Unitronic Stage 1 DSG Tune (DQ500 MQB)","description":"\u003cp\u003e\u003cspan\u003e\u003cspan color=\"#ff0000\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003eTo install your Unitronic Tune you must either go to an authorized dealer or purchase the Uniconnect+ cable\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e2017-2018 Audi RS3 \u003c\/p\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"2d2d2d\" height=\"20\"\u003e\n\u003ctd\u003eSart Year\u003c\/td\u003e\n\u003ctd\u003eEnd Year\u003c\/td\u003e\n\u003ctd\u003eMake\u003c\/td\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSubmodel\u003c\/td\u003e\n\u003ctd\u003eCyl\u003c\/td\u003e\n\u003ctd\u003eLit\u003c\/td\u003e\n\u003ctd\u003eFuel\u003c\/td\u003e\n\u003ctd\u003eASP\u003c\/td\u003e\n\u003ctd\u003eEngDesg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eRS3\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eL5\u003c\/td\u003e\n\u003ctd\u003e2.5\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"404040\"\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eTT Quatro\u003c\/td\u003e\n\u003ctd\u003eRS\u003c\/td\u003e\n\u003ctd\u003eL5\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eDescription:\u003c\/span\u003e\u003cbr\u003e\n\u003cp\u003eDSG Software Precisely Engineered to run combined with a Unitronic Stage 1 or 1+ performance software. \u003cstrong\u003ePerformance Software for your TCU Box Code is subject to availability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eFlashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes). (In some rare cases it may require a little more time.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniconnect+\u003c\/strong\u003e\u003cbr\u003eThis vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSave $150, click \u003c\/span\u003e\u003ca href=\"https:\/\/stmtuned.com\/collections\/new-products-added\/products\/unitronic-stage-1-ecu-stage-1-dsg-combo-2-5tfsi-evo\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHERE\u003c\/a\u003e\u003cspan\u003e to bundle your Stage 1 ECU and Stage 1 DSG Tune! \u003c\/span\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.moddedeuros.com\/products\/unitronic-uniconnect-programming-tool-uh008-tla\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Unitronic","offers":[{"title":"No I don't have an ECU tune \/ No Thank You","offer_id":50563467837782,"sku":"UNI-110707","price":714.05,"currency_code":"USD","in_stock":true},{"title":"No I don't have an ECU tune \/ UniConnect+ [+$149.99]","offer_id":50563467870550,"sku":"STM-KIT-UNI-110707-108574","price":864.04,"currency_code":"USD","in_stock":true},{"title":"Yes I have an ECU tune (Verification Required) \/ No Thank You","offer_id":50563467903318,"sku":"UNI-110707-VERIFY","price":614.05,"currency_code":"USD","in_stock":true},{"title":"Yes I have an ECU tune (Verification Required) \/ UniConnect+ [+$149.99]","offer_id":50563467936086,"sku":"STM-KIT-UNI-110707-108574-VERIFY","price":764.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/Unitronic_Tune.jpg?v=1749212110"},{"product_id":"unitronic-stage-1-performance-software-upgrade-for-audi-rs3-8v-2-5tfsi-evo","title":"Unitronic Performance Software Upgrade for Audi RS3 8V 2.5TFSI EVO","description":"\u003cdiv class=\"textTitle\"\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eStage 1:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e476 HP \/ 469 LB-TQ\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e( +76 HP \/ +115 LB-TQ \u003cbr\u003eFor 91 octane fuel\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eStage 1+\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e505 HP \/ 496 LB-TQ ( +105 HP \/ +142 LB-TQ )\u003cbr\u003eIgnition Timing Precisely Calibrated for 93 Octane Fuel\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cspan\u003eVehicle Firment:\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e2017-2018 Audi RS3 8V 2.5TFSI EVO\u003cspan style=\"color: #ff0000;\"\u003e\u003cbr\u003e\u003cbr\u003eDescription:\u003cbr\u003e\u003c\/span\u003ePerformance Software Precisely Engineered for a completely stock car.\u003cbr\u003e\u003cstrong\u003ePerformance Software for your ECU Box Code is subject to availability.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstallation\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eFlashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes).\u003cbr\u003e\u003cbr\u003e \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eUniCONNECT+\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThis vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eFeatures:\u003c\/span\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eEngineered with Strict Industry Standards\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eWith over 10 years of experience with Bosch and Siemens engine management systems and calibrations, Unitronic is able to utilize its expertise, industry leading tools and equipment to ensure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cu\u003eExtensively Tested Under Various Driving Conditions\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eDevelopment begins using Unitronic’s in-house Maha Chassis dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Beta calibrations are then tested in street and track scenarios, using multiple cars under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eFactory Safety Limiters Retained\u003cbr\u003e\u003c\/u\u003e\u003c\/b\u003eOEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in reliability.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cu\u003eOptimized Responsiveness, Smoothness, Drivability, and Comfort\u003cbr\u003e\u003c\/u\u003e\u003c\/b\u003eUnitronic’s ECU calibrations are engineered to improve engine response and reduce low-end lag. Unitronic’s Performance Software has gained worldwide recognition and is well known for its broad powerband, with smooth power delivery, maximizing responsiveness and “area under the curve”, under normal and hard acceleration.\u003cb\u003e\u003cu\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/b\u003e\u003cb\u003e\u003cu\u003e\u003cbr\u003eOptimized Maximum Output\u003cbr\u003e\u003c\/u\u003e\u003c\/b\u003eUnitronic’s ECU Calibrators deliver the maximum power output while staying within the operational limits of the factory engine and drivetrain components. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine and drivetrain components.\u003cb\u003e\u003cu\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/b\u003e\u003cb\u003e\u003cu\u003e\u003cbr\u003ePower Delivery Perfectly Optimized Throughout the Power Band\u003cbr\u003e\u003c\/u\u003e\u003c\/b\u003eAligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation.\u003cb\u003e\u003cu\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/b\u003e\u003cb\u003e\u003cu\u003e\u003cbr\u003eImproved Fuel Efficiency\u003cbr\u003e\u003c\/u\u003e\u003c\/b\u003eOptimized timing and injection in cruising condition allows for an improved fuel efficiency, under normalized driving conditions.\u003cb\u003e\u003cu\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/b\u003e\u003cb\u003e\u003cu\u003e\u003cbr\u003eIgnition Timing Precisely Calibrated for Higher Octane Fuel\u003cbr\u003e\u003c\/u\u003e\u003c\/b\u003eEngine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved.\u003cb\u003e\u003cu\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/b\u003e\u003cb\u003e\u003cu\u003e\u003cbr\u003eSpeed Governor Removed\u003cbr\u003e\u003c\/u\u003e\u003c\/b\u003eVehicle speed limiter within ECU is removed. (Subject to transmission rotational speed limit.)\u003cb\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eRecommended Hardware\u003cbr\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/stmtuned.com\/collections\/new-products-added\/products\/unitronic-3-inch-turbo-inlet-elbow-for-2-5tfsi-evo-ea855\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUnitronic 3-Inch Turbo Inlet Elbow for 2.5TFSI EVO (EA855)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Unitronic","offers":[{"title":"Stage 1","offer_id":50563481207126,"sku":"UNI-STAGE1","price":914.05,"currency_code":"USD","in_stock":true},{"title":"Stage 1+","offer_id":50563481239894,"sku":"UNI-STAGE1+","price":964.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/Unitronic_RS3_Software_Upgrade_Thumbnail.jpg?v=1749212246"},{"product_id":"sheridan-engineering-ecu-connector-set-for-2g-dsm-rear-latching","title":"Sheridan ECU Connector Set for 95-96 DSM Rear-Latching (CON-2GECU-R)","description":"The Sheridan Engineering ECU connector set is made by TYCO - the same company that supplies OEM connectors. For the 2G DSM, there are 4 connectors, a 12 pin, 16 pin, 22 pin, and 26 pin. The 12 and 16 pin connectors use a smaller terminal, while the 22 pin and 26 pin connectors use some small terminals, and some large terminals. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e1995-1996 2G DSM\u003cbr\u003eEclipse GST\/GSX \u0026amp; Talon TSi Turbo\u003cbr\u003e• Please confirm fitment first (read more below)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease Read ALL Info Before Purchase:\u003c\/span\u003e\u003cbr\u003eThere are 2 versions of the 2G ECU connector, and the terminals are not compatible between them. So it is important to get the terminals that match your connector. \u003cbr\u003e\u003cbr\u003eThere are also 2 sizes of the terminal inside the connector. There are some wider terminals, and some narrower terminals. These correspond to wider and narrower locations in the connector, so you have to make sure you use the correct size for the connector. \u003cbr\u003e\u003cbr\u003eEarly 2Gs came with a version of the connector with a rear folding latching piece that secures the terminals. Some Evos, and late 2Gs, came a version where the latch presses in from below. We don't have an exact split for which vehicles have the rear latch, vs which ones have the side latch. We have seen rear latching on 1995 and 1996, and side latching on 1997.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003ePictured:\u003c\/span\u003e\u003cbr\u003e Exact product is pictured, Sheridan CON-2GECU-R.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eDiscounts:\u003c\/span\u003e\u003cbr\u003e We are sorry, discounts are not available with Sheridan products.\u003cbr\u003e\u003cbr\u003e\u003ca style=\"color: #afafaf;\" href=\"https:\/\/stmtuned.com\/collections\/sheridan-engineering-products\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more Sheridan Engineering\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"Sheridan Engineering","offers":[{"title":"Default Title","offer_id":50563485598038,"sku":"SE-CON-2GECU-R","price":53.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/CON-2GECU-R-sheridan-ecu-connector-set-2g-dsm-1.jpg?v=1749212292"},{"product_id":"spoolinup-speed-density-harness-for-evo-8-9","title":"SpoolinUp Speed Density Harness for Evo 8\/9","description":"An easy way to convert to Speed Density is here! The 3.5 foot long harness is made with with a custom molded male MAF connector, high quality OEM connectors, teflon military grade wire and high temperature wire sheath.\u003cbr\u003e\u003cbr\u003e For a standard US market Evo, you just need the basic SD harness.\u003cbr\u003e\u003cbr\u003e\n\n\u003cspan style=\"color: #ff0000;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e 2003-2006 Mitsubishi Lancer Evolution VIII IX\u003cbr\u003e\u003cbr\u003e \n\n\n\u003cspan style=\"color: #ff0000;\"\u003eInstallation:\u003c\/span\u003e\u003cbr\u003e A few things will need to be done for the Basic SD Harness:\u003cbr\u003e1. Installation of the GM IAT sensor into the intake manifold.\u003cbr\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e• \"SD Option: IAT Input for MAT - Use 0x03, Fuel Temp ADC_0E for MAT - Use 0x0E\"\u003cbr\u003e • Default setting is 0x0E, you must change this.\u003cbr\u003e • IAT Scaling: Celsius - Fahrenheit\u003c\/div\u003e\n2. Installation of an aftermarket or JDM MAP Sensor.\u003cbr\u003e 3. Tephra v7 must be installed and tuned. This is no easy feat!\u003cbr\u003e \u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eIncludes:\u003c\/span\u003e\u003cbr\u003e (1) Harness\u003cbr\u003e\u003cbr\u003e\n\u003ca style=\"color: #afafaf;\" target=\"blank\" href=\"https:\/\/stmtuned.com\/collections\/spoolinup-products\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e\nSee more SpoolinUp Products\u003c\/span\u003e\u003c\/div\u003e\u003c\/a\u003e","brand":"SpoolinUp","offers":[{"title":"Default Title","offer_id":50563542286678,"sku":"SPU-SD-HARNESS","price":38.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/spoolinup-speed-density-harness-for-evo-8-9-1.jpg?v=1749212626"}],"url":"https:\/\/www.speed-addicts.com\/en\/collections\/engine-management.oembed","provider":"Speed Addicts","version":"1.0","type":"link"}