{"title":"EuroExport","description":"","products":[{"product_id":"euroexport-b16-b18-h22-valve-spring-compressor-tool","title":"EuroExport Valve Spring Compressor Tool for B16 B18 H22 VTEC (SC-30010)","description":"The EuroExport valve spring compressor tool for B18A\/B18B\/B20 Non-VTEC Honda\/Acura makes installing valve springs easy! Simply align the holes on the aluminum body of the valve spring compressor with the ones on the head, bolt it in, place the valve spring, retainer and retainer cap on the retainers, bolt down the long bolt, place the keepers using the magnetized screwdriver and it's done!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003eHonda\/Acura B16 B18 H22 (VTEC)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures:\u003c\/span\u003e\u003cbr\u003e• CNC machined 6061 anodized aluminum\u003cbr\u003e• Can be used with the head on the block\u003cbr\u003e• Will not slip and scratch or damage your head like universal clamp type valve spring compressors\u003cbr\u003e• No need to remove the rocker arm shafts\u003cbr\u003e• Included is a small magnetized screw driver to very easily remove or install the keeper\u003cbr\u003e• Made in the USA\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eIncludes:\u003c\/span\u003e\u003cbr\u003e• Billet Valve Spring Compressor Body\u003cbr\u003e• Magnetic Screwdriver\u003cbr\u003e• Long Main Bolt\u003cbr\u003e• Retainer Cap\u003cbr\u003e• Anchor Bolts and Hardware\u003cbr\u003e• Install Lube\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eInstall Tips:\u003c\/span\u003e\u003cbr\u003eIf using with the head on the block, cylinders need to be pressurized to 100PSI to prevent the valve from falling into the cylinder. If using with the head out of the engine compartment, put something below the valve to keep it pressed upward.\u003cbr\u003e\n\u003col\u003e\n\u003cli\u003eAlign the holes on the tool with the one the head, and place the shorter bolts and washers to secure the tool.\u003c\/li\u003e\n\u003cli\u003ePlace the retainer cap on top of the retainer, lubricate the long bolt with provided grease and start turning the long bolt clockwise with the help of a wrench (14mm) to apply pressure to the retainer cap and compress the valve spring until the keepers are completely visible and can come out.\u003c\/li\u003e\n\u003cli\u003eUsing the magnetized end of the screw driver remove the keepers.\u003c\/li\u003e\n\u003cli\u003eTo reinstall the valve assembly, place the valve (if removed for some reason), valve seals, valve spring, and retainer; compress the assembly using the same steps as above.\u003c\/li\u003e\n\u003cli\u003ePlace a small amount of the provided grease on the flat tip of the screw driver and place a keeper over it, the grease will hold the keeper in place and allow you to place the keepers easily.\u003c\/li\u003e\n\u003cli\u003eOnce keepers are in place, start turning the bolt counterclockwise to relieve the pressure of the valve spring.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ca href=\"https:\/\/stmtuned.com\/collections\/euroexport-products\" style=\"color: #afafaf;\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more EuroExport Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"EuroExport","offers":[{"title":"Default Title","offer_id":50562546237782,"sku":"EE-SC-30010","price":84.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/SC-30010-euroexport-b16-b18-h22-valve-spring-compressor-tool-1.jpg?v=1749202667"},{"product_id":"vs10009-valve-stem-seals-honda-acura","title":"EuroExport Valve Stem Seals for Honda\/Acura (VS10009)","description":"Valve stem seals by ASP All Spec Performance \u0026amp; EuroExport for Honda\/Acura models. Includes a full set of 16 for the B16, B17, B18C, D15, D16, D17, F20, H22, Civic, Integra and S2000. The seals feature a special smaller design to allow for clearance in small inside-diameter valve springs.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003eHonda\/Acura Civic, Integra, S2000\u003cbr\u003eB16, B17, B18C, D15, D16, D17, F20, H22\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eIncludes:\u003c\/span\u003e\u003cbr\u003e(8) Blue Exhaust Seals\u003cbr\u003e(8) Brown Intake Seals\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003ePart Number:\u003c\/span\u003e\u003cbr\u003eVS10009\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore Info:\u003c\/span\u003e\u003cbr\u003eViton seals, which use a proprietary fluoroelastomer material, are extremely resistant to heat, oil additives and abrasion. The metal body ensures the seals remain in place and deliver excellent long-term durability. Viton valve stem oil seals have gained quite a reputation for keeping oil in the proper places and out of your engine's combustion chambers.The seals feature a special smaller design to allow for clearance in small inside-diameter valve springs.\u003cbr\u003e\u003cbr\u003e\u003ca style=\"color: #afafaf;\" href=\"https:\/\/stmtuned.com\/collections\/euroexport-products\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e\nSee more EuroExport Products\u003c\/span\u003e\u003c\/div\u003e\u003c\/a\u003e","brand":"EuroExport","offers":[{"title":"Default Title","offer_id":50562875818326,"sku":"EE-VS10009","price":23.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/VS10009-valve-stem-seals-honda-acura-1.jpg?v=1749205938"},{"product_id":"t20261b-asp-turbo-oil-flange-t3-t4-npt","title":"EuroExport ASP T3\/T4 Turbo Drain with 1\/8\" Hole (T20261B)","description":"Billet turbo flange for T3 and T4 turbos has a threaded 1\/8\" NPT oil inlet. Made by ASP All Spec Performance, now EuroExport. Includes the flange, gasket and two stainless steel mounting bolts.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e• For T3\/T4 Turbo\u003cbr\u003e• Threaded 1\/8\" NPT\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eIncludes:\u003c\/span\u003e\u003cbr\u003e(1) Flange\u003cbr\u003e(1) Gasket\u003cbr\u003e(2) 8mm x 1.25 Stainless Bolts\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore Info:\u003c\/span\u003e\u003cbr\u003eThis oil feed flange is made from billet aluminum, with a bright-dip finish for better corrosion resistance and looks. It features a 1\/8\" threaded hole and is fitted with a restrictor plate with a 0.059\" hole that diminishes oil flow and prevent oil leaks in the turbo, which can lead to fires. Also features two mounting holes for the included 8mm x 1.25 stainless steel bolts, and a high temperature resistant gasket.\u003cbr\u003e\u003cbr\u003eDesigned for turbos which do not have threaded section for oil inlet and requires a flange or adapter. Fits TO3 and TO4 1\/8 NPT.Made in the USA. Kit comes complete with adapter plate\/flange, stainless steel bolts, and gasket for a leak proof installation.","brand":"EuroExport","offers":[{"title":"Default Title","offer_id":50562900525398,"sku":"EE-T20261B","price":19.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/T20261B-asp-turbo-oil-flange-t3-t4-npt-1.jpg?v=1749206296"},{"product_id":"t20261b-restri-asp-turbo-oil-flange-t3-t4-npt-restrictor","title":"EuroExport ASP T3\/T4 Turbo Drain with 1\/8\" .059\" Restricted Hole (T20261B-RESTRI)","description":"Billet turbo flange for T3 and T4 turbos has a threaded 1\/8\" NPT oil inlet with 0.059\" restricted hole. Made by ASP All Spec Performance, now EuroExport. Includes the flange, gasket and two stainless steel mounting bolts.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e• For T3\/T4 Turbo\u003cbr\u003e• Threaded 1\/8\" NPT\u003cbr\u003e• 0.059\" Restricted Hole\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eIncludes:\u003c\/span\u003e\u003cbr\u003e(1) Flange\u003cbr\u003e(1) Gasket\u003cbr\u003e(2) 8mm x 1.25 Stainless Bolts\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore Info:\u003c\/span\u003e\u003cbr\u003eThis oil feed flange is made from billet aluminum, with a bright-dip finish for better corrosion resistance and looks. It features a 1\/8\" threaded hole and is fitted with a restrictor plate with a 0.059\" hole that diminishes oil flow and prevent oil leaks in the turbo, which can lead to fires. Also features two mounting holes for the included 8mm x 1.25 stainless steel bolts, and a high temperature resistant gasket.\u003cbr\u003e\u003cbr\u003eDesigned for turbos which do not have threaded section for oil inlet and requires a flange or adapter. Fits TO3 and TO4 1\/8 NPT.Made in the USA. Kit comes complete with adapter plate\/flange, stainless steel bolts, and gasket for a leak proof installation.\u003ca style=\"color: #afafaf;\" href=\"https:\/\/stmtuned.com\/collections\/euroexport-products\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e\nSee more EuroExport Products\u003c\/span\u003e\u003c\/div\u003e\u003c\/a\u003e","brand":"EuroExport","offers":[{"title":"Default Title","offer_id":50562902950230,"sku":"EE-T20261B-RESTRI","price":19.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/T20261B-RESTRI-asp-turbo-oil-flange-t3-t4-npt-restrictor-1.jpg?v=1749206302"},{"product_id":"t20259b-asp-turbo-oil-flange-t3-t4-npt-12","title":"EuroExport ASP T3\/T4 Turbo Drain with 1\/2\" Hole (T20259B)","description":"Billet turbo oil drain flange for T3 and T4 turbos has a threaded 1\/2\" NPT oil inlet. Made by ASP All Spec Performance, now EuroExport. Includes the flange, gasket and two stainless steel mounting bolts.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e• For T3\/T4 Turbo\u003cbr\u003e• Threaded 1\/2\" NPT\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eIncludes:\u003c\/span\u003e\u003cbr\u003e(1) Flange\u003cbr\u003e(1) Gasket\u003cbr\u003e(2) 8mm x 1.25 Stainless Bolts\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eMore Info:\u003c\/span\u003e\u003cbr\u003eThis oil feed flange is made from billet aluminum that has a 1\/2\" threaded NPT hole. Also features two mounting holes for the included 8mm x 1.25 stainless steel bolts, and a high temperature resistant gasket.\u003cbr\u003e\u003cbr\u003eDesigned for turbos which do not have threaded section for oil inlet and requires a flange or adapter. Fits T03 and T04 turbo. Kit comes complete with adapter plate\/flange, stainless steel bolts, and gasket for a leak proof installation.\u003ca href=\"https:\/\/stmtuned.com\/collections\/euroexport-products\" style=\"color: #afafaf;\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more EuroExport Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"EuroExport","offers":[{"title":"Default Title","offer_id":50562902982998,"sku":"EE-T20259B","price":19.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/T20259B-asp-turbo-oil-flange-t3-t4-npt-12-1.jpg?v=1749206303"},{"product_id":"t12001-asp-35-38-external-wastegate-gasket","title":"EuroExport ASP 35\/38mm External Wastegate Gasket Kit (T12001)","description":"Stainless steel 35\/38mm external wastegate gasket that includes stainless steel washers and cooper-coated nuts for better heat resistance. Studs are 8mm x 1.25, and feature a stop so that are even and not over-tightened. Made by ASP All-Spec Performance in the USA.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003eUniversal Application\u003cbr\u003e\u003cbr\u003e \u003cspan style=\"color: #ff2a00;\"\u003eIncludes:\u003c\/span\u003e\u003cbr\u003e (1) Gasket\u003cbr\u003e (2) Studs\u003cbr\u003e (2) Nuts\u003cbr\u003e (2) Washers\u003cbr\u003e\u003cbr\u003e \u003ca style=\"color: #afafaf;\" href=\"https:\/\/stmtuned.com\/collections\/euroexport-products\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more EuroExport Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"EuroExport","offers":[{"title":"Default Title","offer_id":50563394208086,"sku":"EE-T12001","price":21.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/T12001-asp-35-38-external-wastegate-gasket-1.jpg?v=1749211652"},{"product_id":"tbi10001-euroexport-b16-b18-cam-lock-timing-tool","title":"EuroExport Cam Lock Timing Tool for B16 B18 VTEC (TBI10001)","description":"The EuroExport ASP cam gear lock for Honda\/Acura 1.6L B16, 1.8L B18C1 and B18C5 engines makes the job of replacing or setting up your new timing belt easy! Made from one piece CNC machined 6061-T6 aluminum, anodized red, and laser engraved. Features a hole to clear the plastic cover and a small window in the middle to check the timing marks.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003eHonda\/Acura B16\/B18\u003cbr\u003e1994-2001 Integra Type-R GSR 1.8L VTEC\u003cbr\u003e1994-1997 Civic Del Sol 1.6L VTEC\u003cbr\u003e1999-2000 Civic Si 1.6L VTEC\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eSpecs:\u003c\/span\u003e\u003cbr\u003e• CNC Machined 6061 Aluminum\u003cbr\u003e• Red Anodize\u003cbr\u003e• Made in the USA\u003cbr\u003e• Window to check timing marks\u003cbr\u003e• Hole to clear plastic cover\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003ePurchase Includes:\u003c\/span\u003e\u003cbr\u003e(1) Tool\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/stmtuned.com\/collections\/euroexport-products\" style=\"color: #afafaf;\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more EuroExport Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"EuroExport","offers":[{"title":"Default Title","offer_id":50565361500502,"sku":"EE-TBI10001","price":39.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/TBI10001-euroexport-b16-b18-cam-lock-timing-tool-1.jpg?v=1749225097"},{"product_id":"euroexport-k20-k24-f20c-f22c-compressor-tool","title":"EuroExport Valve Spring Compressor Tool for K20 K24 F20C F22C (SC-30015)","description":"The EuroExport valve spring compressor tool for K20, K24, F20C, F22C Honda\/Acura makes installing valve springs easy! Simply align the holes on the aluminum body of the valve spring compressor with the ones on the head, bolt it in, place the valve spring, retainer and retainer cap on the retainers, bolt down the long bolt, place the keepers using the magnetized screwdriver and it's done!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003eHonda\/Acura K20 K24 F20C F22C\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures:\u003c\/span\u003e\u003cbr\u003e• CNC machined 6061 anodized aluminum\u003cbr\u003e• Steel bolts, washers, and retainer cap\u003cbr\u003e• Can be used with the head on the block\u003cbr\u003e• Will not slip and scratch or damage your head like universal clamp type valve spring compressors\u003cbr\u003e• No need to remove the rocker arm shafts\u003cbr\u003e• Included is a small magnetized screw driver to very easily remove or install the keeper\u003cbr\u003e• Made in the USA\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eIncludes:\u003c\/span\u003e\u003cbr\u003e• Billet Valve Spring Compressor Body\u003cbr\u003e• Magnetic Screwdriver\u003cbr\u003e• Long Main Bolt\u003cbr\u003e• Retainer Cap\u003cbr\u003e• Anchor Bolts and Hardware\u003cbr\u003e• Install Lube\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eInstall Tips:\u003c\/span\u003e\u003cbr\u003eIf using with the head on the block, cylinders need to be pressurized to 100PSI to prevent the valve from falling into the cylinder. If using with the head out of the engine compartment, put something bellow the valve to keep it pressed upward.\u003cbr\u003e\n\u003col\u003e\n\u003cli\u003eAlign the holes on the tool with the one the head, and place the shorter bolts and washers to secure the tool.\u003c\/li\u003e\n\u003cli\u003ePlace the retainer cap on top of the retainer, lubricate the long bolt with provided grease and start turning the long bolt clockwise with the help of a wrench (14mm) to apply pressure to the retainer cap and compress the valve spring until the keepers are completely visible and can come out.\u003c\/li\u003e\n\u003cli\u003eUsing the magnetized end of the screw driver remove the keepers.\u003c\/li\u003e\n\u003cli\u003eTo reinstall the valve assembly, place the valve (if removed for some reason), valve seals, valve spring, and retainer; compress the assembly using the same steps as above.\u003c\/li\u003e\n\u003cli\u003ePlace a small amount of the provided grease on the flat tip of the screw driver and place a keeper over it, the grease will hold the keeper in place and allow you to place the keepers easily.\u003c\/li\u003e\n\u003cli\u003eOnce keepers are in place, start turning the bolt counterclockwise to relieve the pressure of the valve spring.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ca style=\"color: #afafaf;\" href=\"https:\/\/stmtuned.com\/collections\/euroexport-products\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more EuroExport Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"EuroExport","offers":[{"title":"Default Title","offer_id":50565362057558,"sku":"EE-SC-30015","price":114.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/SC-30015-euroexport-k20-k24-f20c-f22c-valve-spring-compressor-tool-1.jpg?v=1749225107"},{"product_id":"euroexport-b18-b20-valve-spring-compressor-tool","title":"EuroExport Valve Spring Compressor Tool for B18A B18B B20 Non-VTEC (SC-30012)","description":"The EuroExport valve spring compressor tool for B18A\/B18B\/B20 Non-VTEC Honda\/Acura makes installing valve springs easy! Simply align the holes on the aluminum body of the valve spring compressor with the ones on the head, bolt it in, place the valve spring, retainer and retainer cap on the retainers, bolt down the long bolt, place the keepers using the magnetized screwdriver and it's done!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003eHonda\/Acura B18A B18B B20 (NON-VTEC)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures:\u003c\/span\u003e\u003cbr\u003e• CNC machined 6061 anodized aluminum\u003cbr\u003e• Can be used with the head on the block\u003cbr\u003e• Will not slip and scratch or damage your head like universal clamp type valve spring compressors\u003cbr\u003e• No need to remove the rocker arm shafts\u003cbr\u003e• Included is a small magnetized screw driver to very easily remove or install the keeper\u003cbr\u003e• Made in the USA\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eIncludes:\u003c\/span\u003e\u003cbr\u003e• Billet Valve Spring Compressor Body\u003cbr\u003e• Retainer Cap\u003cbr\u003e• Long Main Bolt\u003cbr\u003e• Anchor Bolts and Hardware\u003cbr\u003e• Magnetic Screwdriver\u003cbr\u003e• Install Lube\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eInstall Tips:\u003c\/span\u003e\u003cbr\u003eIf using with the head on the block, cylinders need to be pressurized to 100PSI to prevent the valve from falling into the cylinder. If using with the head out of the engine compartment, put something bellow the valve to keep it pressed upward.\u003cbr\u003e\n\u003col\u003e\n\u003cli\u003ePlace the dowel pins with the thinner end in the block and the wider end facing up. Align the holes on the tool with the dowel pins, and place the shorter bolts and washers to secure the tool.\u003c\/li\u003e\n\u003cli\u003ePlace the retainer cap on top of the retainer, lubricate the long bolt with provided grease and start turning the long bolt clockwise with the help of a wrench (14mm) to apply pressure to the retainer cap and compress the valve spring until the keepers are completely visible and can come out.\u003c\/li\u003e\n\u003cli\u003eUsing the magnetized end of the screw driver remove the keepers.\u003c\/li\u003e\n\u003cli\u003eTo reinstall the valve assembly, place the valve (if removed for some reason), valve seals, valve spring, and retainer; compress the assembly using the same steps as above.\u003c\/li\u003e\n\u003cli\u003ePlace a small amount of the provided grease on the flat tip of the screw driver and place a keeper over it, the grease will hold the keeper in place and allow you to place the keepers easily.\u003c\/li\u003e\n\u003cli\u003eOnce keepers are in place, start turning the bolt counterclockwise to relieve the pressure of the valve spring.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ca href=\"https:\/\/stmtuned.com\/collections\/euroexport-products\" style=\"color: #afafaf;\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more EuroExport Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"EuroExport","offers":[{"title":"Default Title","offer_id":50565362418006,"sku":"EE-SC-30012","price":114.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/SC-30012-euroexport-b18-b20-valve-spring-compressor-tool-1.jpg?v=1749225111"},{"product_id":"euroexport-subaru-ej25-valve-spring-compressor-tool-kit","title":"EuroExport Valve Spring Compressor Tool for Subaru EJ25 (SC-50010)","description":"The EuroExport Subaru EJ25 valve spring compressor tool makes installing valve springs in your 2002-2014 WRX\/STi easy! Simply align the holes on the aluminum body of the valve spring compressor with the ones on the head, bolt it in, place the valve spring, retainer and retainer cap on the retainers, bolt down the long bolt, place the keepers using the magnetized screwdriver and it's done!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003eSubaru EJ25 DOHC\u003cbr\u003e2002-2014 Subaru WRX\u003cbr\u003e2004-2014 Subaru STi (Not for 2015+)\u003cbr\u003eAlso fits some 2002-2014 Forester, Legacy, Baja, Impreza and Outback models with the EJ25 DOHC engine.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures:\u003c\/span\u003e\u003cbr\u003e• CNC machined 6061 anodized aluminum\u003cbr\u003e• Can be used with the head on the block\u003cbr\u003e• Will not slip and scratch or damage your head like universal clamp type valve spring compressors\u003cbr\u003e• No need to remove the rocker arm shafts\u003cbr\u003e• Included is a small magnetized screw driver to very easily remove or install the keeper\u003cbr\u003e• Made in the USA\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eIncludes:\u003c\/span\u003e\u003cbr\u003e• Billet Valve Spring Compressor Body\u003cbr\u003e• Retainer Cap\u003cbr\u003e• Main Bolt\u003cbr\u003e• Magnetic Screwdriver\u003cbr\u003e• Install Lube\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-style=\"color: #ff2a00;\"\u003eInstall Tips:\u003c\/span\u003e\u003cbr\u003eIf using with the head on the block, cylinders need to be pressurized to 100PSI to prevent the valve from falling into the cylinder. If using with the head out of the engine compartment, put something below the valve to keep it pressed upward.\u003cbr\u003e\n\u003col\u003e\n\u003cli\u003eAlign the holes on the tool with the one the head, and place bolts and washers to secure the tool.\u003c\/li\u003e\n\u003cli\u003ePlace the retainer cap on top of the retainer, lubricate the included long bolt with provided grease and start turning the long bolt clockwise with the help of a wrench (14mm) to apply pressure to the retainer cap and compress the valve spring until the keepers are completely visible and can come out.\u003c\/li\u003e\n\u003cli\u003eUsing the magnetized end of the screw driver remove the keepers.\u003c\/li\u003e\n\u003cli\u003eTo reinstall the valve assembly, place the valve (if removed for some reason), valve seals, valve spring, and retainer; compress the assembly using the same steps as above.\u003c\/li\u003e\n\u003cli\u003ePlace a small amount of the provided grease on the flat tip of the screw driver and place a keeper over it, the grease will hold the keeper in place and allow you to place the keepers easily.\u003c\/li\u003e\n\u003cli\u003eOnce keepers are in place, start turning the bolt counterclockwise to relieve the pressure of the valve spring.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ca style=\"color: #afafaf;\" href=\"https:\/\/stmtuned.com\/collections\/euroexport-products\" data-mce-style=\"color: #afafaf;\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\" data-mce-style=\"font-size: .8em;\"\u003e See more EuroExport Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"EuroExport","offers":[{"title":"Default Title","offer_id":50565362516310,"sku":"EE-SC-50010","price":94.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/SC-50010-euroexport-ej25-valve-spring-compressor-tool-1.jpg?v=1749225113"},{"product_id":"euroexport-valve-spring-compressor-tool","title":"EuroExport Valve Spring Compressor Tool for 4G63 Evo\/DSM (SC-40011)","description":"The EuroExport 4G63 valve spring compressor tool makes installing valve springs in your DSM or Evo easy! Simply align the holes on the aluminum body of the valve spring compressor with the ones on the head, bolt it using the provided short bolts, place the valve spring, retainer and retainer cap on the retainers, bolt down the long bolt, place the keepers using the magnetized screwdriver and it's done! \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003eMitsubishi 4G63\/4G63T\u003cbr\u003e1992-2006 Evolution I-IX\u003cbr\u003e1990-1999 Eclipse GST\/GSX\u003cbr\u003e1990-1998 Talon TSi\u003cbr\u003e1990-1994 Laser RS\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures:\u003c\/span\u003e\u003cbr\u003e• CNC machined 6061 anodized aluminum\u003cbr\u003e• Can be used with the head on the block\u003cbr\u003e• Will not slip and scratch or damage your head like universal clamp type valve spring compressors\u003cbr\u003e• No need to remove the rocker arm shafts\u003cbr\u003e• Included is a small magnetized screw driver to very easily remove or install the keeper\u003cbr\u003e• Made in the USA\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eIncludes:\u003c\/span\u003e\u003cbr\u003e• Billet valve spring compressor body\u003cbr\u003e• Retainer cap\u003cbr\u003e• Two short bolts\u003cbr\u003e• One long bolt with rounded tip\u003cbr\u003e• Magnetic screwdriver\u003cbr\u003e• 4G63T (EVO\/DSM) adapter ring\u003cbr\u003e• Install Lube\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eInstall Tips:\u003c\/span\u003e\u003cbr\u003eIf using with the head on the block, cylinders need to be pressurized to 100PSI to prevent the valve from falling into the cylinder. If using with the head out of the engine compartment, put something below the valve to keep it pressed upward.\u003cbr\u003e\n\u003col\u003e\n\u003cli\u003eAlign the holes on the tool with the one the head, and place the shorter bolts and washers to secure the tool.\u003c\/li\u003e\n\u003cli\u003ePlace the retainer cap on top of the retainer, lubricate the long bolt with provided grease and start turning the long bolt clockwise with the help of a wrench (14mm) to apply pressure to the retainer cap and compress the valve spring until the keepers are completely visible and can come out.\u003c\/li\u003e\n\u003cli\u003eUsing the magnetized end of the screw driver remove the keepers.\u003c\/li\u003e\n\u003cli\u003eTo reinstall the valve assembly, place the valve (if removed for some reason), valve seals, valve spring, and retainer; compress the assembly using the same steps as above.\u003c\/li\u003e\n\u003cli\u003ePlace a small amount of the provided grease on the flat tip of the screw driver and place a keeper over it, the grease will hold the keeper in place and allow you to place the keepers easily.\u003c\/li\u003e\n\u003cli\u003eOnce keepers are in place, start turning the bolt counterclockwise to relieve the pressure of the valve spring.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ca style=\"color: #afafaf;\" href=\"https:\/\/stmtuned.com\/collections\/euroexport-products\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more EuroExport Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"EuroExport","offers":[{"title":"Default Title","offer_id":50565362549078,"sku":"EE-SC-40011","price":81.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/SC-40011-euroexport-valve-spring-compressor-tool-4g63-1.jpg?v=1749225116"},{"product_id":"euroexport-valve-seal-installation-tool","title":"EuroExport Valve Seal Installation Tool (VSIT10003)","description":"The EuroExport valve seal install tool makes it easy to evenly install valve seals without damaging them in the process. Compatible with many heads including 4G63, EJ25, B16, B18, H22, D16, K20, K24, B18A, B18B and B20. Made from PVC for increased lifetime and durability and CNC machined for precision.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eVehicle Fitment:\u003c\/span\u003e\u003cbr\u003e• Mitsubishi 4G63 (DSM\/GVR4\/Evo)\u003cbr\u003e• Subaru EJ25 (WRX\/STi)\u003cbr\u003e• Honda\/Acura VTEC B16, B18, H22, D16, K20, K24\u003cbr\u003e• Honda\/Acura NON-VTEC B18A, B18B, B20 LS \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFeatures:\u003c\/span\u003e\u003cbr\u003e• CNC Machined PVC\u003cbr\u003e• Made in the USA\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eIncludes:\u003c\/span\u003e\u003cbr\u003e(1) Tool)\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/stmtuned.com\/collections\/euroexport-products\" style=\"color: #afafaf;\"\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: .8em;\"\u003e See more EuroExport Products\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/a\u003e","brand":"EuroExport","offers":[{"title":"Default Title","offer_id":50565362975062,"sku":"EE-VSIT10003","price":22.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/files\/VSIT10003-euroexport-valve-seal-installation-tool-1.jpg?v=1749225117"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/9531\/8102\/collections\/euroexportinc-web-logo-small_1470328292__60600.png?v=1779797181","url":"https:\/\/www.speed-addicts.com\/en\/collections\/euroexport.oembed","provider":"Speed Addicts","version":"1.0","type":"link"}